20 Best 1996 Honda Accord Muffler Replacement Cost of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best 1996 Honda Accord Muffler Replacement Cost of 2023. Check our ranking below.

2,947 Reviews Scanned

Rank No. #1

Walker Exhaust SoundFX 18879 Direct Fit Exhaust Muffler 1.625" Outlet (Outside)

RESISTS CORROSION -- Aluminized steel construction and internal drainage system helps reduce corrosion
BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
EASY TO INSTALL -- Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn't require specialized fabrication and/or welding
FACTORY SOUND -- Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER -- Designed and tested to extend muffler life

Rank No. #2

2PCS Exhaust Clamps Band Clamp,Connect Exhaust System Components Narrow Band Muffler Clamp for Exhaust Pipe,Muffler,Elbow,Exhaust Tubing (3.0inch/2pcs)

【Lowest Cost Exhaust Repair】 - 3.0" exhaust clamp for connecting and securing exhaust pipes from 3.0" ID to 3.0" OD, 1.22inch wide. the lowest cost and easiest way to repair burst or disconnected exhaust pipes.
【360°Reliable Fasteners】 - The "I"-aluminium block reserved in the exhaust clamp kit allows the butt band clamp to seal the pipe at 360° while ensuring equal pressure distribution, never deforming or leaking the pipe.it's the ideal solution for repairing muffler ends or connecting pipes in a wide range of applications.
【Durable Quality】- The band clamp is made of 304 stainless steel, which has been selected for its excellent rust and weather resistance and offers great protection to the exhaust pipe in harsh environments such as high temperatures and humidity.The narrower width does not affect the aesthetics of the exhaust pipe.
【Easy to install】-No welding for exhaust pipe connections and muffler repairs! There are no complicated steps, the installation is straightforward with a nut and bolt fit and the job is done. Not only does it save effort, but the pipe repair clamp can also be reused.
【Satisfactory After-sales guarantee】: In case of quality problems, we are prepared to send you a new one free of charge or a full refund. If you have any dissatisfaction or needs, please email us and thank you for your support!

Rank No. #3

1PCS Exhaust Clamp - Heavy Duty 304 Stainless Steel Muffler Clamp Pipe Repair Clamp- Emergency Pipe Repair Kit for Various Pipes (2.25inch/1pcs)

【Muffler exhaust repair clamp】: These exhaust clamps are suitable for OD-2.25 inch pipes, width-2.98inch,which can play a good role in fixing, low cost solution to the exhaust pipe resonance, rapid acceleration exhaust resonance problem, a good solution to run high-speed car buzzing sound.
【Pipe repair clamp】：2.25 exhaust clamp, the perfect ring locking design allows the pipe to be subjected to 360° of uniform pressure, thus not deforming and providing a perfect seal. It is not only suitable for repairing exhaust pipes, but also for repairing all kinds of pipes that have leaks or need to be connected.
【High quality】: Good materials determine good quality. To create the most durable automotive replacement exhaust clamps, we use 304 stainless steel, which is resistant to deformation and rust, and is durable and reusable, and can withstand a variety of complex construction environments.
【Easy to install】:Exhaust clamps 2.25 inch no welding required! You will receive matching M10 bolts and nuts, steel spacers and aluminium I-blocks for easy installation without complicated installation steps. The ideal solution for bunching or connecting pipes.
【Satisfactory after-sales guarantee】: In case of quality problems, we are prepared to send you a new one free of charge or a full refund. If you have any dissatisfaction or needs, please email us and thank you for your support!

Rank No. #4

Walker Exhaust SoundFX Universal 18101 Universal Exhaust Muffler

INHIBITS CORROSION -- Aluminized-steel construction and internal drainage system helps inhibit corrosion
BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
FLEXIBLE SOLUTION -- Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
FACTORY SOUND -- Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER -- Designed and tested to extend muffler life

Rank No. #5

Walker Exhaust Quiet-Flow Stainless Steel 55074 Direct Fit Exhaust Muffler Assembly

CORROSION RESISTANT STAINLESS STEEL -- The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
EASY TO INSTALL -- Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn't require specialized fabrication and/or welding
BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
PREMIUM ACOUSTIC CONTROL -- OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
DESIGN VALIDATED -- Acoustic and flow tested for quality OE-style sound you can count on

Rank No. #6

Miytsya 2 PCS Turbo Sound Whistle Simulator, 4.05In x 2.32In Universal Aluminum Turbo Sound Whistle Exhaust Muffler Pipe Blow off Valve Muffler Sound Booster Car Styling Running Accessories (Red)

★ Feature: The motorcycle turbo whistle is a whistle, an aluminum whistle on the exhaust pipe that air passes through to make it sound and make your car sound more powerful, and it makes a cool turbo sound as the airflow rushes through the exhaust pipe.
★ Durable Material: The car turbo sound whistle is made of aluminum alloy material, which is not easy to fade, resistant to wear and tear, and light weight. Easy to clean, long service life, reducing replacement cost.
★ Universal Fit: This exhaust whistle measures 4.05 x 2.32 inches, fits most vehicles with straight exhaust pipe, such as cars, motorcycle, truck, bike, scooter, motorbike, and more.
★ Easy to Install: It comes with L spanner and bolts, loosen the bolt on the turbo sound whistle, place the turbo sound whistle body inside the exhaust muffler with the larger opening facing the inside of the muffler, tighten the bolt. So it won't fall off.
★ After Sale: If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.

Rank No. #7

Rear Muffler - Compatible with 1994-1997 Honda Accord LX Wagon 2.2L 4-Cylinder

Federal and California
Compatible with or fits: 1994 - 1997 Honda Accord LX Wagon 2.2L 4 Cyl
Rear Muffler
Review Description to Ensure Proper Fit

Rank No. #8

Mac Auto Parts Muffler Exhaust Pipe System For 1994 Honda Accord DX 2 or 4 Door Coupe Sedan

Please see your year, make and model in the product details
Features outstanding durability and consistent performance designed to meet or exceed OE Specifications.
Manufactured by ISO certified factories to meet requirements of fit, form and function
Thoroughly inspected for high quality parts and workmanship
10 Year Warranty

Rank No. #9

Exhaust Rubber Hanger, 2PCS Insulator Bushing Mount with 4 Holes, Adjustable Muffler Shock Absorber Bracket, Automotive Accessories Universal for Most Cars

【DURABLE RUBBER】: The exhaust hanger is made of a tough rubber material that is hard enough to resist any wear, corrosion or rust. The rubber material is very durable, even if it is exposed to high temperatures for a long time, it will not crack. We adopt the best quality material to bring you the longest use.
【REPLACEMRNT PARTS】: Rubber muffler hangers can better fix your exhaust pipe and effectively reduce annoying vibration and noise. In addition, it also prevents the exhaust pipe from scraping along the ground which greatly extends the life of the exhaust pipe.
【UNIVERSAL FIT】: You will receive 2 exhaust brackets which are 10.8cm (4.25") long, 2.3cm (0.9") high and have a round hole diameter of 11mm (0.44"). It is universal for most cars, but we still recommend that you double check the size before you buy.
【4 HOLES】: This exhaust hanger is a 4-hole design, which allows the height of the hanger to be adjusted and extended to the muffler, allowing the distance of the metal hanger to be extended. It is a perfect car replacement accessory to replace your old exhaust unit.
【FRIENDLY SERVICE】: We will try our best to provide customer good quality at great cost and create you a more enjoyable driving experience. We test every item and ship it only after 100% guarantee in good condition. For technical, installation and usage questions, please feel free to contact us.

Rank No. #10

gunhunt 2 PCS Exhaust Pipe Clamps, Stainless Steel Exhaust Muffler Clamp, Joint Band Clamp, Universal Pipe Repair Parts, Exhaust Pipe Fixer (Silver #2In)

Stainless Steel Material: The exhaust pipe clip is made of stainless steel material. The width of the exhaust pipe clip is enough to meet most pipe. Stainless steel materials can withstand high temperatures. In severe weather, the exhaust pipe clip can also be used normally without rust. The exhaust pipe clip is designed to protect the exhaust pipe, perfectly play a maintenance role.
Protection Function: The band of the exhaust pipe clip can protect the port of the pipeline, uniformly tolerate the stretching force and prevent the deformation and leakage of the exhaust pipe. There are two screws that can be fixed at the bottom of the exhaust pipe clip to ensure that the surface of the stainless steel is close to the exhaust pipe, making it easier for installation and disassembly.
Product Parameters: The diameter length of the exhaust pipe clip is 2In to adapt to a variety of exhaust pipes. After buying, you will receive 2 x exhaust pipe clips, 4 x the fixed screws that need to install at the bottom of the exhaust pipe clip. Enough accessories help you complete your installation, you can use it with confidence. The exhaust pipe clip can meet your various needs and greatly reduce costs and time.
Simple Installation: The installation of the exhaust pipe clip is simple, and it can be completed without using too many tools. If you are worried that the screws of the exhaust pipe clip are not easy to fix, you can use a tool to tighten the screw to ensure that it creates the best sealing and can work normally during use.
Widely Used: The use of exhaust pipe clips is widey, which is suitable for fixation of automotive pipelines, and can also be used for the fixation and protection of engineering pipelines. The exhaust pipe clip of stainless steel can be installed quickly and can be reused. The exhaust pipe clip can provide longer service life.

Rank No. #11

BBTO Heat Reflective Sheet Adhesive Backed Aluminized Fiberglass Heat Shield Tape Protection Barrier Heat Shield Resistant Material for Hose and Auto Use Heat Insulation Sheet(Silver, 12 x 24 Inch)

Size: the aluminized fiberglass sheet measures approx. 30 x 60 cm/ 12 x 24 inch, large size to use in daily life, you can simply trim the sheet into wanted shape or size to satisfy your various projects
High temperature resistance: this adhesive backed heat barrier can withstand high temperature, its reflective surface can still screen off the heat and provide utmost protection, effectively protect parts and components, like painted surfaces and plastic parts, from damaging radiant heat
Convenient to apply: innovatively designed with adhesive composite on its back, the heat shield protection barrier cover can be easily wrapped or laid on to any desired surfaces with a professional-like finish, make it clean and tidy
Multiple applications: the aluminized fiberglass sheet is a helpful addition in your life, can be applied to any cable, wire, plastic components, painted surfaces, doors, hoods for added heat protection, suitable for automotive parts, home repair, computer repair and more, finished edges to avoid fraying
Reliable material: this heat shield protection barrier cover is made of glass fiber fabric with an aluminized outer facing, durable and reliable to use, can provide ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime

SaleRank No. #12

Nilight - CL-86 635Pcs Car Push Retainer Clips-16 Most Popular Sizes Nylon Bumper Fender Rivets Kit with 10 Cable Ties and Fasteners Remover for Toyota GM Ford Honda Acura Chrysler

UNIVERSAL FIT KIT: - Great assortment push retainer kit with 16 most popular size, fitting for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers replacement,compatible with Ford, GM, Chrysler, Toyota, Honda and more. All packed in a plastic container for easy organization and storage.
TOP QUALITY: - These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
PREFECT FOR WHAT YOU NEED: - Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
BONUS ACCESSORIES: - We provide different size fastener removers and cable ties to help you quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.

SaleRank No. #13

GOOACC - GRC-33 240PCS Bumper Retainer Clips Car Plastic Rivets Fasteners Push Retainer Kit Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Fender Clips for GM Ford Toyota Honda Chrysler

UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.
HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
EASY STORAGE - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car.

SaleRank No. #14

Walker Exhaust 35286 Exhaust System Hanger Insulator

OE DESIGN -- Designed with OE-style features for easy installation and fit
PREMIUM MATERIALS -- Made from high-quality materials for durability and long life
AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for a quality vehicle repair
KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components
BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Rank No. #15

Dorman 674-509 Exhaust Manifold Kit - Includes Required Gaskets and Hardware Compatible with Select Acura / Honda / Isuzu Models

Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance
Complete repair - includes all necessary gaskets and downpipe hardware
Trustworthy design - built by industry leader in aftermarket manifolds
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool

SaleRank No. #16

GOOACC 635Pcs Car Push Retainer Clips & Auto Fasteners Assortment -16 Most Popular Sizes Nylon Bumper Fender Rivets with 10 Cable Ties and Fasteners Remover for Toyota GM Ford Honda Acura Chrysler

【UNIVERSAL FIT KIT】- The kit contains 16 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that you’ll always have the right size.
【TOP QUALITY】- These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
【PREFECT FOR WHAT YOU NEED】 - Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
【BONUS ACCESSORIES】- We provide different size fastener removers and cable ties to help you quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
【WIDE APPLICATION】- Professional push clips are widely used for car panel, door trim, bumper and fender for GM Ford Toyota Honda Chrysler etc.

Rank No. #17

Offset Oxygen Sensor Socket, 3/8-Inch Drive, 7/8-Inch (22mm), Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Cars

PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function. The tool meets and exceeds ANSI/ASME standards.
DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8" drive oxygen sensor socket is also offset and compact, providing extra leverage even in hard-to-reach locations.
FEATURES: 7/8" (22mm) socket fits most oxygen sensors, works with any 3/8" drive ratchet or breaker lever, offset drive gate with wire links the sensor from the side to prevent damage to the wires.
FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this quality tool will save you time! to help your car's emissions and fuel consumption.
WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time, we will reply you within 24 hours.

Rank No. #18

JUSTTOP Car Tire Valve Stem Caps, 12pcs Air Caps Cover, Universal for Cars, SUVs, Bike, Trucks and Motorcycles-Black

Valve caps can protect the valve, prevent the water, dust or sand into the tire; preventing the valve from leaking, ensure the safe driving.
Easy to install, 12pcs valve stem caps, it's can easily tightened use your hand. Beautiful appearance, fits vehicles of various colors，and these are great car accessories gifts for men.
The valve cap is made of good quality and durable aluminum alloy, enhanced seal to help prevent air leakage.
Universal size fits more cars, bus trucks, SUVs, motorcycle, bike or bicycle.
Any issues or questions please feel free to contact us, we are always here to satisfy all of you.

Rank No. #19

Red Hound Auto 4pc Exhaust Insulators Reduce Vibration Compatible with Acura Legend Integra Honda Civic & More - Hanger Check Listing for Full Application Details

4 Red Hound Auto Premium Exhaust Insulators
Approximately 2-7/8" x 2-1/8" x 7/8"; Note: Some applications vary by specific engine sizes, so it is important to check compatibility/application notes to confirm it will fit your model and/or engine size
Compatible with Ford/Mazda/Saturn/Honda/Acura: CL 1997-1999 (3.0L), EL 1997-2003, Integra 1986-2001, Legend 1986-1995; Escort 1991-2003, Accord 1976-2016, Civic 1980-2005, Prelude 1979-2001, 323 1986-1994, Miata 1990-1997, SL 1991-2002
Insulates while reducing vibration
Premium Heavy Duty Automotive Grade Rubber

Rank No. #20

DODOFUN Ice Blue T5 37 74 LED Bulb with Twist Lock Socket PC74 PC37 Dashboard Instrument Panel Gauge Cluster Light Pack of 10

Advantage: 3030 chipset, high brightness, more stable, high cost performance
Direct replacement for all T5 Wedge Type 17 18 37 70 73 74 79 85 86 2721 and PC74 PC37 PC118 882 size
Application reference: dashboard instrument panel ,gauge cluster, indicator, and map light, vanity mirror light, glove box light etc. interior light
Notice: if the LED does not light up, please simply flip it 180 degrees to reverse the polarity, just make sure the polarity is correct, it is better to compare the led bulb size with your original bulb size
warm tip: some car models comes with colored lampshade which will make the lighting color tiny different, it is physical phenomenon, it is very normal

Last update on 2023-08-17 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 1996 Honda Accord Muffler Replacement Cost?

Do you get stressed out thinking about shopping for a great 1996 Honda Accord Muffler Replacement Cost? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 1996 Honda Accord Muffler Replacement Cost, which is why we have assembled a comprehensive list of the greatest 1996 Honda Accord Muffler Replacement Cost available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 1996 Honda Accord Muffler Replacement Cost that you consider buying. Your questions might include the following:

Is it worth buying an 1996 Honda Accord Muffler Replacement Cost?
What benefits are there with buying an 1996 Honda Accord Muffler Replacement Cost?
What factors deserve consideration when shopping for an effective 1996 Honda Accord Muffler Replacement Cost?
Why is it crucial to invest in any 1996 Honda Accord Muffler Replacement Cost, much less the best one?
Which 1996 Honda Accord Muffler Replacement Cost are good in the current market?
Where can you find information like this about 1996 Honda Accord Muffler Replacement Cost?

We’re convinced that you likely have far more questions than just these regarding 1996 Honda Accord Muffler Replacement Cost, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 1996 Honda Accord Muffler Replacement Cost, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 1996 Honda Accord Muffler Replacement Cost. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an 1996 Honda Accord Muffler Replacement Cost buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 1996 Honda Accord Muffler Replacement Cost currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 1996 Honda Accord Muffler Replacement Cost has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 1996 Honda Accord Muffler Replacement Cost?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 1996 Honda Accord Muffler Replacement Cost.
Customer Ratings: Number ratings grade 1996 Honda Accord Muffler Replacement Cost objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 1996 Honda Accord Muffler Replacement Cost.
Product Quality: You don’t always get what you pay for with an 1996 Honda Accord Muffler Replacement Cost, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 1996 Honda Accord Muffler Replacement Cost is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining 1996 Honda Accord Muffler Replacement Cost information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 1996 Honda Accord Muffler Replacement Cost is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

20 Best 1996 Honda Accord Muffler Replacement Cost of 2023 – Romance University

How Do You Buy The Best 1996 Honda Accord Muffler Replacement Cost?

Related Post: