20 Best 2000 Honda Accord Muffler Replacement of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best 2000 Honda Accord Muffler Replacement of 2023. Check our ranking below.

2,043 Reviews Scanned

Rank No. #1

Rear Muffler Assembly With Gasket Replacement Part For 98-02 Honda Accord 2.3L 2 & 4DR

Rank No. #2

Resonator Extension Pipe & Muffler Replacement Part For Honda Accord 2.3L 4 Door 98-02

This is a brand new ULTRA FIT BRAND , MADE IN USA / CANADA OE Replacement exhaust. This will fit: HONDA , Accord 4 Door , 2.3L engine , 4 door Converter back system Includes 1x 76 9B251 1st Extension pipe 1x 76 9B252 2nd Extension pipe 1x 7276 rear muffler 1x 383 gasket 1x 334 gasket 1x 55260 Connector

Rank No. #3

Walker Exhaust Quiet-Flow Stainless Steel 53258 Direct Fit Exhaust Muffler Assembly 1.75" Inlet (Inside) 2" Outlet (Outside)

CORROSION RESISTANT STAINLESS STEEL -- The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
EASY TO INSTALL -- Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn't require specialized fabrication and/or welding
BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
PREMIUM ACOUSTIC CONTROL -- OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
DESIGN VALIDATED -- Acoustic and flow tested for quality OE-style sound you can count on

Rank No. #4

Exhaust System Replacement Part For 1998-2002 Accord 3.0 V6 4DR Dual Muffler

Direct replacement for a trouble-free installation
OE-style sound and quality appearance
100% aluminized construction
Manufactured to meet or exceed expectations for performance and fit
5 Year Warranty

Rank No. #5

TOTALFLOW 20014 Straight Through Universal Exhaust Muffler | 409 Stainless Steel | 2 Inch Inner Diameter Inlet/Outlet

TOTALFLOW 20014 Straight Through Exhaust Muffler 409 Stainless Steel 4" Round Body Width 6" Body Length 12" Overall Length 2" Inner Diameter Inlet/Outlet
409 Stainless Steel Construction With Stainless Steel Mesh and Internal Fill For Perfect Sound Tuning
Fully MIG welded for long life
Made from heavy gauge material TOTALFLOW is a USA - California based company
Fit Type: Universal Fit

Rank No. #6

Spec-D Tuning 2.5" Inlet 3.875" Slant Titanium Burnt Stainless Steel Exhaust Muffler Tip

✔️ All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!
✔️ Items are Exactly the Same as Shown in the Images! You Will Receive the Exact Item You Purchased!
✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!
✔️ 30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!
✔️ FITMENT: Fit for most domestic & import vehicle with 2.5" tip muffler.

Rank No. #7

TOTALFLOW 2102 Mini Muffler 409SS | 3" Round Width | 10" Body 12" Overall Length | 2" Inner Inlet-2" Outer Diameter Outlet

TOTALFLOW 2102 Mini Race Exhaust Muffler | 409 Stainless Steel | 3 Inch Round Body Width | 10 Inch Body Length | 12 Inch Overall Length | 2 Inch Inner Diameter Inlet - 2 Inch Outer Diameter Outlet. Fit Type: "Universal Fitment". To help us maintain the lowest prices online, please double check your exhaust size prior to placing your order to avoid restocking and inbound/outbound shipping fees
Constructed from Heavy "Approx. ±16" Gauge 409 Stainless Steel, With 100% Stainless Steel Mesh Internal Fill For Perfect Sound Tuning. Free flow muffler, straight through perforated stainless steel core wrapped with stainless steel mesh to enhances sound, exhaust flow & improves performance.
State of the art - TOP NOTCH - TIG welded for long life. Perfect for any custom exhaust project or muffler upgrade. "UNLEASH THE BEAST WITHIN"
We take pride in our work and products, Top Notch Craftsmanship that is compared to NO ONE in the industry. Compact Race Bullet Mini Universal Muffler - Will Fit Anywhere -not a direct fit. Please note that some adaptation required.
For FITMENT or WARRANTY information, please refer to the MANUFACTURER site.

Rank No. #8

4'' inch Adjustable Stainless Steel Round Exhaust Muffler Tip Removable Silencer Inner Silence

Mounting Size : 4.0"-4.21"(101.5-107mm) , Fit Universal 4'' inch Muffler Round Tips
Effectively Reduce Noise and deep From Muffler,Ability for Sound Level Adjustments from Opening Or Closing The Silencer
Installation : Put the silencer into muffler ,and adjust the nut to the tightest state

Rank No. #9

4 inches Double Walled Rolled Muffler Tip Cat-Back Exhaust System Compatible with Honda Accord 2.3L 4-Cylinder 1998-2002, Stainless Steel

Vehicle Compatibility - This cat-back exhaust is compatible with Honda Accord 2.3L 4-Cylinder 1998-2002.
Brilliant Performance - Come with [1] high performance racing design exit cat-back exhaust, can instantly increase 15 to 25 horsepower or low end torque, maximize to enhance the high exhaust air flow rate without sacrificing the attractive power sound in the smoothest conditions.
Extraordinary Quality - It is constructed of high quality aluminized steel with computerized mandrel-bends for the strength and durability, and the TIG welded CNC machine can resistant against pressure and corrosion.
Simple Installation - Easily for the installation, can make you enjoy the best performance in the fastest time.
Product Specification - Major Piping: 2.5" OD | Muffler Exhaust Tip: 4" OD | Inlet / Outlet : 2.5" OD | Muffler Tip Type: Round Roll Lip

Rank No. #10

Replacement Part For 1998-2002 Accord 2.3L 4 Door Converter With Exhaust System Muffler

Thi i Brand New Catalytic With Exhaut Muffler ytem than will fit the followingULTRA FIT BRANDMADE IN CANADA Accord 4 DoorFederal or California Emiion 2.3L engine 4 door Check Vehicle for Compatibility Converter back ytem Include 1 x CC20XLO2 Port in center Check thi Info1 x 761 1t Extenion pipe1 x 762 2nd Extenion pipe1 x 7276 Rear muffler 2 x 383 Gaket 1 x 334 Gaket 1 x 31645 Gaket 2 x MC178Hd Clamp 2 x 35460 Hanger1 x 55260 Connector

Rank No. #11

ESEWALAS Stainless Steel Exhaust Clamp,2.0” 2.25” 2.5” 2.75” 3.0” 4.0” Butt Joint Exhaust Pipe Muffler Band Clamp Sleeve Coupler,Exhaust Pipe Clamp Exhaust Band Clamp (2.5inch)

[High Quality] Stainless steel lap joint exhaust pipe clamp is made of high-quality 304 stainless steel, galvanized, with water corrosion resistance and rust prevention performance.
[Non Welded Design] The exhaust pipe clamp adopts a non welded design, which is easy to install or disassemble. Double stacked self-locking lock washers can prevent nuts from loosening.
[Size] Connect a pipeline with an outer diameter of 2.5 "to a pipeline with an outer diameter of 2.5". In addition, we offer five sizes of products for you to choose from, namely 2.0 "2.25" 2.75 "3.0" 4.0 ", to meet your needs. Please confirm the specifications and dimensions before purchasing.
[Features] The sealed exhaust clamp is a maintenance component of the muffler, and the reaction block provides a 360 ° evenly distributed tensile force to prevent pipeline deformation and form a seal around the connected exhaust components.
[Application] Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.

SaleRank No. #12

AUCELI Exhaust Hanger Removal Tool, Rubber Bracket and Exhaust Hanger Separation Hanger Removal Pliers, Muffler Hanger Removal Tool, Universal Vehicle Accessories for Car, SUV, Trunk

【Heavy Duty Material】:Our automotive exhaust rubber gasket removal pliers are made of high strength steel and are heavy duty. The metal is durable and corrosion resistant and will not break for long term use.
【Save Time and Effort】: The rubber bracket exhaust pliers contain points to support your removal and holes for removal, you just need to hold the handle of the pliers and give a firm squeeze to separate the rubber and exhaust bracket easily. This process will not waste a lot of your time.
【Easy to Use】: This product has its own unique design considerations, utilizing the leverage principle to save you time and effort. 25 degree offset handle with non-slip comfort grip for comfortable grip and optimal leverage when working in tight and hard to reach areas, making it easy for you to remove headaches.
【Application Range】: The exhaust hanger tool is suitable for all vehicles' exhaust systems and is also ideal for working on tailpipes, mufflers, etc. Feel free to buy our products whenever you need to replace your car parts, our products are sure to meet your needs.
【Great Serivce Support】: If you have any questions about this exhaust hanger removal pliers, simply contact customer service for troubleshooting help, parts, replacement or refund and we will get back to you as soon as possible. You are covered by our Performance Guarantee Limited Lifetime Warranty.

SaleRank No. #13

YOGEIER Car Exhaust Rubber Hanger, 2 Holes 11mm (0.43inch), Universal Exhaust Insulator Muffler Hanger, Muffler Bracket Bushing Mount (2pcs)

Universal Accessories: This rubber exhaust hanger fits most cars that use an easy-to-replace hanger system, consisting of two holes and a rubber-lined insulator bracket. Be sure to check the size and distance between the hooks before use to ensure the product is suitable for use.
Function: The high-density rubber muffler hanger effectively reduces the sound produced by the shaking and collision of the exhaust pipe. Reduce the height and contact surface between the exhaust pipe and the body to prevent the exhaust pipe from scratching along the ground.
Dimensions: Width: 73mm (2.9"); Height: 47mm (1.9"); Depth: 20mm (0.8") Bore: 11mm (0.43"). It is a universal vehicle tool for exhaust systems of cars, trucks, jeeps and SUVs. Be sure to measure the size before purchasing, so as not to be inappropriate for use.
Installation: First remove the muffler hanger from the exhaust system using the exhaust hanger removal tool. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the mounting nail on the exhaust pipe.
What You Will Get: 4× rubber exhaust hanger, this rubber exhaust hanger is essential, and it can effectively reduce the sound produced by shaking and hitting the car body. It can safely fix the exhaust pipe above the ground, no matter how bumpy the car is on the road, there will be no abnormal noise.

Rank No. #14

2 Pcs 2 Hole Exhaust Hanger Rubber, Universal Hole Size Diameter 0.47inch (12mm), Muffler Bracket Mount, Insulator Bracket For Car/Truck/SUV (Black)

High Quality Materials: Preferred silica gel material, with better wear resistance, high temperature resistance and strength, not easy to crack, effectively ensure the safety of exhaust, reduce vibration.
Product Size: 7.3cmx4.7cmx2.1cm(L × W × H), hole diameter 12cm. Please measure auto parts before purchasing.
Accessories: Includes 2pcs, general exhaust hanger bushing exhaust muffler, suitable for cars, motorcycles, SUVs
Product Functions: Exhaust pipe muffler lifting lug, effectively reduce the height of exhaust pipe and body and contact surface, reduce vibration and noise, helps fix the exhaust pipe position to .
Service --- If you have any questions about the product, you can contact us by email, we will solve you as soon as possible.

Rank No. #15

SINGARO Rubber Exhaust Hanger, Muffler Exhaust System, Heavy Insulator Support Bushing Installation, 4 Holes 0.47 Inch, High-Density Tailpipe Damping Hanger (4PCS Black)

【Material】 Made of EPDM rubber. Wear-Resistant and High-Temperature Resistant.Anti-aging, not easy to damage. Respond to different climate environments and continue to use.
【Function】 The high-density rubber muffler hanger effectively reduces the sound produced by the shaking and collision of the exhaust pipe. Keep the chassis quiet and stable when your car is driving special sections of the road.
【Dimensions】 4PCS Set of Exhaust Hanger. Length: 2.89in, Width: 1.86in, Height: 0.83in, Hole Diameter: 0.47in.
【Universal】 Rubber Exhaust Hangers fits almost all vehicles such as cars, SUVs, CRVs, Luxuriou, Subaru, trucks and vans, Jeeps, etc.please check the size of the your application before purchasing.
【Service】 We want your 100% satisfaction by providing high-quality products with premium materials and unique designs. We are standing by to assist you with any issues.

SaleRank No. #16

AOCISKA 2 Packs Exhaust Clamp,2.0” 2.25” 2.5” 3.0” Stainless Steel Joint Exhaust Pipe Muffler Clamp Band Butt Joint Band Clamp Sleeve Coupler,Used for Exhaust Pipe,Muffler,Elbow (2.25inch)

[High Quality] Stainless steel lap joint exhaust pipe clamp is made of high-quality 304 stainless steel and galvanized, which can resist water corrosion and rust.
[Various Specifications] Our 2.5-inch exhaust pipe clamp connects 2.5 "OD pipe to 2.5" OD pipe. In addition, we provide three different sizes to meet your needs. Please confirm the specification and size before purchasing.
[Easy to Install] The exhaust pipe clamp is designed without welding, which is fast, convenient and accurate. It allows flexible disassembly and repair, and can be reused.
[Unified Structure] These exhaust pipe clamps have a unified structure, which minimizes the complexity of the number of parts, and maximizes the material efficiency, thus reducing the weight.
[Features]The butt clamp is a simple and effective method to connect exhaust system components (such as pipes, mufflers and catalytic converters). The reaction block provides a 360 ° uniformly distributed tensile force to prevent pipe deformation and form a seal around the connected exhaust components.

Rank No. #17

Exhaust Rubber Hanger, 2PCS Insulator Bushing Mount with 4 Holes, Adjustable Muffler Shock Absorber Bracket, Automotive Accessories Universal for Most Cars

【DURABLE RUBBER】: The exhaust hanger is made of a tough rubber material that is hard enough to resist any wear, corrosion or rust. The rubber material is very durable, even if it is exposed to high temperatures for a long time, it will not crack. We adopt the best quality material to bring you the longest use.
【REPLACEMRNT PARTS】: Rubber muffler hangers can better fix your exhaust pipe and effectively reduce annoying vibration and noise. In addition, it also prevents the exhaust pipe from scraping along the ground which greatly extends the life of the exhaust pipe.
【UNIVERSAL FIT】: You will receive 2 exhaust brackets which are 10.8cm (4.25") long, 2.3cm (0.9") high and have a round hole diameter of 11mm (0.44"). It is universal for most cars, but we still recommend that you double check the size before you buy.
【4 HOLES】: This exhaust hanger is a 4-hole design, which allows the height of the hanger to be adjusted and extended to the muffler, allowing the distance of the metal hanger to be extended. It is a perfect car replacement accessory to replace your old exhaust unit.
【FRIENDLY SERVICE】: We will try our best to provide customer good quality at great cost and create you a more enjoyable driving experience. We test every item and ship it only after 100% guarantee in good condition. For technical, installation and usage questions, please feel free to contact us.

Rank No. #18

BESULEN 2 Inch Exhaust Clamp, 2 PCS Butt Joint Band Clamp Sleeve Coupler, Car Stainless Steel Muffler Band Clamp, Exhaust Pipes Repair Sleeve Connector, Car Exterior Accessories (2")

【Stainless Steel】: This exhaust pipe clamp is made of 304 stainless steel material, aluminum alloy L-block, zinc-plated flange bolts and nuts, steel gasket. Stainless steel material is not easy to rust, can withstand long-term sun and rain, excellent performance and very durable.
【Easy Installation】: No welding design makes installation and disassembly easier and less time consuming. Just unscrew the bolt, open the exhaust pipe clamp, then install it on the car's exhaust pipe, after adjusting it to the required installation position, tighten the nut to ensure a tight and firm fixation.
【Application Scope】: We provide three diameter sizes of exhaust pipe clamp for you to choose, which are 2 inch, 2.25 inch and 2.5 inch. They can be widely used for car exhaust pipes, mufflers, drop pipes, collector pipes, manifolds, etc. You can buy according to your need.
【Function】: The exhaust pipe clamp comes with an L-shaped block that creates a complete "inner circle seal" when clamping, which can create a better seal and help prevent exhaust gas and noise leakage. Besides, you can also use it for repairing exhaust pipes.
【Uniform Clamping Force】: The unique seal and high clamping load provides, evenly distributes the clamping force throughout 360° without distorting your exhaust components to prevent leaks and control material deformation. This is a very practical exhaust system docking clamp.

Rank No. #19

Walker Exhaust SoundFX 18904 Direct Fit Exhaust Muffler 2" Outlet (Outside)

INHIBITS CORROSION -- Aluminized-steel construction and internal drainage system helps inhibit corrosion
BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
EASY TO INSTALL -- Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn't require specialized fabrication and/or welding
FACTORY SOUND -- Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER -- Designed and tested to extend muffler life

Rank No. #20

Zlirfy Exhaust Clamp Exhaust Pipe Clamp,2.0” 2.25” 2.5” 2.75” 3.0” 4.0” Butt Joint Stainless Steel Clamp Band,Universal Widening Clamp Butt Joint Exhaust Clamp,Fit for Exhaust Pipe (2.5inch)

[High Quality and Durability]The exhaust pipe clamp is made of high-quality stainless steel, which is rust proof, waterproof, durable, and corrosion-resistant. It can be reused and has a long service life.
[6 Specifications]Our 2.5 inch exhaust clamp connects a pipe with an outer diameter of 2.5 "to a pipe with an outer diameter of 2.5". We have a total of 6 different sizes of exhaust clamps for you to choose from and purchase. Please confirm the specifications and dimensions before purchasing.
[Design Features] This stainless steel clamp band clamp is designed with a 360 degree full clamping zone, and the clamping force is evenly distributed throughout the entire 360 degree range to prevent leakage and control pipeline deformation.
[Easy to Install] This exhaust band clamp sleeve comes with fastening bolts. You only need to tighten or lose the bolts to connect or release. No welding required, easy to use.
[Application] Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.

Last update on 2023-07-30 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 2000 Honda Accord Muffler Replacement?

Do you get stressed out thinking about shopping for a great 2000 Honda Accord Muffler Replacement? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 2000 Honda Accord Muffler Replacement, which is why we have assembled a comprehensive list of the greatest 2000 Honda Accord Muffler Replacement available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 2000 Honda Accord Muffler Replacement that you consider buying. Your questions might include the following:

Is it worth buying an 2000 Honda Accord Muffler Replacement?
What benefits are there with buying an 2000 Honda Accord Muffler Replacement?
What factors deserve consideration when shopping for an effective 2000 Honda Accord Muffler Replacement?
Why is it crucial to invest in any 2000 Honda Accord Muffler Replacement, much less the best one?
Which 2000 Honda Accord Muffler Replacement are good in the current market?
Where can you find information like this about 2000 Honda Accord Muffler Replacement?

We’re convinced that you likely have far more questions than just these regarding 2000 Honda Accord Muffler Replacement, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 2000 Honda Accord Muffler Replacement, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 2000 Honda Accord Muffler Replacement. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an 2000 Honda Accord Muffler Replacement buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 2000 Honda Accord Muffler Replacement currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 2000 Honda Accord Muffler Replacement has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 2000 Honda Accord Muffler Replacement?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 2000 Honda Accord Muffler Replacement.
Customer Ratings: Number ratings grade 2000 Honda Accord Muffler Replacement objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 2000 Honda Accord Muffler Replacement.
Product Quality: You don’t always get what you pay for with an 2000 Honda Accord Muffler Replacement, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 2000 Honda Accord Muffler Replacement is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining 2000 Honda Accord Muffler Replacement information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 2000 Honda Accord Muffler Replacement is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

20 Best 2000 Honda Accord Muffler Replacement of 2023 – Romance University

How Do You Buy The Best 2000 Honda Accord Muffler Replacement?

Related Post: