Skip to content

20 Best Jld612 Temperature Controller of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Jld612 Temperature Controller of 2023. Check our ranking below.

2,590 Reviews Scanned

Rank No. #1
KETOTEK KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile
  • 【Wide temperature range.】The range for KT8230 is -22~572℉/-30~300℃,This is a relay temperature controller, There is no voltage output directly, you need to connect additional power supply for the load, then it can be set by differential (1~80℃/1~120℉) to turn on/off the load, it is like a switch.
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F~30.0°F/ -7℃~7℃ calibrate the temperature when there is error.
  • 【Safe protection.】Temperature Regulator will alarm when it exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low(LS) and high temperature limit(HS) to change the temperature range, LS < Setting Temperature < HS.
  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
SaleRank No. #2
PID Temperature Controller Meter Indicator, Jaybva High Voltage 100V to 240V PID Thermostat with K Thermocouple 25A SSR Fahrenheit and C Display Alarm Output TC and RTD Input
  • This PID temperature controller can read TEMPS in Fahrenheit (F) and Celsius(C) . Power-off memory function . Can be widely used in espresso machines , incubator , aquarium ,bottle blowing machine, packaging machine , plastic injection machine , textile machine , kiln , etc.
  • TC/RTD universal input , such as K , J , E , Pt100 etc. SSR solid state relay output .
  • Dual LED Display , Dual Output: 7 different Dual Output combinations with 1 relayed output and 1 SSR control voltage output.
  • This temperature controller has built in autotuning . After you have set your temps you press and hold the blue button for a few seconds and the AT light will come on and run through an auto tuning program to get you the best PID results.
  • Wide Application: This pid controller is widely used in auto system in line of light industry, chemistry, machinary , metallurgy, ceramics, pertrification industry, or temperature control and adjust system of food & beverage, smoker , incubator, oven; furnance, plastic extruder heating process etc.
SaleRank No. #3
bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
  • Simplified Design---Easy to set. Support °F display
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Warranty---1 year warranty for replacement or full refund without return.
  • Package Content--- Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
Rank No. #4
PID Temperature Controller, Digital Display REX-C100 Temperature Controllers Box with Solid State Relay SSR 40DA and K Thermocouple Probe, Universal 100-240V (PID+40DA SSR+Heat Sink+K Sensor)
  • 【Temperature Control Advantages】Our REX-C100 digital PID temperature controller kits can detect temperature range: 0~1300°C.Note: you will need to buy and install 400-1300°C probe sensor(not included in the package).
  • 【Quality Material】The temperature controller probe is sealed with stainless steel and resin, waterproof and rust-free. The other part is made of high-quality metal and plastic,it is environmentally friendly and durable.
  • 【Clear Digital Display】This Temperature Controller is adopted industrial-grade professional self-tuning PID technology, support reading with Centigrade or Fahrenheit unit, be able to display measured and Controller temperature.Compared with the traditional PID control, it has a rapid temperature control, small overshoot and high precision.
  • 【Wide Application】Our temperature controller can widely applied to IR far infrared oven equipment, drying equipment, printing and dyeing equipment, UV curing machine, plastic machinery, small water tank, and other scenarios that require electric heating and temperature control.
  • 【Product Including】REX-C100 PID temperature controller, SSR 40DA solid state relay,1m 0~400°C K-type probe sensor, white heat sink.
SaleRank No. #5
bayite DC 12V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
  • Simplified Design---Easy to set. Support °F display
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Warranty---1 year warranty for replacement or full refund without return.
  • Package contents: A DC 12V temperature controller , comes with a 3m(9.8ft) waterproof probe sensor (Measure range is -4 ~ 230°F), and a user manual.
Rank No. #6
Twidec/DC 12V Temperature Controller Programmable -50 to 110 ℃ (-58 to 230 °F) Red/Blue LED Display Monitor Heating/Cooling Thermostat Control Module with NTC 10K Waterproof Sensor Probe
  • Temperature measuring range:-50 to 110℃ (-58 to 230 ℉); Resolution: 0.1℃ at -9.9 to99.9, and 1℃ at other temperature intervals;refresh rate: 0.5 s
  • Opening size: 45mm*25mm/1.76"*1 ";Dual color LED display:Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time.which can be applied for cooling/ heating mode, you can test indoor or outdoor temperature
  • NTC 10K Which is waterproof, moisture-proof and anti-rust. Available for remote temperate measuring and controlling. It can control heating or cooling according to different needs
  • The electronic temperature control switch module has been tested for consistency and reliability, and its control accuracy is ±0.1 degrees Celsius with 0-110℃ high temperature protection
  • The thermostat can be widely applied in intelligent home and industrial equipment, fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems.
Rank No. #7
CNAODUN PID Temperature Controller Kit 100-240 VAC Voltage with 40DA Solid State Relay,K Type Thermocouple Probe and Heat Sink
  • ♥【One Way SSR output】3,4 port output to SSR,a 40da solid state relay is included in the package.The power supply voltage for this Pid temperature controller is 100-240VAC.
  • ♥【One Alarm Output】6,7 ports are alarm outputs, AC220V/DC30V 3A (Resistive load) ON/NC, also can be used to connect relay.
  • ♥【Supports 2 Wire Sensor Input】Support two-wire thermocouple input, K, E, J, N, W3-25, W5-26 type thermocouple input are available, the default setting is K type thermocouple input
  • ♥【℉ and ℃ Adjustable】Fahrenheit and Celsius adjustable, default is Fahrenheit, with PID function
  • ♥【Temperature Digital Display】PV is the current measured temperature, SV is the set temperature, both are displayed simultaneously.
Rank No. #8
Twidec/Display PID Temperature Controllers Thermostat Box 1000W 10A 110V Temperature Temp Control Box with Solid State Relay SSR 40DA Oven Thermostatic Control Box
  • Product name: Temperature Controller MV100-B10 + solid state module relay SSR-40DA, 3-32VDC/24-380VAC Temperature Controller Box;Special note: After the temperature controller is turned on, the default is degree Fahrenheit
  • Digital Display PID : Support reading with Centigrade or Fahrenheit unit (factory default to Fahrenheit unit); be able to display measured and Controller temperature ;Display Character: PV: 4 digital 9.9mm height Red LED Letters;SV: 4 digital 8mm height Green LED Letters
  • Total size:170mm x 155mm x 90mm/6.7"*5.9"*3.5"(L*W*H);Controller Front Panel Dimension: DIN 51mm(W)X51mm(L)/2"*2"
  • Power Supply Voltage: AC 85-265V 50/60Hz ;Input: K,factory default to K type ; Output: Solid state relay SSR ; Alarm mode: factory default to 1 way High deviation alarm(can choose)
  • Box Including:MV100 Controller;SSR 40DA solid state relay ;Rotary switch;Indicator light;Knob type safety tube;Wiring board;Temperature sensor
SaleRank No. #9
Universal PID Temperature Control Board Replacement for Pit Boss, Traeger, Z Grills and Asmoke Grill and Smoker by Meatender
  • Wide Compatiblity: The control panel can fit a wide range grill models of Traeger (bac236, bac365), Pit Boss, Z grills and Asmoke. See picture for specific model.
  • PID Controller: 3 version (300, 450, 700) specifically designed for grills of different cooking surface area, maintains temperatures to your desired set point.
  • Connection Parts Fault Detection and Alarm: Automatically monitors the fault of igniter, auger and fan. When the fault occurs, the corresponding icon displays, the screen flickers, and the controller beeps.
  • Cool Down Assistant: Reduce the probability of cases such as fuel pipe scorched, ash stacking in burn pot and hopper backfire.
  • Smoke Mode: 1 smoke option for Version 300 and 6 options for Version 450 and 700, adding smoky flavor for grilling food.
Rank No. #10
Replacement Digital Controller Board ,Universal Grill and Smoker PID Control Board/Thermostat for Pit Boss/Traeger/Zgrill Pellet Grill Smoker
  • 【WIDE COMPATIBILITY】: The control panel can fit a wide range grill models of Traeger , Pit Boss, Z grills and Asmoke. See picture for specific model.
  • 【PID Controller】: 3 versions (300, 450, 700) are specially designed for grills with different cooking areas, keeping the temperature at your desired set point.
  • 【Cool Down Assistant】: Reduce the probability of cases such as fuel pipe scorched, ash stacking in burn pot and hopper backfire. Smoke Mode: 1 smoke option for Version 300 and 6 options for Version 450 and 700, adding smoky flavor for grilling food.
  • 【Fault detection】: The control panel adopts a high-definition large screen, and the temperature is clearer. Automatically monitor the faults of the igniter and fan. When a fault occurs, the corresponding icon is displayed, the screen flashes, and the controller beeps. It is more convenient to use.
  • 【Package contents】: A control panel and Tabletop grill adapter,Contact us via Amazon Message if you need any support.
Rank No. #11
WiFi PID Temperature Control Controller, SSR, W/ Dual Alarm, 1/16 DIN Size, AW-SYL-2352
  • Best-selling PID controller with WIFI feature. iOS & Android App is provided.
  • PID control with fuzzy logic enhancement for the best stability control
  • 0.2% accuracy over the entire input range
  • Auto/manual control with bump less transfer
  • Dual alarm outputs with more than ten ways to activate
SaleRank No. #12
INKPET Reptile Thermostat Digital Temperature Controller Heating Cooling for Heat Mat Lamp Terrarium Heating Pad Under Tank Heater, 10A 1200W
  • Heating / Cooling Dual Modes: With heating/cooling dual mode. Temperature control range: 32.0℉~113℉. Measurement accuracy: ±2.0℉.
  • Safe & Reliable:Support high/low temperature alarm and it will beep when the temperature is detected to exceed a preset value.
  • 1200W high power output: With compressor delay function to protect the compressor by reducing the work load during restart.
  • Easy To Read: The indicator light allows you to see the status of the controller even in complete darkness; supports switching between Celsius and Fahrenheit, and supports hanging.
  • Suitable for regulating the temperatures of heat pads, heat lamps, under tank heaters, etc. Great addition for your hermit crab, bearded dragon, snake, gecko, tortoise, lizard.
SaleRank No. #13
CGELE PID Temperature Controller Kit Voltage AC 100~240V Comes with SSR 40DA Solid State Relay, K Type Thermocouple Sensor, and Black Heat Sink…
  • 【Alarm Output】With one alarm relay output: AC220V/DC30V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【Supports 3 Wires Sensors】3 wire or 2 wires sensor , like K(E,J,N,W3-25,W5-26) type thermocouple,PT100,Cu50 , are supported by this PID temperature controller
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Digital Display ℃/℉】It’s a digital PID controller but supports both Centigrade and Fahrenheit display
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
Rank No. #14
Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
Rank No. #15
Elitech Temperature Controller STC-1000 Non-WiFi 2-Stage Outlet Thermostat LCD Screen Heating and Cooling Mode for Reptile Aquarium Carboy Homebrew Seed with Temp Sensor 23-158°F 1100W 110V 10A
  • PLUG & PLAY: Its large LCD screen, simple 3-button, and pre-wired design making it easier to be used with plug and play.
  • HEATING & COOLING CONTROL: Be able to connect with cooling and heating device at the same time, auto swtich between heating and cooling.
  • WIDE TEMPERATURE CONTROL RANGE: -40~230°F/-40-110°C
  • MULTI-FUNCTIONAL: Its functions include setting high or low alarms, start delay, temperature calibration, ℃/℉ and etc.
  • SAFE & RELIABLE: Comply with CE, FCC standard and adopt fireproof ABS case, UL94 V-0 for safety. 24/7 US Technician Support via Email and Phone.
Rank No. #16
Inkbird ITC-106VH PID Temperature Thermostat Controllers Fahrenheit and Centigrade AC 100 to 240V for Sous Vide Home Brewing Oven Incubator
  • 🎉🎉Support reading with Centigrade or Fahrenheit unit.It is more suitable for setups with water cycle. If the device does not have water cycle, the ITC-100 series is recommended.
  • 🎉🎉Dual display window, be able to display measured temperature and set temperature at the same time
  • 🎉🎉Simplify operational processes and you don't need to operate more steps if you want to set the definite value
  • 🎉🎉High accuracy of displaying and controlling. Manual and Auto turning are available
  • 🎉🎉Mounting Method: Flush mounting and screw terminals
Rank No. #17
YXQ REX-C100 Temperature Thermostat Controllers Digital Intelligent PID LED, 100 - 240VAC, K Sensor, 40A Solid State Relay, Heat Sink (REX-C100 + K + 40A SSR+Heat Sink)
  • Professional self-tuning PID technology, compared with the traditional PID control, it has a rapid temperature control, small overshoot and high precision.
  • 0-400℃ M6 Thread 1M Lenght K-Type Thermocouple Temperature Sensing For Temperature Controller
  • 40A SSR SOLID STATE RELAY 24-480VAC Output 3-32VDC control for temperature controller
  • Heat sink Base for heat dissipation(M4 screws)
  • Self-tuning control; output, alarm and self-tuning can be indicated by LED. Process Value (PV), Setting value (SV). PIN control (including ON/OFF, step-type PID and continuous PID. Environment with no corrosive gas 30~85% RH. Widely applied to electric power, chemical industry, injection molding, food, incubator, oven and many other equipment.
Rank No. #18
Inkbird AC 100 to 240V ITC-100VH Digital PID Thermostat Temperature Controller 25DA SSR K Thermocouple White Heat Sink
  • PID and ON/OFF Control Mode with high standard self-adjust function
  • Multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
  • Self-adjusting function and intelligent control of the instrument to ensure the long-term stability.It is more suitable for setups without water cycle, such as ovens.
  • Accuracy of displaying and controlling 0.1ºC
  • Character: PV: 4 digital 9.9mm height Red LED Letters. SV: 4 digital 8mm height Green LED Letters
Rank No. #19
Fafeicy REX-C100 Digital LED PID Temperature Controller Thermostat Kit AC 110V-240V, Thermostat
  • Practicality: It's an useful temperature controller for controlling temperature intelligently and it can help the operator get good effect by simple operation.
  • Specialty: This multi-functional controller has special microprocessor switching power supply and SMT.
  • Professional Kit: This Temperature Controller is adopted industrial-grade professional self-tuning PID technology, compared with the traditional PID control, it has a rapid temperature control, fast response, small overshoot and high precision.
  • The probe has high sensitivity to ensure accurate measurement
  • Wide application: It can widely applied to electric power, chemical industry, injection molding, food, incubator, oven and many other equipment.
Rank No. #20
Electronic Thermostat Controller, DROK DC 6-30V 24V Digital Temperature Control Board -50 to +110 Degree Celsius High Accuracy LCD Digital Micro Temp Control Switch Module with Waterproof Sensor Probe
  • DROK electronic thermostat controller power supply is DC 6-30V or 5V micro USB; control load current is 10A (Max); test temperature is -50~110℃; sensor length is 0.5 meter.
  • High current: Our digital temperature control board adopts high density PC board installation technology, the switch capacity can be up to 10A in spite of the small size.
  • LCD display: Designed with bright LCD display, people can check the temperature clearly from any angle.
  • User-friendly functions: The thermostat module has the function of real-time temperature reporting, temperature correction function, high-temperature alarm, emergency stop function and support UART Set, which make the module reliable and easy to use.
  • Applications: With waterproof temperature sensor probe, it can be widely used for domestic appliance, office machine, audio, equipment, automobile, etc. (Remote control TV receiver, monitor display, Audio,Raspberry Pi equipment high rushing current use application)

Last update on 2023-12-27 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Jld612 Temperature Controller?

Do you get stressed out thinking about shopping for a great Jld612 Temperature Controller? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Jld612 Temperature Controller, which is why we have assembled a comprehensive list of the greatest Jld612 Temperature Controller available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Jld612 Temperature Controller that you consider buying. Your questions might include the following:

  • Is it worth buying an Jld612 Temperature Controller?
  • What benefits are there with buying an Jld612 Temperature Controller?
  • What factors deserve consideration when shopping for an effective Jld612 Temperature Controller?
  • Why is it crucial to invest in any Jld612 Temperature Controller, much less the best one?
  • Which Jld612 Temperature Controller are good in the current market?
  • Where can you find information like this about Jld612 Temperature Controller?

We’re convinced that you likely have far more questions than just these regarding Jld612 Temperature Controller, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Jld612 Temperature Controller, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Jld612 Temperature Controller. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Jld612 Temperature Controller buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Jld612 Temperature Controller currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Jld612 Temperature Controller has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Jld612 Temperature Controller?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Jld612 Temperature Controller.
  5. Customer Ratings: Number ratings grade Jld612 Temperature Controller objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Jld612 Temperature Controller.
  7. Product Quality: You don’t always get what you pay for with an Jld612 Temperature Controller, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Jld612 Temperature Controller is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Jld612 Temperature Controller information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Jld612 Temperature Controller is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: