Contents

The Best Arduino Camera of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Arduino Camera of 2023. Check our ranking below.

2,683 Reviews Scanned

Rank No. #1

HiLetgo 2pcs OV7670 640x480 0.3Mega 300KP VGA CMOS Camera Module I2C for Arduino ARM FPGA

Resolution 640x480 VGA
IO voltage 2.5V to 3.0V (internal LDO power supply to the core 1.8V)
Power operation 60mW/15fps VGAYUV
Automatic influence control functions include: automatic exposure control, automatic gain control, automatic white balance, automatic elimination of light streaks, automatic black level calibration, image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
RawRGB, RGB (GRB4:2:2, RGB565/555/444), YUV(4:2:2) and YCbCr(4:2:2) output formats

Rank No. #2

Arducam Mini Module Camera Shield with OV2640 2 Megapixels Lens Compatible with Arduino UNO Mega2560 Board and Raspberry Pi Pico

Compatible with Arduino, Raspberry Pi Pico, MCU, Raspberry Pi, ARM, DSP, FPGA platforms
2 megapixels image sensor OV2640, build-in 650nm IR block filter, visible light only
M12 mount or CS mount lens holder with changeable lens options
I2C interface for the sensor configuration，SPI interface for camera commands and data stream

Rank No. #3

Aokin ESP32-CAM Camera Module, ESP32 Development Board WiFi and Bluetooth with OV2640 2MP Camera for Arduino, 1 Pcs

The ESP32-CAM camera module is based on an ESP32 chip with an OV2640 2MP camera, built-in flash, also supports OV7670 cameras. Small and compact design, can fit on a solderless breadboard, saves space for your project.
Specifications: The board uses high-performance dual-core 32-bit LX6 CPU, can be used as an application processor, integrates WiFi, traditional Bluetooth, and low power BLE. its main frequency adjustment ranges from 80MHz to 240MHz, adopts 7-stage pipeline architecture, on-chip sensor, Hall sensor, temperature sensor, and so on.
Features: the board fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, have 9 GPIO ports, built-in 520 KB SRAM plus 4MB PSRAM, support UART/SPI/I2C/PWM and other interfaces, STA/AP/STA+AP working mode, maximum 4G TF card, image WiFI upload, multiple sleep modes, secondary development, etc.
Use: ESP32-CAM can be widely used in various IoT applications, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
If you have any questions about our ESP32-CAM development board, please contact us by Amazon message, we will do our best for you.

Rank No. #4

ACEIRMC 2pcs ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP for Arduino (2pcs)

The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core
ESP32-CAM WiFi Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP for Arduino, Support Image WiFi Upload and TF Card
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC; Support OV2640 and OV7670 cameras, built-in flash; Support image WiFi upload and Support TF card
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard; Wi-Fi: 802.11 b/g/n/e/i; Support Interface: UART, SPI, I2C, PWM; Support TF Card: Maximum support 4G
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module

Rank No. #5

Arducam 1080P Day & Night Vision USB Camera for Computer, 2MP Automatic IR-Cut Switching All-Day Image USB2.0 Webcam Board with IR LEDs for Windows, Linux, Android and Mac OS

Day/Night Vision: IR-CUT Filter switched in and out automatically based on light condition (only visible light during the daylight and infrared sensitivity during the night with 850 IR LEDs on)
HD Resolution: This camera adopts 2MP OV2710 sensor for sharp image, Max. resolution: 1920*1080
High Frame Rates: MJPG 30fps@1080P; YUY2 30fps@640x 480; High speed USB 2.0 interface.
Plug&Play: UVC-compliant, just connect the camera to PC, laptop, Android device or Raspberry Pi with the USB cable without extra drivers to be installed.
Applications: this mini 38mmx38mm camera board can be installed in most hidden and narrow position for a home surveillance system, wildlife photography, dashcam, baby camera, etc.

Rank No. #6

Arducam Motorized Focus Pi Camera, Autofocus for Raspberry Pi Camera Module, Motorized Lens, Software Precise Manual Focus, OV5647 5MP 1080P

SEE CLOSER: Software-controllable moveable Lens. Shoot objects in millimeter level and in the distance on the same camera, remotely controlled without lens adjustment tool, closer and easier than the fixed focus (1 m to infinity) official Raspberry Pi Camera Module V2
SEE SMARTER: Thanks to the motorized lens and the Autofocus python scripts powered by OpenCV, your focus is now the camera’s focus. Support the autofocus features on Raspberry Pi 4/3B+/3 and more.
SEE PRECISELY: Precise manual focus control with UP and DOWN keys on the keyboard to handcraft your pixel accuracy and optimal clarity on a Pi camera for machine vision, object recognition and more
SEE NATURALLY: 5MP OV5647 sensor camera module, same form factor and same mounting holes for your drop-in replacements, works natively compatible with the Raspberry Pi. Support OS like Raspbian, MotionEye, Kali, Ubuntu, and More
Acrylic camera case and 15cm flex ribbon camera cable for Model A&B series included. NOTE: We are now offer two versions on Amazon. The new board is printed Rev.A, which has the same functions but comes with some streamlining of circuit design.

Rank No. #7

MLX90640 IR Array Thermal Imaging Camera Module 32×24 Pixels 55° Field of View Camera with I2C Interface for Raspberry Pi/Arduino(ESP32)/STM32

Communicating via I2C interface, configurable to fast mode (up to 1MHz data rate)
Adopts MLX90640 far-infrared thermal sensor array, 32×24 pixels
Noise Equivalent Temperature Difference (NETD) 0.1K RMS @1Hz refresh rate
Onboard voltage translator, compatible with 3.3V/5V operating voltage
Comes with development resources and manual (examples for Raspberry Pi/Arduino(ESP32)/STM32)

Rank No. #8

Arducam Mini Module Camera Shield 5MP Plus OV5642 Camera Module, Compatible with Arduino UNO Mega2560 Board

Arducam Mini Module Camera Shield 5MP Plus OV5642 Camera Module is a general purpose high definition 5MP SPI camera, which reduce the complexity of the camera control interface
It integrates 5MP CMOS image sensor OV5642, and provides miniature size, as well as the easy to use hardware interface and open source code library
The Arducam Mini is compatible with Arduino, Raspberry Pi, Raspberry Pi Pico,ESP8266, Maple, Chipkit, Beaglebone black, as long as they have SPI and I2C interface
Support JPEG compression mode, single and multiple shoot mode, short movie recording, one time capture multiple read operation, burst read operation, low power mode and etc.
It can be used in IoT, Robot, Wildlife, HDR and Other battery-powered products or scientific image processing applications

Rank No. #9

Arducam 5MP Camera for Raspberry Pi, 1080P HD OV5647 Camera Module V1 for Pi 4, Raspberry Pi 3, 3B+, and Other A/B Series

High-Definition video camera for Raspberry Pi Model A or B, B+, model 2, Raspberry Pi 3,3 B+, Pi 4(NOT for Pi Zero)
5MPixel sensor with Omnivision OV5647 sensor in a fixed-focus lens. Software auto focus lens: B07SN8GYGD
Integral IR filter
Still picture resolution: 2592 x 1944; Max video resolution: 1080p
Check ASIN: B07RWCGX5K for OV5647 with acrylic case. Other optional accessories: ABS case (B09TNG4V55); Mini tripod case kit (B09TKYXZFG).

Rank No. #10

Arducam 1080P Low Light WDR Ultra Wide Angle USB Camera Module for Computer, 2MP CMOS IMX291 160 Degree Fisheye Mini UVC USB2.0 Webcam Board with Microphone, 3.3ft Cable for Windows Linux Mac OS

HD Resolution and Low Light: This camera adopts the 2MP 1/2.8” IMX291 Color COMS sensor with an 80DB wide dynamic range, can capture the minimum illumination 0.001Lux.
Ultra Wide Angle: High quality 160 degree super wide view angle (diagonal) M12 lens with IR filter.
Capture Video with Audio: High frame rates, H.264 30fps@1920x1080; MJPG 30fps@1920x1080; YUY2 30fps@640x 480; Audio, single microphone.
Plug&Play: UVC-compliant, support Windows XP/7/8/10, Linux, and Mac OS, just connect the camera to PC, laptop or Raspberry Pi with the USB cable without extra drivers to be installed.
Applications: this tiny camera board can be installed in the most hidden and narrow position for a home video surveillance system, day&night low light vision security camera system, dashcam or other machine vision application.

Rank No. #11

HUSKYLENS Smart AI Machine Vision Sensor - Object Tracking Camera for Arduino, Raspberry Pi & LattePanda

HuskyLens is an easy-to-use AI machine vision sensor. It is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, color recognition, and tag(QR code) recognition.
HuskyLens is pretty easy-to-use.Through the UART / I2C port, HuskyLens can connect popular main control boards .You can change various algorithms by pressing the function button. Click the learning button, HuskyLens starts learning new things. After that, HuskyLens is able to recognize them.
Additionally, HuskyLens carries a 2.0 inch IPS screen. So you don’t need to use a PC in the parameters tuning. Enjoy the convenience it brings, what you see is what you get!
HuskyLens is designed to be smart. It has the built-in machine learning technology that enables HuskyLens to recognize faces and objects. Moreover, by long pressing the learning button, HuskyLens can continually learn new things even from different angles and in various ranges. The more it learns, the more accurate it is.

Rank No. #12

Arducam 8MP Autofocus USB Camera, IMX179 USB 2.0 Lightburn Camera with Microphone, Ultra HD Embedded USB Camera for PC and Raspberry Pi, Compatible with Linux, Windows, and Mac OS

Ultra HD 8MP USB camera – Autofocus lens with 8MP CMOS IMX179 (3264*2448@15fps), high-Definition resolution webcam is able to ensure your videos are always sharp and crystal clear. Capture most exciting details at every 30/15fps, FoV: 58°(H)
1/3.2” CMOS IMX179 Lightburn Camera: High quality and low color reproduction deviation produce sharp images and more details. Picture format MJPEG or YUY2 optional, cameras with high resolution can be used in any video system for personal or industrial.
Mini-sized: Small and compact size lightburn camera for laser engraver, and ideal for Video systems, 3D scanners, VR cameras, electronic microscopes, and medical machines.
Plug and Play: OTG supported, just plug the USB cable into your PC’s USB port, and running the software can capture the high-level video and continuous recording, no drive needed.
Wide Compatibility: USB webcam widely works with WinXP/Vista/Windows 7/8, Windows 10 Linux with UVC. Webcam for MAC, PC, desktop computer, laptop USB.

SaleRank No. #13

Mini Pan/Tilt Camera Platform Anti-Vibration Camera Mount w/ 2 Servos Aircraft FPV

This is a small Camera Platform. Including 2 SG90 servos.
Camera is not included.
Anti-Vibration Camera Mount for Aircraft FPV.
They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion.
About us, Professional factory, welcome to our store for more choices with best price. What we pursue is your satisfaction of our service, not just for our goods. For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. We will reply you about any question you ask within 24 hours.

Rank No. #14

AITRIP 6Pcs ESP32-CAM Wireless WiFi+Bluetooth Development Board with Camera Module OV2640 Compatible with Arduino IDE Arduino Raspberry Pi

Ultra-low power consumption: low-power dual-core 32-bit CPU suitable for application processors, the main frequency adjustment range is 80MHz to 240MHz, on-chip sensors, Hall sensors, temperature sensors, etc.
You will get 6 Pieces ESP32 CAM Development Board 2.4GHz WiFi + BT/BLE Module with OV2640 Camera Module
ESP32 cam using low-power dual-core 32-bit CPU, can be used as an application processor, main frequency up to 240MHz, computing power up to 600 DMIPS, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
ESP-32CAM can be widely used in various IoT applications. Suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, etc.

Rank No. #15

FREENOVE ESP32-WROVER CAM Board (Compatible with Arduino IDE), Onboard Camera Wireless, Python C Code, Detailed Tutorial, Example Projects

ESP32-WROVER -> A powerful and small controller with onboard camera and wireless.
2 tutorials with MicroPython and C code -> The download link can be found on the product box. (No paper tutorial.)
Example projects -> The tutorial will show you several typical projects with code and explanations.
Easy to use -> Just connect it to your computer (installed IDE and driver) with a USB cable to program it.
Get support -> Our technical support team is always ready to answer your questions.

Rank No. #16

FREENOVE ESP32-S3-WROOM CAM Board (Compatible with Arduino IDE), Onboard Camera Wireless, Python C Code, Detailed Tutorial, Example Projects

ESP32-S3-WROOM -> A powerful and small controller with onboard camera and wireless.
1GB Memory Card -> Can be inserted into the ESP32-S3 board to store files. (Included in this kit.)
2 tutorials with MicroPython and C code -> The download link can be found on the product box. (No paper tutorial.)
Example projects -> The tutorial will show you several typical projects with code and explanations.
Easy to use -> Just connect it to your computer (installed IDE and driver) with a USB cable to program it.

Rank No. #17

Comimark 2Pcs VGA OV7670 CMOS Camera Module Lens CMOS 640X480 SCCB I2C Interface for Arduino

OV7670 image sensor, providing single-chip VGA camera and image processor for all functions. Through the SCCB bus control, outputFull frame, sub-sampling, taking a variety of windows, etc. affect the data resolution
Products VGA images up to 30 frames / sec. Users can fully control the image quality, data formats and transmission. All image processing functions including gamma curve process, white balance, saturation, hue and so on through the SCCB interface programming.
OmmiVision image sensor applications unique sensor technology, by reducing or eliminating optical or electronic defects such as fixed pattern noise, prop tail, floating powder, etc., to improve image quality, get a clear and stable color image.
Package Includes: 2x ov7670 Image sensor mage transducer module(If the number of products received is incorrect, please contact us . we will refund or give you a replacement)
We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.

Rank No. #18

Hosyond 2Pcs ESP32-CAM Wireless WiFi+Bluetooth Development Board with Camera Module OV2640 Compatible with Arduino

ESP32CAM is based on ESP32 chip and OV2640, use low-power dual-core 32-bit CPU, which can be used as an application processor.
The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS.
Built-in 520 KB SRAM , external 8MB PSRAM ,support UART/SPI/I2C/PWM/ADC/DAC and other interfaces;Support picture wireless upload, TF card, multiple sleep modes, STA/AP/STA+AP working mode, secondary development.
It is an ideal solution for IoT applications. The ESP-32CAM comes in a DIP package that plugs directly into the backplane for rapid production.
ESP-32CAM can be widely used in various IoT applications. Suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, etc.

Rank No. #19

AITRIP 3PCS Heart Rate Sensor Module MAX30102 Puls Detection Blood Oxygen Concentration for Arduino STM32 (3PCS Black MAX30102)

3pcs Heart-Rate Sensor Module , MAX30102 Blood Oxygen Sensor, Compatible with Arduino STM32
The standard I2C compatible communication interface can transmit the collected data Compatible with Arduino, KL25Z and other microcontrollers for heart rate and blood oxygen calculation.
MAX30102 is an integrated module of heart rate monitor biosensor. It integrates a red LED with an infrared LED, a photoelectric detector, an optical device, and a low noise electronic circuit with ambient light suppression;MAX30102 uses a 1.8V power supply and an independent 5.0V power supply for internal LED
it can be used to a wearable device for heart rate and blood oxygen collection, worn on fingers, ear lobes, wrists and other places.

Rank No. #20

AITRIP 2 Pieces ESP32-CAM WiFi Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module Compatible with Arduino IDE Arduino Raspberry Pi

ESP32-CAM WiFi Bluetooth Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module
A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz.
ESP32 CAM supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC, ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
Wide range of use: ESP-32CAM can be widely applied in various IoT applications; It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless, wireless positioning system signals and other IoT applications; It is an proper solution for IoT applications
compliant with WiFi 802.11b/g/n/e/i and 4.2 standards, it can be applied as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices

Last update on 2023-08-18 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Arduino Camera?

Do you get stressed out thinking about shopping for a great Arduino Camera? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Arduino Camera, which is why we have assembled a comprehensive list of the greatest Arduino Camera available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Arduino Camera that you consider buying. Your questions might include the following:

Is it worth buying an Arduino Camera?
What benefits are there with buying an Arduino Camera?
What factors deserve consideration when shopping for an effective Arduino Camera?
Why is it crucial to invest in any Arduino Camera, much less the best one?
Which Arduino Camera are good in the current market?
Where can you find information like this about Arduino Camera?

We’re convinced that you likely have far more questions than just these regarding Arduino Camera, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Arduino Camera, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Arduino Camera. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Arduino Camera buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Arduino Camera currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Arduino Camera has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Arduino Camera?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Arduino Camera.
Customer Ratings: Number ratings grade Arduino Camera objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Arduino Camera.
Product Quality: You don’t always get what you pay for with an Arduino Camera, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Arduino Camera is should be an indication of how long it will work out for you.

We always remember that maintaining Arduino Camera information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Arduino Camera is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is the best camera for Arduino?

A: Best Arduino Camera Module (Shield) 1. Pixy (CMUcam5) Object Tracking Camera with Smart Vision Sensor for Raspberry Pi , Arduino, and BeagleBone 2. Arducam Mini Arduino Camera Shield with OV2640 2 MP Lens Compatible With UNO Mega2560 Board 3. SainSmart Infrared Night Vision Camera Module for Arduino and Raspberry Pi

Q: Is it possible to use an USB camera with Arduino?

A: No, not as it stands. Those wires are supposed to connect to a USB port. Furthermore the camera will behave as a USB slave device. The arduino mega will also behave as a USB slave device.

Q: What is a camera module?

A: A camera module is an image sensor integrated with a lens, control electronics, and an interface like CSI , Ethernet or plain raw low-voltage differential signaling . See also. Elphel – multi-sensor camera based on FPGA and Ethernet interface.