Contents

The Best Arduino Stepper Motor Kit of 2023 – Reviewed and Top Rated

2,749 Reviews Scanned

Rank No. #1

Twotrees 3D Printer CNC Controller Kit with for ArduinoIDE, GRBL CNC Shield Board A4988 Stepper Motor Driver Nema 17 Stepper Motor

〖3D Printer CNC Kit〗- This is a professional 3D printer DIY kit, with many types of modules or components you need. It is a great assortment set for starters and professionals.
〖Latest CNC Shield Expansion Board V3.0〗- The CNC Shield Board is an updated version of version 3.0, which is suitable for CH340G Shield 3.0 version compatible with ArduinoIDE, GRBL 0.9.
〖Nema 17 Stepper Motor〗- Stepper motor high torque (42Ncm(60oz.in) )，low self-inductance reactance, responsive and can avoid system error.Low loss stators have better high speed performance.Stepper Motors can be connected with 4 pin molex connectors or soldered in place
〖Stepper Motor Driver with Heat Sinks〗-Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) .Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

Rank No. #2

3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black

★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
★ Good after-sales service. We'll respond within 24 hours for any questions.

Rank No. #3

Kuman Professional CNC Kit for arduino, GRBL CNC Shield +Kuman Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver with Heat Sink + Nema 17 Stepper Motor

Latest CH340G CNC Shield expansion board Version 3. 0 for Arduino
Kuman Board, MCU: ATmega328, USB interface: ATmega16U2 with 1. 5m USB Cable
4pcs DRV8825 Stepper Motor Driver with heat sinks
3pcs NEMA-17 Stepper Motor 84 oz. in (59 Ncm) 47mm Body 1. 8 degree with mounting Bracket Kit DIY CNC Robot with 3pcs Mounting Bracket and 12 pcs M3 Screws
3pcs End stop Mechanical Limit Switches for RAMPS 1. 4 with 3Pin 70cm Cable

Rank No. #4

STEPPERONLINE Nema 17 Stepper Motor Bipolar 1.5A 42Ncm 42x42x38mm 1.8deg 4 Wires with 1m Cable and Connector (1 Pack)

Nema 17 Stepper Motor with 42Ncm holding troque
Bipolar stepper motor ,dimension 42*42*38mm, 2 phase, 4 leads
Step angle 1.8deg, 200 step/revolution
Rated Current/phase 1.5A & Phase Resistance 2.3ohms
Low noise high speed 3d printer stepper motor, build with 1m Cable and Connector

Rank No. #5

Professional CNC Kit for arduino, kuman GRBL CNC Shield +UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver with Heat Sink + Nema 17 Stepper Motor

Rank No. #6

RATTMMOTOR 3D Printer CNC Controller Kit Compatible with Arduino IDE, Nema17 Stepper Motor+UNO R3 Improvement Borad+CNC GRBL Shield Board V3 Expansion Board+DRV8825 Drivers+Mechanical Switches

【Nema17 Stepper Motor】Step angle: 1.8deg; Rated current: 1.7A; Holding torque: 0.45Nm (64 oz.in) ; Size: 40mm; Phase: 2; 1.8 ° ± 5% step angle (200 steps / rotation)
【UNO R3 Improvement Borad】 UNO is a Simple I/O platform based on open source code, and has a Processing/Wiring development environment similar to Java and C language, which is easy to understand, allowing you to quickly use UNC to make interesting things
【CNC Shield Board V3 Expansion Board】This expansion board can be used as a drive expansion board for engraving machines, 3D printers, etc.
【DRV8825 Stepper Motor Driver】Six different stepping modes: full, half, 1/4, 1/8, 1/16, 1/32; The adjustable potentiometer can adjust the maximum current output, so as to obtain a higher step rate.
【Mechanical Switches with 3-pin Cable】Under normal circumstances, the system needs to be equipped with at least 3 mechanical switches;easy to install, more common styles.

Rank No. #7

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board

The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable.
Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in); Stepper Motor diameter: 1.06(in); Stepper Motor lines: 9.45(in).
A, B, C, D four-phase LED indicates the status of the stepper motor work.
5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking.
Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift).

Rank No. #8

HiLetgo TB6612 Mosfet for Arduino Motor Shield Standard IIC I2C TB6612FNG Stepper Motor PCA9685 PWM Servo Driver Shield V2 Robot PWM Uno Mega R3 Replace L293D

H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak)
Chip: TB6612FNG motor driver chip
Completely stackable design: 5 address-select pins means up to 32 stackable shields
Characteristic: Arduino interface is fully compatible expansion
Feature: Motors automatically disabled on power-up

Rank No. #9

(Pack of 4pcs) NEMA17 Stepper Motor High Torque Bipolar DC Step Motor Kit by MOTOU

BROAD USE: Widely used in various fields, such as 3D printers, stage lighting, laser engraving, textile machinery, medical equipment, automation equipment, etc.

SaleRank No. #10

Complete Ultimate STEM Electronic Projects Starter Kit for Arduino with Mega2560, LCD1602, Servo, Stepper Motor, Sensors, Breadboard, Jumper Wire, Resistor, Capacitor, Transistor and Tutorial

This is an upgrade complete Arduino starter kit designed for beginners and electronic hobbyists.
With more than 33 projects, it is esay and convenient for you to learn Arduino and programming. If you need the guide of the projects, just email us after you getting the mega2560 starter kit..
The starter kit will make a great gift for any to-be engineers, or anyone looking to get a jump start in the world of microcontrollers and programming. Hundreds of tutorials and guides can be found online and the range of projects that can be created with an Arduino is vast
This kit comes with everything that the average beginner Arduino project requires, plus more, 50 kinds of different electronic components, more than 180 components, such as Arduino Mega2560, 1602 LCD display are included. It has enough variety to learn most of what can be done with the arduino and electronics in general
The kit is a great help for you learning electronics! Lots of little bits to start doing Arduino things

Rank No. #11

3D Printer Controller Kit RepRap, RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit

2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino shield for easy service, part replacement, upgrade-ability and expansion. for Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)

Rank No. #12

DAOKI 3D Expansion Board 42 Stepper Motor Driver DRV8825 A4988 3D Printer Control Shield Module for Arduino UNO R3 Ramps1.4 DIY Kit

On-board DIP switch, you can easily adjust the drive segments.
Terminal power connector for easy connection drive power.
Compatible with 12 / 24V drive scheme.
Suitable for 42 stepper motor drive, 3D printers and DIY.
Applicable for A4988, DRV8825 module, reasonable design, easy for installation.

Rank No. #13

SYUAB 6 PCS 28BYJ-48 ULN2003 5V Stepper Motor with ULN2003 Drive Boards Blue for DIY Kit Arduino PI PIC Raspberry Pi

5V Stepper Motor Driver Blue Board Module,ULN2003 motor driver chip; the stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement
On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct
5V power supply.4-way signal indicator
Chip all the pins already leads for easy connection to use
Stepper Motor diameter: 1.06 ; Stepper Motor lines: 9.45; Voltage:5V. Step angle: 5.625 x 1 / 64

Rank No. #14

CNCTOPBAOS 4 Axis Nema23 Stepper Motor USB Mach3 CNC Kit,270oz-in 76mm 3A,USB Controller Board Motion Control Card,TB6600 Driver 4.5A 24V for CNC Router Milling Engraving Machine

♞【23HS8430 Nema23 Stepper Motor】Nema23 57 type;Step Angle: 1.8°; Current: 3.0A; Holding torque: 180N.cm/18kg-cm 270 oz-in; Shaft : single shaft,8mm diameter; Wiring:A+ : Red; A- : Green; B+ : Yellow; B- : Blue
♞【Driver】TB6600 driver Voltage: DC 10V-45V; Current: rated maximum output reaches: ±4.5A ; Subdivision: full step, half step, 1/4 step, 1/8 step, 1/16 step, maximum 16 subdivisions.
♞【4 Axis USB Mach3 Control Board】USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface. This control board does not require any drivers to be installed. As long as Mach3 can run, the control card can be used; Support computer system:Windows 2000/ XP / Windows 7/8.
♞【350W 24V DC Switching Power Supply】AC input voltage range: 110V-120V AC or 220V-240V AC; selected by switch to choose input voltage.
♞【Functions of the Control Board】It supports 4-axis linkage control at most; Maximum step-pulse frequency is 100KHz; Support probe tool; Support e-stop input; Support for limit switches; Support for electronic handwheel; Support spindle control(PWM and relay mode)

Rank No. #15

DAOKI CNC Shield V3.0 Expansion Board Kit with Board for Arduino, 4PCS DRV8825 Stepper Motor Driver and Heatsink, 10PCS Jumper Cap, USB Cable for Engraving Machine

Latest CNC Shield Version 3.0 for Arduino
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
Board for Arduino: Operating Voltage: 5V; Digital I/O Pins: 14 (of which 6 provide PWM output)
DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step);Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)
Package Content:1 x CNC shield V3.0 Board, 4 x DRV8825 Stepper Motor Driver, 4 x Heatsink, 1 x Board for Arduino, 1 x USB cable, 1 x DC Power Cable, 10 x Jumper Cap

Rank No. #16

2pcs Aluminum 5mm Bore 2GT Pulley 60 Tooth + 2pcs GT2 20T Timing Belt Synchronous Wheel +2pcs 200mm Closed Loop Rubber Belt for 6mm Width Belt 3D Printer CNC Machine

This kit includes 2pcs 60Tooth 2GT timing pulleys, 2pcs 20T 2GT pulleys and 2pcs 200mm close belt loop, 1pc wrentch
Both Bore size is 5mm; Used for 6mm width 2GT timing belt
Material: Aluminum, rubber
Widely used for transmission machines like 3D Printer, CNC machines, Drilling machines and so on

Rank No. #17

HiLetgo 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board for Arduino PI PIC Raspberry Pi

HiLetgo Stepper Motor+ Driver Board
Stepping angle: 5.625 X 1/64
Diameter: 28mm
Voltage: 5V
Speed down stepping motor

Rank No. #18

Adafruit Motor/Stepper/Servo Shield for Arduino v2.3 Kit

New version 2.3!
Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.
As of 3/21/2014 we are shipping motor shields with the terminal blocks, and power jumper pre-soldered on. You'll still need to do a little soldering to put on the shield-headers (or stacking headers) but it should be even easier and faster to get started!

Rank No. #19

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

Stepper motor with a standard interface.
A, B, C, D four-phase LED indicates the status of the stepper motor work.
Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)
5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking
Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift)

Rank No. #20

Eiechip® CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver 3D Printer Interface & Driver Modules

3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module.
The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers.
It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors.
Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors.
This shield can make quick work for managing stepper motors in your project.

Last update on 2023-08-05 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Arduino Stepper Motor Kit?

Do you get stressed out thinking about shopping for a great Arduino Stepper Motor Kit? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Arduino Stepper Motor Kit, which is why we have assembled a comprehensive list of the greatest Arduino Stepper Motor Kit available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Arduino Stepper Motor Kit that you consider buying. Your questions might include the following:

Is it worth buying an Arduino Stepper Motor Kit?
What benefits are there with buying an Arduino Stepper Motor Kit?
What factors deserve consideration when shopping for an effective Arduino Stepper Motor Kit?
Why is it crucial to invest in any Arduino Stepper Motor Kit, much less the best one?
Which Arduino Stepper Motor Kit are good in the current market?
Where can you find information like this about Arduino Stepper Motor Kit?

We’re convinced that you likely have far more questions than just these regarding Arduino Stepper Motor Kit, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Arduino Stepper Motor Kit, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Arduino Stepper Motor Kit. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Arduino Stepper Motor Kit buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Arduino Stepper Motor Kit currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Arduino Stepper Motor Kit has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Arduino Stepper Motor Kit?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Arduino Stepper Motor Kit.
Customer Ratings: Number ratings grade Arduino Stepper Motor Kit objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Arduino Stepper Motor Kit.
Product Quality: You don’t always get what you pay for with an Arduino Stepper Motor Kit, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Arduino Stepper Motor Kit is should be an indication of how long it will work out for you.

We always remember that maintaining Arduino Stepper Motor Kit information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Arduino Stepper Motor Kit is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is the purpose of a stepper motor?

A: A stepper motor is an electrical device which divides the full rotation of the motor into individual parts called steps. Generally, these motors are brushless in order to facilitate a synchronous rotation and operate without the input of an external source on the gear itself.

Q: What are Arduino Motors?

A: Arduino For Dummies. The DC motor in your Arduino kit is the most basic of electric motors and is used in all types of hobby electronics. When current is passed through, it spins continuously in one direction until the current stops.

Q: What is a stepper actuator?

A: A stepper actuator is a mechanical device which produces force, as well as motion along a straight path. A stepper actuator uses the core principles of a stepper motor, with some slight modifications. With the stepper actuator, the shaft of a normal stepper motor is replaced with a precision lead screw,…