Skip to content

Contents

The Best Comet 94C Torque Converter of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Comet 94C Torque Converter of 2023. Check our ranking below.

2,035 Reviews Scanned

SaleRank No. #1
Vevor 212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40 or 41 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter
  • FOR 212CC 2HP-7HP GO KART TORQUE CONVERTER: This go-kart torque converter clutch kit is made of high-quality iron and aluminum materials, lightweight, sturdy and durable; it can reduce the engine load and get more power..Fit Type: Vehicle Specific
  • 30 SERIES GO KART CLUTCH KIT: This kart torque converter has a 3/4" and a 5/8" drive clutch, suitable for all engines with 3/4 "straight crankshaft.The 3/4" drive clutch contains a 10 tooth sprocket for # 40/41 chains.The Belt length: 70.5cm / 27.76", Outside circumference: 27"(68.8cm / 27"), Width is 3/4".(1.9cm / 0.75"). Center to Center of driver and driven: 6.7"(17cm / 6.7").
  • UNIT REPLACES: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts.
  • COMPLETE ACCESSORIES: The torque converter clutch includes: 1x 3/4" drive clutch; 1x 5/8" drive clutch; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; full mounting hardware. Fully equipped, worry-free installation.
Rank No. #2
BATONECO 40 Series 1" Bore Go Kart CVT Torque Converter Driver Clutch Replaces Comet 40/44 Pulley 203015
  • 1" Shaft Bore,1/4" Keyway,8 - 16 HP engines
  • Replaces OEM Part Numbers: 209133A, 209133, 2432, 203015A, 203015
  • Replaces COMET 40/44 Series Torq-A-Verter models and works with 8-16hp engines within the 1600-3300 RPM range.
  • This 40/44 Series is heavily used in three wheelers, ATV's, LTV's , and Go karts
  • Compatible with most small engines with horizontal shaft.
Rank No. #3
30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4" Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589
  • 【30 Series Torque Converter and Go Kart Drive Belt】 :New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4" Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589.
  • 【Torque Converter】:This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series.
  • 【Wide Use--torque converter 3/4】: Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.
  • 【Go Kart Drive Belt】: 30 Series Go Kart Drive Belt torque converter belt Replaces For manco 5959/comet 203589 murray 12-8487 baja Motorsports BB65-395 ken-Bar 300-009 255-299 rotary 8487. Width: 0.4", Length: 27-1/32".
  • 【Wide Use--go kart clutch belt】: The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.
Rank No. #4
Jeremywell 40 Series Torque Converter Kit Clutch Pulley 1" Driver 7/8" Driven 8 to 16HP Belt replaces Comet 40D Series Torq-A-Verter models 209133A 209133 209139A 209139 209151A 209151 and Manco 2432
  • 40 series torque converter kit replaces Comet 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, and Manco 2432.
  • This torque converter fits 8 - 18 hp engines
  • Engagement range: 1600 - 3300 RPM
  • No Instructions Included
Rank No. #5
MOFANS 1" Bore Driver Clutch Fit for 780 Driver Clutch Comet Salsbury Comet 22 HP 4 Cycle Engines
  • Fitment: Fit for Comet 94C Salsbury 500 Series and 700 Series Clutchs, 22HP 4 Cycle Engines.
  • Specification: bore - 1 inch; keyway - 1/4 inch; 1800 rpm engagement.
  • Direct replacement to replace the original part, durable and long lasting on daily use.
  • Package Included: 1 " bore driver clutch as picture show.
  • Note: Before purchase please check specification carefully to confirm this cultch fit your engines.
Rank No. #6
30 Series Torque Converter Clutch, 3/4" Bore with 203589 Go Kart Drive Belt for Compatible with Comet 219552, TAV2 30-75 Manco 5957
  • ✿【30 Series Torque Converter】-- For compatible with Comet 219552, TAV2 30-75; Manco 5957; Yerf Dog Q43201W
  • ✿【About Torque Converter】-- 3/4" Bore for 6.5hp 212CC engines, 3/16" Key way, works with 3HP -7HP engines, fit all engines with 3/4" shaft, for compatible with: For Go Kart, Mini Bike, Lawnmower and more
  • ✿【203589 Go Kart Drive Belt】-- For compatible with Comet Torq-A-Verter Series, 30 Series; Comet 203589, 203589A, 203589-W1, 203589-W2; Manco 5959, 285B, 286B
  • ✿【Abou Belt】--Length 27 1/32", Width 3/4" Asymetrical Belt, for compatible with Comet TAV2 bolt on torque-a-verter kit and most Manco, American Sportworks and Ken-Bar karts with 5-7HP engines
  • ✿【Package Includes】-- 1pc 3/4" Bore 30 Series Torque Converter, 1pc 203589 Belt. Non Original Aftermarket Part. The part/product is not sponsored or endorsed by,or affiliated with the brands it fit,including Comet,Manco,Yerf Dog,American Sportworks,Ken-Bar kart
Rank No. #7
GEATaaT 780 Series Driver Clutch 1" Bore 1/4" Keyway Comet Replace#302405A
  • 【Adaptation Model】This drive clutch for Briggs Stratton Vanguards, Kohler Commands, Robin, Honda, Salsbury, CVTech, CVTech Powerbloc IBC and most other 4 cycle engines with crankshafts size listed above.
  • 【Replace Part Number】302405A,302405.
  • 【Description】1" bore with 1/4" keyway; It takes a 1 3/16 -1 1/4" wide belt; Never run clutch w/o a 1 3/16" - 1 1/4" wide belt installed.
  • 【High Quality】Made of high-quality materials, high reliability and durability, have been tested many times before leaving the factory, meet or exceed OEM standards.
  • 【Perfect service】2 Year Warranty.Friendly return policy and customer service. If you have any questions, please contact us by email, we will reply you within 24 hours.
Rank No. #8
MOOSUN 30 Series Torque Converter Driver Clutch 3/4" Bore Go Kart for Comet 219552 5957
  • This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.
  • Replacement for Go Karts 30 series Engine Comet Manco, 3/4" bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP
  • Featuring 6" diameter with 3/4" Bore, 3/16" Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one.
  • This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load.
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car.
Rank No. #9
BATONECO 30 Series Go Kart Torque Converter Driver Clutch Replacement for Comet Manco 3/4" Bore Max Torque/Go Kart 219552,5957
  • 【Introduction】: A direct replacement kit for the go-kart torque converter 30 series. 3/4" shaft bore with 3/16" key way, designed for 6.5hp 212CC engines. Recommended engine 2HP-8HP.
  • 【Applications】: It fits all engines with a 3/4" Straight Crankshaft. Small engine Torque Converter clutches are commonly used in go karts, mini bikes, and lawn mowers.
  • 【Part Number】: Replaces with part numbers 219552A 30 Series Torque Converter Driver Clutch.Comet 219552, Manco 5957, Yerf Dog Q43201W
  • 【Features】: Made of high quality iron material, this torque converter has the characteristics of lightweight, portable, sturdy, durable, wear-resistant, along with maximum torque and fast heat dissipation. Easy to use, firmly and securely.
  • 【Note】: Please check the TYPE before purchasing. We have professional team to offer you the most friendly customer service. If you have any problem, Please feel free to contact us.
SaleRank No. #10
212CC Torque Converter 6.5 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series
  • 【TORQUE CONVERTER DIY MODIFICATIONS COMPATIBLE】DIY Modifications fits for go karts and mini bikes and drift carts, such as BT200X, cx100, ct200u ex, Massimo Baja 200, doodlebug db30, mini-bike, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. Note This is not made by Comet, just the modification replacements for it. Cars mentioned above not included in package.
  • 【REALLY WAKES UP THE BIKE】 This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. DIY modifications to your Mini Bike require some mechanical ability. I'm sure you can do it!
  • 【BRING YOUR OFF-ROAD MACHINE TO LIFE】This TAV2 30 Series Go Kart Clutch Kit fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design.
  • 【A HUGE IMPROVEMENT OVER THE OLD CENTRIFUGAL CLUTCH】This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. On a lighter buggy or drift cart or mini-bike this will SMOKE your old centrifugal clutch.
  • 【30 SERIES TORUQE CONVERTER BELT FOR 6" DRIVEN】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".(1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".
Rank No. #11
BLACKHORSE-RACING 1" Go Kart Torque Converter CVT Comet Clutch Go Kart Clutch Replaces Comet 219554A 203814A TAV2 30-75 Yerf Dog Manco Mini Bike 10T #40/41/420 Chain
  • This Go Kart Torque Converter Kit fits a 1" shaft and comes with a 10 tooth sprocket for a #420 /#40 /#41 chain. It will work with small engines producing 8 HP-13 HP
  • Unit Replaces Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75, Yerf Dog Drive Unit Q43201W
  • Compatible with most engine with horizontal shaft such as Briggs, Robin, Tecumseh, Hon-da (and clones), Kohler, Clinton, Lifan
  • This kit comes with a 5/8" Driven Clutch with 6" inner Diamerer, fits all engines with a 1" Straight Crankshaft, replaces Comet, also fits Manco Go Karts, Comet 219554A
  • Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, and waterski winches
Rank No. #12
Torque Converter Go Kart Clutch Set 1" For 10T 40/41 and 12T 35 Chain for Manco Comet TAV2 (30 Series)
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
  • Driver clutch bore: 1"(24.5mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions. Includes both 10t for 40/41 chain and 12t for 35 chain
Rank No. #13
MOOSUN Torque Converter Comet Clutch Go Kart Clutch 1 Inch Replaces Comet TAV2 Manco 10T 40 or 41 and 12T 35 Chain Drive Belt (1" 10T 40/41 and 12T 35 Chain)
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
  • Driver clutch bore: 1"(24.5mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions. Includes both 10t for 40/41 chain and 12t for 35 chain
Rank No. #14
WATERWICH 1" Bore 40 Series Go Kart Torque Converter Driver Pulley Clutch Replacement for Comet 40/44
  • 1.This torque converter fits 8 - 16 hp engines,Engagement range: 1600 - 3300 RPM, 1" Shaft Bore,Works with Comet 40/44 Series Torq-A-Verter models,Also Fits Manco Go Karts.
  • 2.Highly replacement for go karts, mini bikes, three wheelers, ATV's, LTV's and other transportation vehicles,40/44 Series, Go Kart Torque Converter Driver Pulley Clutch NOT includes set screws and chain also NOT included.
  • 3.Made of reliable quality Aluminum Alloy,Can effective anti-oxidation and anti-corrosion,Manufactured with the best finish craft ,Comes with shatterproof sealed ,Beautifully built with smooth surface.
  • 4.Replaces Comet 40 Series Torq-A-Verter models 209133A, 209133, 2432, 203015A, 203015. It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters and more,Fits Engines with 1" Shaft and 1/4" Keyway.
  • 5. 40 Series Go Kart Torque Converter Driver Pulley Clutch will help with more take off power by providing more torque in the low end and higher speeds in top end.
Rank No. #15
Torque Converter Go Kart Clutch Set 3/4" 10T 40/41 and 12T 35 Chain for Manco Comet TAV2 (30 Series)
  • Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.
  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
Rank No. #16
Jeremywell 40 Series Torque Converter Driven Clutch 5/8" Bore For Manco 2432 Comet 209133A
  • 40 series torque converter driven clutch replaces Comet 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, and Manco 2432.
  • This torque converter fits 8 - 18 hp engines
  • Engagement range: 1600 - 3300 RPM
  • No Instructions Included
SaleRank No. #17
40 Series GO Kart Torque Converter Driven 3/4" Clutch Pulley REP Comet 40D with 1" Bore CVT Torque Converter Driver Clutch Fits Comet 40/44 Belt 203785A COMET 203785 MANCO 12346
  • ▶ 40 Series GO Kart Torque Converter Driven 3/4" Clutch: HAS 3/4'' HOLE WITH 3/16'' KEYWAY, REPLACES COMET 40/44 SERIES TORQ-A-VERTER
  • ▶ Driver clutch fits all engines with a 1" shaft 1/4 " keyway replaces comet 4044 series torqaverter
  • ▶ 1" BORE GO KART CVT TORQUE CONVERTER DRIVER CLUTCH Replaces COMET 40/44 Series Torq-A-Verter models and works with 8-16hp engines within the 1600-3300 RPM range.
  • ▶ 1" Shaft Bore, 1/4" Keyway, This 40/44 Series is heavily used in three wheelers, ATV's, LTV's , and Go karts
  • ▶ Fitment: GO KARTS, THREE WHEELERS ATV / OTHER SMALL OFF ROAD VEHICLES
Rank No. #18
MRELC 3pcs 30 Series Go Kart Drive Belt Replaces Manco 5959 / Comet 203589,Torque Converter Belt
  • The go-kart drive belt Compatible with most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.
  • Interchange part number: 203589 / 5959.
  • Center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.
  • Width: 0.75", Length: 27-1/32" Fitment: Manco 5959 Comet 203589
  • GOOD PERFORMANCE:Made of excellent quality rubber material,no freys cracks or tears. Designed for superior,high mileage and reliable performance. According to factory specifications,a great replacement belt for the old or,durability,and fit.High quality- no freys cracks or tears. Tested under severe environmental conditions to deliver maximum performance in any terrain or weather.
Rank No. #19
MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4" Bore 10T #40/41/420 China (Complete 3/4" Torque Converter Set)
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft.
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
  • Driver clutch bore: 3/4"(16mm), Driven unit: Overall Diameter 6" (5/8" driven pulley) , Belt Top Width: 19mm(3/4"), Sprocket teeth: 10 teeth for #40/41/420 chain
  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.
Rank No. #20
Jeremywell 40 Series Torque Converter Kit Clutch Pulley 1" Driver 5/8" Driven 8 to16HP Belt replace Comet 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, Manco 2432
  • 40 series torque converter kit replaces Comet 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, and Manco 2432.
  • This torque converter fits 8 - 18 hp engines
  • Engagement range: 1600 - 3300 RPM
  • No Instructions Included

Last update on 2023-07-31 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Comet 94C Torque Converter?

Do you get stressed out thinking about shopping for a great Comet 94C Torque Converter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Comet 94C Torque Converter, which is why we have assembled a comprehensive list of the greatest Comet 94C Torque Converter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Comet 94C Torque Converter that you consider buying. Your questions might include the following:

  • Is it worth buying an Comet 94C Torque Converter?
  • What benefits are there with buying an Comet 94C Torque Converter?
  • What factors deserve consideration when shopping for an effective Comet 94C Torque Converter?
  • Why is it crucial to invest in any Comet 94C Torque Converter, much less the best one?
  • Which Comet 94C Torque Converter are good in the current market?
  • Where can you find information like this about Comet 94C Torque Converter?

We’re convinced that you likely have far more questions than just these regarding Comet 94C Torque Converter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Comet 94C Torque Converter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Comet 94C Torque Converter. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Comet 94C Torque Converter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Comet 94C Torque Converter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Comet 94C Torque Converter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Comet 94C Torque Converter?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Comet 94C Torque Converter.
  5. Customer Ratings: Number ratings grade Comet 94C Torque Converter objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Comet 94C Torque Converter.
  7. Product Quality: You don’t always get what you pay for with an Comet 94C Torque Converter, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Comet 94C Torque Converter is should be an indication of how long it will work out for you.

We always remember that maintaining Comet 94C Torque Converter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Comet 94C Torque Converter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What kind of clutch does a comet 94C snowmobile use?

A: Genuine Comet 94C Torque Converter Clutch. Comet 94C Duster Clutch 206095A. Clutch for Honda Odyssey Conversion Kit and Ski-Doo Ski-Daddler Snowmobiles. Comet Industries USA. Genuine 94C Comet Industries Clutch. 1″ Bore 1/4″ Keyway.

Q: Are there any comet clutches for go karts?

A: Genuine Comet Clutches and Comet Belts for most brands of go karts and mini bikes. Comet 30 Series, Comet 20 Series, Comet 40 Series, Comet 44 Series, Comet 500 Series, Comet 94C Duster Clutches, Comet TAV2 Complete Kits for 3hp to 8hp engines and Comet 103HPQ. Comet CVT Parts – Comet Industries USA. Tech Support Line 318-925-2224 .

Q: How big is the clutch on a comet Duster?

A: Genuine 94C Comet Industries Clutch. 1″ Bore 1/4″ Keyway. Comet 94C Duster Clutches use 1-3/16″ top width belts. Arrives assembled. Contains (6) 206514 Pucks and a 205588 Pink Spring. Engages at approx. 1800rpm. Adjustable engagement with optional spring and roller kits.

Related Post: