20 Best Comfortbilt Pellet Stove Igniter of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Comfortbilt Pellet Stove Igniter of 2023. Check our ranking below.

2,658 Reviews Scanned

Rank No. #1

Igniter for All Models of Comfortbilt/Castle Pellet Stoves

Brand New 6" Comfortbilt Igniter
For all Models of Comfortbilt Pellet Stoves
3/8 " Diameter-110 Volt
Easy Plug in

Rank No. #2

Ytpoools Igniter Compatible with All Models of Comfortbilt/Castle Pellet Stoves

✅This is a Brand New 6 inch Ytpoools Igniter.
✅This Ytpoools Igniter will Compatible with all Models of Comfortbilt Pellet Stoves.
✅Ytpoools Brand New 6 inch Igniter: 3/8 inch Diameter, 110 Volt.
✅Easy Plug in, and you can replace it in a few minutes.
✅We offer a 12 months warranty. True worry-free shopping experience. Feel free to contact us while you're not completely satisfied for any reason.

Rank No. #3

ComfortBilt & Castle Serenity Pellet Stove Maintenance Kit

Included: Igniter (CB-IGNITER) Lower Auger Bearing (CB-LOWER-BEARING) Upper Auger Bearing (CB-UPPER-BEARING) Exhaust Gasket (6.5" dia.) (COMFORTBILT-EXHAUST-GASKET) Large Cleanout Gasket (HP22 & HP61) (LARGE-CLEANOUT-GASKET) Small Cleanout Gasket (HP22I & HP21) (SMALL-CLEANOUT-GASKET) Door Gasket 4ft. (CB Door Gasket) ComfortBilt Backup / Main Power Fuse (250V-10A): CB-FUSE

Rank No. #4

Auger Motor for All Models of Comfortbilt Pellet Stoves

Brand New Auger Motor-Linix YN70-15-8-01
For all Models of Comfortbilt Pellet Stoves
115v 9w 6uf/450v - 50hz 650 R/Min 0.46A
60 hz 750 R/Min 0.55A - 15 RPM at Shaft
Comes with a 2 Year Warranty!

Rank No. #5

Cast Iron Burn Pot for HP22 and HP61 Comfortbilt Pellet Stove

Brand New Burn Pot - Cast Iron!
For HP21, HP22 and HP61 Comfortbilt Pellet Stoves
Artistic/Deep Design
Produces Large Flame

Rank No. #6

Pellethead Replacement US Stove, Vogelzang, Ashley Pellet Stove Igniter Upgrade 80604

Fits Ashley / King Models: AP5710
Fits US Stove Models: Bay Front 5660
Fits Vogelzang Models: VG5770 ~ VG5790
300 Watts, 120V AC. 6-1/4" length from where the wires start to the tip. 3/8" Diameter, 16" Wire Leads.
One Year No Hassle Warranty

Rank No. #7

Replacement Pelpro Pellet Stove Igniter & Pleasant Hearth Pellet Stoves Ignitor for SRV7000-660-AMP

✅SRV7000-660-AMP Igniter compatible with: PelPro PP130, PP130-B, PP60, PP60-B, PP70, PPC90 Cast Iron, TSC90 Cast Iron, Pleasant Hearth; PH35PS, PH50CABPS, PH50PS stoves.
✅SRV7000-660-AMP replacement for Pelpro Pellet Stove Igniter and Pleasant Hearth Pellet Stoves Ignitor.
✅300 W, 110/120 V AC.Furnace Replacement Heating Elements.
✅Measure from hub 4 3/16'', Total length of element 4 7/8'', 12¡å Lead Wires.
✅High quality replacement. Very easy to install.

Rank No. #8

YAOAWE Pellet Stove Igniter Part C-E-IGN Replacement for All Breckwell Stoves, 4'' Fireplace Hot Ignitor 300W, Part Number 80607

🔧TROUBLESHOOTING FOR BRECKWELL PELLET STOVE IGNITER- lgnition problems nearly ALWAYS have something to do with a dirty stove. Make sure your stove, the venting and the clean-out area inside the burnpot cavity where the igniter resides are free and clear and inspect your door gasket and your door latch are in good sealing condition.
EASY INSTALLATION AND STURDY MATERIAL: The lgniter element is used on all Breckwell models of Pellet Stoves from 1998 to present. Replacement Part Models: C-E-IGN, 80607
PERFECT REPLACEMENT FOR YOUR OLD BRECKWELL PELLET STOVE IGNITER PARTS - Compatible Model: P20 Cadet ~ P22 Maverick ~ P23 Sonora ~ P23I Sonora Insert ~ P23I Sonora Insert ~ P24 Blazer ~ P24I Blazer Insert ~ P26 Cadet~ P32i Cadet ~ P1000 Big E ~ P2000 Tahoe ~ P2000I Tahoe Insert ~ P2700 Mojave ~ P4000 Classic Cast ~ P6000 Heartland ~ P7000 Solstice, etc.
KEEPING WARMTH IN WINTER! - 300W 120V pellet stove igniter rod made from durable materials and guaranteed to provide a perfect fit. The metal part of the ignitor is 4" and the wire lead is 12.6",male spades connectors are easy to install, which can help you to keep warmer with family in winter.
💯AFTER-SALES SERVICE FOR PELLET STOVE IGNITER PARTS - If you encounter any problems during the installation and use, please do not hesitate to contact us. We have a professional after-sales team that will provide you with the most effective solution within 24 hours.

Rank No. #9

gohantee PU-CHA Igniter Compatible with Englander Pellet Stove Igniter, England Stove Works Igniter 300W 4.75"

[FITMENT] The England Stove Works Igniter compatible with Englander Stoves: 25-EP, 25-EPI, 25-IP, 25-PAF, 25-PAH, 25-PDV, 25-PDVC, 25-PFS, 25-PI.
[REPLACE PART NUMBER] PU-CHA, PU-CHA /AMP-CIENG. 120V 9.5*123 300W Igniter replacement for England Stove Igniter.
[SPECIAFICS] 3/8 inch diameter Anti-seize Threading Easy to install and uninstall. 120 Volts 300 Watts Provide continuous sheath temperatures up to 1,200Ã‚° F. Female Spades Connectors Quick Connect.
[PREMIUM QUALITY] High Temperature Wire - Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications) over stranded Grade "A" nickel wire. Heat Shrink used on solder joints to prevent breaking.
[SERVICE GURANTEE] Package include: 1Pc x PU-CHA Englander Igniter. If it fails on you stove, feel free to contact us any time.

Rank No. #10

Pellet Stove Igniter Fit for All Breckwell models Stoves 300W Ignitor Replacement #80607 C-E-IGN Hot Rod Starter Element 4"

Compatible: The pellet stove igniter works with all Breckwell models of pellet stoves, 1998 to present
Replacement Part Numbers: CE-IGN, 80607, 80619, 80481
High Quality: The pellet stove igniter is a high temperature wire made of fiberglass insulation (glass braided glass strands provide good insulation for high temperature process heating applications) on stranded "A" grade nickel wire，(840o F / 450o C) heat shrink tubing on solder joints to prevent breakage
Specifications: Wattage: 300 Watts, 120 Volts, igniter with 4" metal section length, 12.6" lead wire, provides continuous jacket temperature up to 1,200°F
Package Includes: 1 CE-IGN pellet stove igniter

Rank No. #11

gohantee SRV7000-462 Loop Igniter Compatible with Quadrafire Pellet Stove Eco Choice Igniter Replace 812-3811

[FITMENT] 380W Loop Igniter compatible with: Eco Choice CAB50, PS35, PS50; Quadra-Fire Castile, Castile F/S, Castile FS MBK, Contour, Mt Vernon, Mt Vernon E2i, Santa Fe, Santa Fe B.
[REPLACE PART NUMBER] Part#: SRV7000-462, Replacement for old Quadra-Fire part# SRV7000-226, 7001-226, and 7000-020 igniter replacement for Eco Choice stoves and Quadra-Fire stoves igniters.
[SPECIAFICS] Single Element Listing, 380 Watts, 120V AC, Element: 3/4 inches Wide x 4 3/8 inches in Length x 1/4 inches Diameter Rod. Wires are thermally protected and are 18 inches in length with male connectors.
[PREMIUM QUALITY] High Temperature Wire - Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications) over stranded Grade "A" nickel wire. Heat Shrink used on solder joints to prevent breaking.
[SERVICE GURANTEE] Package include: 1Pc x SRV7000-462 Igniter. If it fails on you stove, feel free to contact us any time.

Rank No. #12

80619 80481 - King Ashley Pellet Stove Igniter, Ignitor - 13-1115 FC

Fits models 5500, 5500XL, 5700
250 Watts, 110 Volts
4 inces long by 3/8 inch diameter
FREE Tech Support. Use amazon messager to contact seller.
5 Year Life Expectancy. 1 Year warranty

Rank No. #13

YAOAWE Pellet Stove Igniter Parts Fit for Napoleon & TimberWolf Stoves, 275W Hot Rod Ignitor Replacement Part Model W010-1949, W010-2297, W357-0007

🔧TROUBLESHOOTING FOR NAPOLEON PELLET STOVE IGNITER - If your igniter is getting hot but mot igniting, make sure the damper below the burnpot is closed. If you are experiencing longer than usual ignition times consider replacing your door gasket.
👉PERFECT REPLACEMENT KIT FOR YOUR OLD NAPOLEON STOVE PARTS IGNITER - Compatible with Napoleon models: NPI 40, NPI 45, NPS40, NPS45. Compatible with TimberWolf models: TPI35 Economizer, TPS35 Economizer
🔍STURDY AND DURABLE - Pellet stove igniter made from stainless steel material and guaranteed to provide a perfect fit. Replacement Part Models: W010-1949, W010-2297, W357-0007
🔥NO MORE FEAR OF COLD THIS WINTER: Package included 275W igniter ×1. The metal part of the ignitor is 4.5", diameter is 3/8"and the wire lead is 10.5", male spades connectors are easy to install, which can help you to keep infusing family with warmthin this season!
💯AFTER-SALES SERVICE FOR PELLET STOVE IGNITER PARTS - If you encounter any problems during the installation and use, please do not hesitate to contact us. We have a professional after-sales team that will provide you with the most effective solution within 24 hours.

Rank No. #14

CBR Remote Control for All Models of Comfortbilt Pellet Stoves

Brand New Remote Control - CBR1
For all Models of Comfortbilt Pellet Stoves-Hold Temperature Button
25 Ft. Range, On/Off Buttons, Battery Included
Comes with a 2 Year Warranty!

Rank No. #15

Quadrafire Pellet Stove Ignitor 7000-462!! (1)

QUADRA FIRE MULTI-FUEL LOOP IGNITER ELEMENT
Part # SRV7000-462
380 Watt, 120V AC
Thermally Protected Wires- 18" length with Male Connectors
Tech Support with Every Purchase - 1 Year Warranty!

Rank No. #16

Replacement US Stove Vogelzang Ashley King Pellet Stove Igniter Update 80604

Fits Ashley / King Models: AP5710
Fits US Stove Models: Bay Front 5660
Fits Vogelzang Models: VG5770 ~ VG5790
300 Watts, 120V AC. 6-1/4" length from where the wires start to the tip. 3/8" Diameter, 16" Wire Leads.
One Year No Hassle Warranty

Rank No. #17

US Stove Co 250W Igniter, Pellet Stove Part King & Ashley Igniter and USSC #80619/80481 FREE PRIORITY SHIPPING!

US Stove (USSC) King & Ashley Igniter Element
Correct replacement for 80607 / 80619 / 80481 / AMP-CI4
250 Watts, 120V AC, 3/8" Dia, 4" Total Length
Full 1 Year Warranty starting from Date of purchase - no hassel

Rank No. #18

gohantee SRV7000-660-AMP Igniter Compatible with Pelpro Pellet Stove Igniter & Pleasant Hearth Pellet Stoves Ignitor Replacement Ignitors 300W

[FITMENT] SRV7000-660-AMP Igniter compatible with: PelPro PP130, PP130-B, PP60, PP60-B, PP70, PPC90 Cast Iron, TSC90 Cast Iron, Pleasant Hearth; PH35PS, PH50CABPS, PH50PS stoves.
[REPLACE PART NUMBER] SRV7000-660-AMP replacement for Pelpro Pellet Stove Igniter and Pleasant Hearth Pellet Stoves Ignitor.
[SPECIAFICS] Watts: 300, Length: 4 7/8″ Total, Width: 3/8", Connectors: Male Spades.
[PREMIUM QUALITY] High Temperature Wire - Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications) over stranded Grade "A" nickel wire. Heat Shrink used on solder joints to prevent breaking.
[SERVICE GURANTEE] Package include: 1Pc x SRV7000-660-AMP Igniter. If it fails on you stove, feel free to contact us any time.

SaleRank No. #19

Pellet Stove Igniter Fit for Pelpro & Pleasant Hearth Stoves Ignitor Replacement Ignitors 300W #SRV7000-660-AMP

Compatible with: The pellet stove igniter compatible with PelPro PP130, PP130-B, PP60, PP60-B, PP70, PPC90 Cast Iron, TSC90 Cast Iron and Pleasant Hearth; PH35PS, PH50CABPS, PH50PS stoves
Part Number: SRV7000-660-AMP
High Quality: The pellet stove igniter high temperature wire, made of fiberglass insulation (glass braided glass strands provide good insulation for high temperature process heating applications) on stranded "A" grade nickel wire
Specifications: Wattage: 300W, Overall Length: 4 7/8", Width: 3/8", Connector: Male Spades
Recommendation: Replace the door gasket one piece at the same time the ignition rod is replaced, a leaking door gasket is often a factor in pellet stove igniter failure

Rank No. #20

Homaisson Pellet Stove Igniter, SRV7000-660-AMP Igniter Compatible with Pel Pro 130/60 Stoves, 120V 300W Stove Igniter Replacement, Fireplace Hot Rod Igniter

【Wide Compatibility】The SRV7000-660-AMP Igniter is compatible with a variety of pellet stove models, including PelPro PP130, PP130-B, PP60, PP60-B, PP70, PPC90 Cast Iron, TSC90 Cast Iron, Pleasant Hearth PH35PS, PH50CABPS, and PH50PS stoves. This wide range of compatibility makes it easy for you to upgrade your stove without worrying about compatibility issues.
【Excellent Performance】With a power rating of 300W and a voltage of 120V, the SRV7000-660-AMP Igniter delivers excellent performance, making it perfect for use in sawdust pellet grills and fireplaces. The insulation of ≥50MΩ and withstanding voltage of 1800V/2S ensure that this igniter will perform reliably for years to come.
【Quality 310S Material】The SRV7000-660-AMP Igniter is made from quality 310S material, including fiberglass insulation and stranded Grade A nickel wire. These materials make it durable and long-lasting, so you wont have to worry about constantly replacing your igniter. Heat shrink is also used on solder joints to prevent breaking.
【Service Guarantee】We are confident in the quality of our product, which is why we offer a service guarantee. If the SRV7000-660-AMP Igniter fails on your stove, you can reach us at any time for a replacement.
【Easy Replacement】If you need to replace your old pellet stove igniter, the SRV7000-660-AMP is the perfect replacement part number for both Pelpro Pellet Stove Igniter and Pleasant Hearth Pellet Stoves Ignitor. This easy-to-install igniter will have your stove up and running in no time.

Last update on 2023-08-19 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Comfortbilt Pellet Stove Igniter?

Do you get stressed out thinking about shopping for a great Comfortbilt Pellet Stove Igniter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Comfortbilt Pellet Stove Igniter, which is why we have assembled a comprehensive list of the greatest Comfortbilt Pellet Stove Igniter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Comfortbilt Pellet Stove Igniter that you consider buying. Your questions might include the following:

Is it worth buying an Comfortbilt Pellet Stove Igniter?
What benefits are there with buying an Comfortbilt Pellet Stove Igniter?
What factors deserve consideration when shopping for an effective Comfortbilt Pellet Stove Igniter?
Why is it crucial to invest in any Comfortbilt Pellet Stove Igniter, much less the best one?
Which Comfortbilt Pellet Stove Igniter are good in the current market?
Where can you find information like this about Comfortbilt Pellet Stove Igniter?

We’re convinced that you likely have far more questions than just these regarding Comfortbilt Pellet Stove Igniter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Comfortbilt Pellet Stove Igniter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Comfortbilt Pellet Stove Igniter. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Comfortbilt Pellet Stove Igniter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Comfortbilt Pellet Stove Igniter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Comfortbilt Pellet Stove Igniter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Comfortbilt Pellet Stove Igniter?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Comfortbilt Pellet Stove Igniter.
Customer Ratings: Number ratings grade Comfortbilt Pellet Stove Igniter objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Comfortbilt Pellet Stove Igniter.
Product Quality: You don’t always get what you pay for with an Comfortbilt Pellet Stove Igniter, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Comfortbilt Pellet Stove Igniter is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Comfortbilt Pellet Stove Igniter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Comfortbilt Pellet Stove Igniter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

20 Best Comfortbilt Pellet Stove Igniter of 2023 – Romance University

How Do You Buy The Best Comfortbilt Pellet Stove Igniter?

Related Post: