18 Best Otc 4631 of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Otc 4631 of 2022. Check our ranking below.
2,619 Reviews Scanned
Rank No. #1
OTC 4631 8-Piece Battery Terminal Service Kit
- Used to work on battery terminals
- Includes one 4611 battery terminal puller, one 4612 3-way battery post cleaner, one 4613 battery pliers, one 4614 side terminal battery wrench
- Also includes one 4615 long-side terminal wrench, one 4616 battery terminal wrench 10mm, one 4617 side terminal battery brush and one 4622 battery cable cutter
- All included in a blow molded case
Rank No. #2
OTC 4531 Harmonic Balancer Puller and Installer Set
- For easy removal and installation of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft.
- AUTO_ACCESSORY
- For easy removal and installation of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft.
Rank No. #3
OTC 4534 Multi Purpose Bearing and Pulley Puller Set
- For a wide range of pulling jobs including: bearings; alternator, generator, power steering, and crankshaft pulleys; timing gears; harmonic balancers; and more
- Drop-forged components can be used in a variety of combinations
- Set components deliver a spread of 3 inches to 5 inches and a reach of 1 inch to 2-1/4 inches
- Kit includes 2 ea. forcing screws (live center), 2 ea. cross-bar yokes, 2 ea. clamp bolts, 3 pairs of puller jaws, 1 pair of jaw pins with ball spring, and 3 pairs of capped bolts
- Durable blow-molded plastic storage case that keeps set components contained and organized so they are ready for use when needed
SaleRank No. #4
OTC 4555 Heavy-Duty Oil Filter Wrench - 4-1/8" to 4-21/32" Capacity
- OTC Heavy-Duty Oil Filter Wrench
- Fits spin on filters ranging from 4-1/8 inches to 4-21/32 inches (104 mm to 118 mm) in diameter
- Features a 1-1/2 inch wide steel band that can stand up to the high torque needed to remove filters from trucks, tractors, and other heavy equipment
- Use with a 1/2 inch drive ratchet or breaker bar
- High-grade materials ensure quality performance over the lifetime of the tool
Rank No. #5
OTC 4461 6-Piece Automotive Terminal Release Tool Set with Case
- save time and money by repairing or rebuilding a wiring harness instead of having to order an entire oe replacement
- services most oe terminal connectors - simply insert the appropriate release tool to depress the locking tab and the individual wire slides out for service or replacement
- no. 7737 computer edge board and header release tool - doubled ended for different applications; no. 7738 weather pack sensor terminal release tool; no. 7740 micro-style terminal release tool
- no. 7741 computer terminal release tool for i.d. computer terminals; no. 7742 universal harness release tool; no. 7743 terminal release tool - releases terminals on most body wiring connectors
- all tools fit various import and domestic cars, trucks, and suvs; rugged blow-molded plastic storage case keeps tools contained and organized so they are ready when you are
Rank No. #6
OTC 4673 Sensor Socket Set - 7 Piece
- 7-Piece Sensor Socket Set Includes: 4673-1 - 29 mm Vacuum Switch and O2 Socket, 1/2" Drive, 4673-2 - 7/8" Vacuum Switch and O2 Socket (wide slot), 3/8" Drive, 4673-3 - 27 mm Thermal Sensor Switch, 1/2" Drive, 4673-4 - 7/8" Vacuum Switch and O2 Socket (narrow slot), 3/8" Drive, 4673-5 - 1-1/16" & 1" Oil Pressure Sending Unit Socket, 3/8" Drive, 4673-6 - 7/8" O2 Sensor Socket, offset 1/2" Drive, and 4673-7 - 7/8" O2 Sensor Socket (low profile), offset 3/8" Drive. Also includes blow molded case to keep set contents contained and organized when not in use
- Item Package Dimension: 10.66L x 8.65W x 2.67H inches
- Item Package Weight - 5.05 Pounds
- Item Package Quantity - 1
- Product Type - FASTENER DRIVE BIT
Rank No. #7
OTC 4567 3-3/4" to 4-3/8" Swivel Handle Oil Filter Wrench
- Features a 1" wide stainless steel band for positive grip on the filter
- Swivel handle makes it easy to turn filters in hard-to-reach areas
- Fits filters ranging from 3-3/4" to 4-3/8" or 95 mm to 111 mm in diameter
Rank No. #8
OTC 4676 Windshield Wiper Puller
- Safely removes wiper arms on a wide variety of foreign and domestic Cars, SUVs, Vans, and Light Trucks
- Engineered to ensure no damage will occur to wiper arm hood or cowling during wiper arm removal
- Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft to remove the wiper arm
- Tool features a throat depth of 1-1/16 inches; foot spacing accomodates wiper shafts up to approximately 5/8 inch diameter
- Features a rugged metal frame and forcing screw with rounded tip to engage small depression on windshield washer shaft or loosened nut - keeping the screw centered on the shaft for optimum performance
Rank No. #9
OTC 4722 Stinger Heavy-Duty CV Boot Clamp Installer
- Designed to clamp the ear-type CV boot clamps used on front-wheel drive vehicles
- May also be used to crimp the clamps used on fuel and cooling system hoses
- Ensures even precise crimping and eliminates possibility of damage to the clamp boot or hose
Rank No. #10
OTC 465 5-Ton 'GripLock' External and Internal Puller
- OTC's 5-Ton 'GripLock' Puller features a 7 inch maximum reach and a 3-7 inch spread
- Pressure bearing yoke cap holds jaws in place for ease of set up - in any orientation
- Configurable as a 2 or 3 jaw puller to suit your needs
- Both external and internal pulling action
- Live Center' action forcing screw
Rank No. #11
OTC 4731A Damper Holding Tool for Acura and Honda
- Holds damper for removal and installation of the crank bolt on most Honda/Acura engines
- Can remove and install the damper so engine will not rotate
- Will fit around accessories eliminating additional part removal
- 1/2 inch square drive can be used with ratchet or breaker bar
- Proper fit for applications and allows use of impact tool to remove bolt
Rank No. #12
OTC 4543A 4WD Spindle Nut Socket Set - 6 Piece
- Chrome vanadium steel sockets cover most of the SUV and light truck applications
- Sockets have 1/2 inch square drive allowing use of a torque wrench ratchet or breaker bar
- A blow-molded plastic storage case keeps set contents organized and protected from loss
Rank No. #13
OTC OTC222395 Forcing Screw Assembly
- Product Type: Auto Part
- Package Quantity: 1
- Package Dimensions: 51.0" (L) x 31.0" (W) x 8.0" (H)
- Country Of Origin: Taiwan
Rank No. #14
OTC OTC4513-3 Straight Tip Xxx
- Tip, heavy duty straight, high quality
- Tip
- Heavy duty straight, high quality
- Made in Taiwan
Rank No. #15
OTC Tools 7481 Supply Tube Removal Tool
- Removes the high pressure fuel supply tube
- Fits Ford 6.0L diesel engines, 2003-2010
- Similar to 303-1164
Rank No. #16
OTC 6024 Crankshaft Positioning Tool for Ford, Black
- OTC Crankshaft Positioning Tool for use on 1993 and newer Ford 4.2L V6; 4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines - same as Ford No. 303-448
- Handy tool prevents accidental movement of the crankshaft when doing camshaft or timing chain service or installation on these 'interference' engines
- Preventing timing misalignment on these 'interference' design Ford engines is critical as valves will contact pistons if timing chain is installed in an incorrect position, resulting in severe damage
- Simply install crankshaft positioning tool over crankshaft snout (aligning crankshaft woodruff key with keyway on tool) and engine front cover alignment dowel to correctly position crank at TDC
- OTC recommends (but does not require) that the No. 6024 Crankshaft Alignment Tool be used with Nos. 6009 and 6020 Camshaft alignment tools to safeguard alignment when servicing cams or chains
Rank No. #17
OTC 6731 Ball Joint Adapter Update Kit for Ford
- Ball Joint Adapter Update Kit for select Ford vehicles
- Must be used in conjunction with an OTC Ball Joint Press and other OTC ball joint tools to perform a complete ball joint replacement - this set is for installation only
- Set includes: (38355A) Installing Cup, (531739) Receiving Cup, and (204508A) Receiving Cup
- Works with select Ford Trucks, Excursions, Expeditions, Explorers, and Rangers - see product description for a complete list of vehicles and model years
- Rugged construction ensures reliable long-term service
Rank No. #18
OTC Puller Set, 11 Pieces, Multipurpose, 2 Jaws - 4532
- Push puller is the best pulling choice when threaded holes are not available
- Great solution for many applications like: heavy-duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, harmonic balancers, and more
- Features a classic 'H Bar' style puller block accommodating a 7 inch to 11 inch application spread
- Comes with 2 sets of forged jaws for a pulling reach range of 5 inches to 9 inches; two forcing screws are included for short and long pulls
- Tempered for heavy-duty applications ; durable blow-molded storage case keeps tools contained and organized so they are ready when you need them
How Do You Buy The Best Otc 4631?
Do you get stressed out thinking about shopping for a great Otc 4631? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Otc 4631, which is why we have assembled a comprehensive list of the greatest Otc 4631 available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Otc 4631 that you consider buying. Your questions might include the following:
- Is it worth buying an Otc 4631?
- What benefits are there with buying an Otc 4631?
- What factors deserve consideration when shopping for an effective Otc 4631?
- Why is it crucial to invest in any Otc 4631, much less the best one?
- Which Otc 4631 are good in the current market?
- Where can you find information like this about Otc 4631?
We’re convinced that you likely have far more questions than just these regarding Otc 4631, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Otc 4631, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Otc 4631. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Otc 4631 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Otc 4631 currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Otc 4631 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Otc 4631?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Otc 4631.
- Customer Ratings: Number ratings grade Otc 4631 objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Otc 4631.
- Product Quality: You don’t always get what you pay for with an Otc 4631, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Otc 4631 is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Otc 4631 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Otc 4631 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.