18 Best Otc 5038 of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Otc 5038 of 2022. Check our ranking below.

2,566 Reviews Scanned

Rank No. #1

OTC 5038 Brake Anchor Pin and Pin Bushing Service Set

No need to remove the bearing hub assembly just to replace the pins and bushings
Works on 16-1/2" S-Cam trailer and tractor Q brake systems
Special tooling and our C-Frame press get you past the hub assembly
Do the job quickly and professionally without damaging other parts
Includes everything needed for removal and replacement

Rank No. #2

OTC Tools 503896

SaleRank No. #3

OTC 7249 Ball Joint, U-Joint, and Brake Anchor Pin Service Kit with Storage Case , Gray

OTC's Ball Joint, U-Joint, and Brake Anchor Pin Service Kit removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins.Fit Type: Universal
Clamp frame features heavy duty materials and construction to prevent distortion in severe use cases
Contains 3 receiver tubes - 2-3/4 inch ID x 3 inch OD, 2-1/4 inch ID x 2-1/2 inch OD, and 1-3/4 inch ID x 2 inch OD
Includes 1 each; installing cup, receiving cup, and installing adapter
Sturdy blow molded hard case keeps contents protected and secure when not in use

SaleRank No. #4

OTC 1038 7-Ton 'Grip-O-Matic' Puller - Long 2/3 Jaw (Mechanical)

OTC's 7-ton capacity, long 2/3-jaw, gear and bearing puller is easily configurable as either a 2 or 3 jaw puller enabling you to remove and install a wider variety of parts for fast, effective repairs
Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
Maximum reach - 8-3/4 inches; maximum spread - 11 inches
Jaw thickness - 11/32 inch; jaw width - 1 inch
Center screw size - 11/16-18 x 9 inches long

SaleRank No. #5

OTC (938) 17-1/2 Ton Push Puller

Maximum reach is 11-1/2 inches
Spread of 3-1/8 inches - 11-3/4 inches
Screw size 1 inch-14 x 13-1/4 inches
It can be used with several different attachments depending on the job

SaleRank No. #6

OTC (522) Large Gear and Pulley Puller

With OTC's 522 Large Gear and Pulley Puller you can easily remove a wide range of gears, pulleys or other parts that have tapped holes
Spread from 2 inches to 7-3/4 inches; block is 8-1/4 inches wide
Forcing screw is 3/4 inch-16 x 11-5/8 inches long
Accommodates any cap screw up to 1/2 inch diameter
Similar to Ford D80L-522-A and 303-D025

SaleRank No. #7

OTC (7394) Universal Hub Puller

Adjustable sliding arms
This puller makes wheel-hub removal quick, easy, and damage free
Maximum bolt circle of 7-1/2 inches
Won't distort wheel lugs
Includes striking wrench and puller screw

SaleRank No. #8

OTC (7168) 30" Jimmy Bar

OTC Jimmy Bars are versatile tools with a multitude of uses, from prying to aligning - flattened on one end, tapered to a point on the other
30 inches in length
7/8 inch diameter
Forged from chrome alloy steel
Heat-treated to resist bending and breaking

Rank No. #9

OTC 1039 13-Ton 'Grip-O-Matic' Puller - 2 Jaw (Mechanical)

OTC's 13-ton capacity, 2-jaw, gear and bearing puller enables you to remove and install parts for fast, effective repairs
Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
Maximum reach - 11 inches; maximum spread - 12 inches
Jaw thickness - 9/16 inch; jaw width - 1 inch
Center screw size - 13/16-16 x 12 inches long

Rank No. #10

OTC 4579 9-Way Slide Hammer Puller Set , Black

Pulls flange-type rear axles and most front-wheel drive hubs
Internal and external jaws provide a variety of combinations to pull bearings gears and seals
Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs
Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling
Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments

Rank No. #11

OTC 4534 Multi Purpose Bearing and Pulley Puller Set

For a wide range of pulling jobs including: bearings; alternator, generator, power steering, and crankshaft pulleys; timing gears; harmonic balancers; and more
Drop-forged components can be used in a variety of combinations
Set components deliver a spread of 3 inches to 5 inches and a reach of 1 inch to 2-1/4 inches
Kit includes 2 ea. forcing screws (live center), 2 ea. cross-bar yokes, 2 ea. clamp bolts, 3 pairs of puller jaws, 1 pair of jaw pins with ball spring, and 3 pairs of capped bolts
Durable blow-molded plastic storage case that keeps set components contained and organized so they are ready for use when needed

SaleRank No. #12

OTC 465 5-Ton 'GripLock' External and Internal Puller

OTC's 5-Ton 'GripLock' Puller features a 7 inch maximum reach and a 3-7 inch spread
Pressure bearing yoke cap holds jaws in place for ease of set up - in any orientation
Configurable as a 2 or 3 jaw puller to suit your needs
Both external and internal pulling action
Live Center' action forcing screw

SaleRank No. #13

OTC 7393 Gear and Pulley Puller with 5-1/2" Long Forcing Screw

OTC's 7393 Gear and Pulley Puller is perfect for removing timing gears, fan pulleys, harmonic balancers, and many other parts having tapped holes
Puller features a spread of 1-1/2 inches to 4-1/4 inches
Puller block is 4-7/8 inches wide
5-1/2 inch long center screw; includes 2 ea. 3/8-16 x 3 inch long hex head cap screws
High-grade materials ensure quality performance over the lifetime of the tool

Rank No. #14

OTC - 7180 Bearing Cup Replacer,Heavy-Dut

OTC's Universal Bearing Cup Installer is designed to install wheel bearing cups in a wide range of heavy-duty axles
Simply adjust and lock the jaws to the cup I.D., slip on the new cup, set it in the bore, and drive it in with a hammer - that’s it - done
Helps eliminate the damage caused by makeshift methods
For use on 11,000 lb. to 50,000 lb. capacity axles; Adjusts to fit 3-5/8 to 6-1/2 inch O.D. bearing cups - versatile tool replaces up to 30 individual drivers
High-grade materials ensure quality performance over the lifetime of the tool

Rank No. #15

OTC 1023 2-Ton Reversible Jaw 'Grip-O-Matic' Puller - 2/3 Jaw (Mechanical)

OTC's 2-ton capacity, 2/3-jaw, reversible gear and bearing puller is easily configurable as either a 2 or 3 jaw puller enabling you to remove and install a wider variety of parts for fast, effective repairs
Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
Maximum reach - 3-1/4 inches; maximum spread - 4-3/4 inches
Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch; upper jaw width - 1/4 inch, lower jaw width - 1/2 inch
Center screw size - 3/8-24 x 4-7/8 inches long

Rank No. #16

OTC (1180) 10-Ton Capacity Push Puller Set

3 popular OTC bar-type pullers in one versatile set, all packed in a handy plastic storage case; permits damage-free pulling of gears, bearings, harmonic balancers, and other parts with tapped holes
Ideal for servicing heavy-duty trucks, off-road construction equipment, and machinery
Set consists of a No. 927 10-ton push-puller with 6-3/4 inch puller legs, an 8-3/8 inch reach and a 2-1/8 to 7-1/4 inch spread
No. 522 Gear and Pulley Puller has a spread range of 2 inches to 7-3/4 inches when used with 1/2 inch cap screws (cap screws not included)
No. 7393 Gear and Pulley Puller includes 5-1/2 inch long and 13 inch long forcing screws and two 3/8-16 x 3 inch long hex head cap screws; spread range is 1-1/2 to 4-1/4 inches

SaleRank No. #17

OTC 4581 Slide Hammer and Blind Hole Bearing Puller Set

The OTC blind hole bearing puller set is for those jobs requiring an internal pull
set includes four collets sizes 7/16 inch to 1/2 inch, 9/16 inch to 11/16 inch, 5/8 inch to 1 inch, and 1 inch to 1-1/4 inch which fit a wide range of applications
Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit the hole, and then attach the slide hammer
Includes a 2-1/2 pound slide hammer with a T-handle
Blow-molded plastic storage case keeps set contents organized and protected from loss

Rank No. #18

OTC 518 Flange-Type Puller for 2 or 3 Bolt Applications - Includes 6 Cap Screws in Two Sizes

Pulls harmonic balancers, timing gears and parts having two or three tapped holes
Flange type puller
Slotted holes in puller body permit cap screws to be positioned to handle bolt circle diameters from 1-1/2 inch to 4-5/8 inches
Includes three cap screws 3/8-24 x 3 inches long, and three cap screws 3/8-16 x 3 inches long
Durable materials and quality engineering ensure ease of use and long term performance

How Do You Buy The Best Otc 5038?

Do you get stressed out thinking about shopping for a great Otc 5038? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Otc 5038, which is why we have assembled a comprehensive list of the greatest Otc 5038 available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Otc 5038 that you consider buying. Your questions might include the following:

Is it worth buying an Otc 5038?
What benefits are there with buying an Otc 5038?
What factors deserve consideration when shopping for an effective Otc 5038?
Why is it crucial to invest in any Otc 5038, much less the best one?
Which Otc 5038 are good in the current market?
Where can you find information like this about Otc 5038?

We’re convinced that you likely have far more questions than just these regarding Otc 5038, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Otc 5038, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Otc 5038. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Otc 5038 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Otc 5038 currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Otc 5038 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Otc 5038?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Otc 5038.
Customer Ratings: Number ratings grade Otc 5038 objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Otc 5038.
Product Quality: You don’t always get what you pay for with an Otc 5038, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Otc 5038 is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Otc 5038 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Otc 5038 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best Otc 5038 of 2022 – Romance University

How Do You Buy The Best Otc 5038?

Related Post: