18 Best Otc 4122A of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Otc 4122A of 2022. Check our ranking below.
2,135 Reviews Scanned
- OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters
- Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool
- Completes the job in a fraction of the time that traditional methods take
- Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings
- No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work
- All three pullers have been redesigned to make the removal of semi-floating rear axle bearings easier
- The new design allows you to capture the bearing firmly distributing the pulling force over the entire bearing
- This reduces damage and increases the amount of applications
- Set includes three pullers to service most domestic cars
- Includes one each 7495A 7496A and 7497A and a storage case
- Ideal for push/pull applications found in off-highway construction mining and other industries where heavy equipment is maintained
- Center hole permits extending screws cables straight through the ram for versatility of application
- Chrome-plated piston rods resist wear and superior packing and seals provide high cycle life without leakage
- 10-Ton capacity 2-1/2 inch stroke and a 49/64 inch center hole diameter
- Retracted height is 5-5/16 inches and the extended height is 7-13/16 inches
- 4 ton capacity
- Very competitively priced, yet high quality set that includes a single-speed hydraulic hand pump, hose, and ram
- Components snap together for quick setups to apply pushing, spreading, or pulling force
- Components include: hydraulic pump, hose, and ram; ram flat base; extension tubes (4); 1/2-ton spreader; tube coupling; ram toe; wedge head; serrated saddle; flex head; plunger toe; 90° wedge head; storage case
- OTC's Diesel Engine Stand features robust materials and construction to effortlessly support heavy truck diesel engines or transmissions for rebuilding and other procedures
- 96-to-1 ratio worm and gear set smoothly rotates the mounted engine a full 360 degrees for easy access to any component or location on the engine; handle locks in any position
- Built-in 12-ton jack raises the engine or transmission on the stand to provide the swing radius necessary for full rotation clearance
- 2 large metal front wheels and 2 rugged rear casters allow for full maneuverability of the stand, loaded or unloaded
- Included No. 205061 Universal Engine Adapter Assembly permits use with a wide variety of mounting plates (not included) that fit most heavy duty diesel engine and transmission applications
- Reduces service time to remove and install HD rear suspension bushings substantially
- Works on Hendrickson Primaax EX, Comfort Air and FCCC V-Ride Pivot and D-Pin suspension bushings
- Tool mounts to suspension for less weight to hold
- Tool includes adapters to align it to bushing axis to reduce likelihood of improper installation
- Includes a high-force 25-ton cylinder for hard-to-remove bushings and also includes the OTC Stinger Series 2510A Air/Hydraulic Pump, with a Hose and Coupler
- Ball Joint Adapter Update Kit for select Ford vehicles
- Must be used in conjunction with an OTC Ball Joint Press and other OTC ball joint tools to perform a complete ball joint replacement - this set is for installation only
- Set includes: (38355A) Installing Cup, (531739) Receiving Cup, and (204508A) Receiving Cup
- Works with select Ford Trucks, Excursions, Expeditions, Explorers, and Rangers - see product description for a complete list of vehicles and model years
- Rugged construction ensures reliable long-term service
- Special design enables the OTC 4274 or OTC 4275 to be used on Hendrickson PRIMAAX EX, COMFORT AIR, FCCC V RideTM rear suspensions Pivot and D-Pin bushings. Eliminates the need for system bleeding.
- Custom plate design allows for exact fit with suspension pieces
- Custom adapter designs align tool properly to reduce likelihood of bushing damage
- For OTC 5079 Heavy-Duty Power Steering Pump Analyzer / Flowmeter
- Works on systems using J.I.C. 37?, 5/8" and 3/4" fittings
- Includes 4 pieces
- --
- --
- Easily removes damper pulleys. Fits into tight engine compartments, no need to remove radiator
- Specially designed jaw tips fit small puller Pockets found on the back of the pulley
- This product is manufactured in United States
- Fit type: Vehicle Specific
- Center-hole rams are ideal for jobs that require a great deal of force and a relatively short stroke
- Compared to the force it develops, the ram is lightweight, compact, and easy to handle, permitting its use in confined quarters
- Center-hole feature allows extending jacking screws, cables, puller screws, and more to be insterted through the ram
- For use with OTC Grip-O-Matic pullers, push-pullers, and shop presses; Engineered for increased strength and durability and meets the ASME B30.1 standards
- Specifications: Capacity: 30 Tons, Stroke: 2-1/2 inches, Height Collapsed: 7-3/4 inches, Height Extended: 10-1/4 inches, Adapter Plate: Yes, included, Effective Ram Area: 6-1/8 Square inches, Cubic Inch Oil Capacity: 15.46
- OTC's Bearing Splitters feature 'knife-like' edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited
- When used with an OTC 'Grip-O-Matic' puller, puller jaws grip attachment’s outer edge
- When used with a Push-Puller, puller legs are threaded into the attachment’s two tapped holes
- Constructed from high strength materials designed for long term use under the harshest conditions
- Min/max spread - 1/2 to 5-3/4 inches; distance between threaded inserts - 6 inches; tapped holes in face of splitter halves - 5/8-18; use with puller nos. 1035, 1040, 1041, 1042, 1065, 1063, and 938
- Run large single or double acting rams for fast frame straightening wheel alignment
- Deliver up to 45 cubic inch minimum at maximum operating pressure of 10000 PSI
- 2-position/2-way valve with advance and return positions and is for use with single-acting rams
- 1/2 hp single phase 60 Hz 115 volt thermal protected electric motor
- 6 foot remote control cord for on/off control
- Standard service port adapter
- It is an accessory for the OTC 6521 Leak Tamer Plus EVAP Smoke Diagnostic Machine
- Item Package Dimension: 8.77L x 4.21W x 0.62H inches
- Item Package Weight - 0.05 Pounds
- Item Package Quantity - 1
- Remove A/C and fuel line quick disconnect fitting from hard-to-reach areas
- Six sizes 5/16" 3/8" 1/2" 5/8" 3/4" and 7/8"
- Available to work on many import and domestic vehicles
How Do You Buy The Best Otc 4122A?
Do you get stressed out thinking about shopping for a great Otc 4122A? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Otc 4122A, which is why we have assembled a comprehensive list of the greatest Otc 4122A available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Otc 4122A that you consider buying. Your questions might include the following:
- Is it worth buying an Otc 4122A?
- What benefits are there with buying an Otc 4122A?
- What factors deserve consideration when shopping for an effective Otc 4122A?
- Why is it crucial to invest in any Otc 4122A, much less the best one?
- Which Otc 4122A are good in the current market?
- Where can you find information like this about Otc 4122A?
We’re convinced that you likely have far more questions than just these regarding Otc 4122A, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Otc 4122A, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Otc 4122A. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Otc 4122A buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Otc 4122A currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Otc 4122A has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Otc 4122A?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Otc 4122A.
- Customer Ratings: Number ratings grade Otc 4122A objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Otc 4122A.
- Product Quality: You don’t always get what you pay for with an Otc 4122A, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Otc 4122A is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Otc 4122A information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Otc 4122A is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.