18 Best Totalboat Polyester Fairing Compound of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Totalboat Polyester Fairing Compound of 2022. Check our ranking below.

2,260 Reviews Scanned

Rank No. #1

TotalBoat - 512949 Polyester Fairing Compound (Quart Kit)

PREMIUM MARINE-GRADE 2-part polyester fiberglass filler and fairing compound for cosmetic repairs on gelcoat, fiberglass and other composite surfaces above the waterline; fill pinholes, print-through, spider cracks, sanding marks & other surface defects
VERSATILE FIBERGLASS FAIRING COMPOUND has multiple uses, including repairing fiberglass parts & molds, and quick cosmetic repairs to fiberglass decks and hulls
EASY TO APPLY by trowel or spreader; buttery consistency spreads smoothly to a feathered edge, and won't sag on vertical surfaces; ideal as a finishing putty over high-strength TotalBoat Polyester Structural Repair Putty
CURES FAST, EASY TO SAND: Fast-setting fairing filler cures in just 20-30 minutes at 77°F, with minimal shrinkage and no pinholes; easy to sand smooth in preparation for gelcoat or primer and paint
AVAILABLE IN 2 SIZES: QUART KIT AND GALLON KIT: Each includes MEKP catalyst; At 77°F, add 14-16 drops of MEKP to one ounce of TotalBoat Polyester Fairing Compound for a working time of 10-15 minutes, with a cure time of roughly 20-30 minutes

Rank No. #2

TotalBoat-434282 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Pint Kit)

HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair

Rank No. #3

TotalBoat-14409 Marine Gelcoat for Boat Building, Repair and Composite Coatings (White, Quart with Wax)

Premium Marine-Grade Polyester Gelcoat: More Durable Than Standard Orthophthalic Gelcoat, This Is The Smart Choice For Cosmetic Gelcoat Repair, Hull Coatings, Boat Building, Layups And Exterior Coatings For Composite Parts On Boats, Motorcycles, Rvs & More
Ideal For Cosmetic Repairs, Easy To Tint With A Polyester Resin Or Gelcoat Coloring Agent To Color Match Your Existing Gelcoat; Tint White Gelcoat To Get Pastel Colors; Tint Neutral Gelcoat For Dark, Bold Colors. Add Colorants Before Adding Mekp Catalyst
Easy One-Step Application Using A Brush, Roller Or Spray Gun: Non-Sagging, High-Viscosity Formula Is Easy To Apply And Has Great Coverage. At 77°F, Pot Life Is 8-12 Minutes. Cured Gelcoat Is Easy To Sand, Buff And Polish To A High-Gloss, Showroom Finish
Choose The Right Gelcoat For Your Project: For Polyester Resin Layups, Use Gelcoat Without Wax As The First Coat Inside A Prepared Layup; As A Final Coat, Use Gelcoat With Wax (The Wax Makes The Gelcoat Dry Tack-Free); If Needed, Thin With Styrene Only

Rank No. #4

TotalBoat - 512952 - Polyester Structural Repair Putty - Marine Grade Long Strand Fiber Fiberglass Reinforced Filler for Boat and Automotive Repair (Gallon Kit)

PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming; great for boat building & repair on fiberglass, wood, metal, polyester laminates & core materials; use above or below waterline
MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity; ideal for bonding decks, stringers & liners to hulls; filleting and bonding bulkheads, and filling screw holes, bolt holes, chips & dents
EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70°F (14 drops of MEKP per ounce of putty); adjust amount of catalyst to control working time; paste-like consistency is easy to spread and won’t sag
FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair; for cosmetic fairing, overcoat Polyester Structural Repair Putty with TotalBoat Polyester Fairing Compound; it sands smooth easily & can be finished with TotalBoat Gelcoat with wax
AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many home, auto, construction, and aerospace applications, with no shrinking or cracking, even in bulk fillings

Rank No. #5

MarineCoat One Premium Polyester Fairing Compound (Quart)

FAIRING COMPOUND: For remarkable surface curing and repairing, use our Marine polyester FAIRING COMPOUND with hardener to provide you with a smooth surface that you can't get using any other filler
WATERPROOF HIGH-QUALITY: Our COMPOUND includes a hardener and is manufactured using the finest materials and offers you exclusive surface repairing solutions for uneven surfaces
REFINED SURFACE: This premium polyester FAIRING COMPOUND is specially made to even and smoothen your surfaces, providing excellent adhesion, putty to work, sand, and glaze, and minimal shrinkage and pinhole
RAPID ACTION: This fairing comppound bonds and adheres with composite surfaces and performs quick action, offering epoxy fast cure in 3 to 5 minutes
Veteran Owned

Rank No. #6

TotalBoat Flexible Resin Spreaders Set - Reusable Scrapers for Epoxy, Fillers, Putty, Caulk, Spackling Paste, Polyester Resin and Adhesives

MULTI-USE PLASTIC SPREADERS for smooth, precise application of putties, fillers, resins and other liquid and thickened materials used in a variety of boat repair, composite, automotive, home repair, art and woodworking applications
FIRM, FLEXIBLE & DURABLE: Long-lasting scrapers are sturdy, with flexible edges that bend without breaking or cracking
EASY TO CLEAN & REUSABLE: When you're done using the spreader, just bend it and any dried material will peel off easily so you can reuse many times
VERSATILE SET INCLUDES 3 SPREADERS: V-NOTCHED EDGE spreads thickened adhesives and fillers at a consistent depth over large areas; STRAIGHT EDGE for even spreading, smoothing filler flush to the surface, saturating fiberglass with resin, and removing air bubbles from GRP layups; CURVED EDGE for making smooth fillets and fairing curves

Rank No. #7

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood, White, 1 Quarts (Pack of 1)

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly

Rank No. #8

TotalBoat 5:1 Epoxy Resin Kit (Gallon, Slow Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

Premium Epoxy Kits Include Enough 5:1 Marine Epoxy Resin And Hardener To Complete A Variety Of Boat Building, Composite Construction, And Epoxy Repair Projects. For Use On Wood, Fiberglass, Reinforcement Fabrics, Etched Aluminum, Bare Steel, And Lead. Not Suitable For Clear-Coating Applications
Ideal Viscosity For Wetting Out Fiberglass Cloth And Other Reinforcement Fabrics. Self-Leveling Properties Are Ideal For Coating And Laminating. Combine With Fillers To Make A High-Strength Fairing Compound, Filleting Material, Or Adhesive
Choose Fast Or Slow Hardener: Pot Life Ranges From 12 Minutes @ 75°F For Fast Hardener, To 20 Minutes @ 75°F For Slow Hardener
Choose From Three Epoxy Kit Sizes: Quart, Gallon, And 4.5 Gallon, With Your Choice Of Totalboat 5:1 Fast Or Slow Hardener. Kits Include Resin, Hardener, Calibrated Pumps, Mixing Sticks And Mixing Cups. Compatible With Other 5:1 Epoxy Resin Systems

Rank No. #9

Fas-Fair #26 Epoxy Fairing Compound Quart Kit

A light weight compound for fairing surfaces of fiberglass, metal, wood, foam, masonry, and most plastics.
Easy to mix 1 to1 mix ratio - just mix the white and red components until there is no streaks. Creamy smooth consistency makes it easy to spread and feather to a fine edge; will not sag on vertical and overhead surfaces
Cures Fast. Easy to sand Quick-drying compound is ready to sand in 3 hours at 76°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints

Rank No. #10

TotalBoat Polyester Finishing Resin (Quart)

MARINE GRADE FINISHING RESIN contains wax so it dries to a tack-free surface ready for sanding, paint, or gel coat application. Used in fiberglass layups as the final coat over sticky polyester laminating resin
EASY TO USE, PREFERRED BY PROS FOR BUILDING AND REPAIRS: Medium viscosity resin spreads evenly, wets out fiberglass easily, won't sag on vertical surfaces & prevents patter print-through on gelcoat. Ideal for boat building, repairs, and surfboards
VERSATILE POLYESTER RESIN is easy is to mix with MEKP catalyst and apply by brush or plastic spreader to prepared fiberglass, wood, metal, and composites
DURABLE, HARD FINISH resists scratches and staining. For a glossy appearance, the cured surface can be wet sanded and buffed to a high shine
CHOOSE QUART OR GALLON SIZE. Includes MEKP hardener. NOTE: You can even tint polyester fiberglass resin with opaque Pigment Dispersions. If tinting, mix pigment in thoroughly before adding MEKP

Rank No. #11

System Three QuikFair Epoxy Fairing Putty, 3 Quart Kit

Premium Epoxy: QuikFair is a lightweight, microballoon-filled, fast-curing 2-part epoxy fairing putty engineered to provide excellent moisture resistance
Easy To Apply: This epoxy putty boasts a non-sagging, butter-like consistency that makes it easy to measure by weight or volume; The 2 color-coded parts can easily be mixed to form a 3rd color
Versatile Application: Our marine-grade epoxy can be used on both fiberglass and wood-epoxy boats above or below the waterline
Fast Curing: At 70ºF, our fiberglass and wood epoxy is sufficiently cured to sand exceptionally well within 4-6 hours; Meaning you can apply 3 coats each 24 hours in a standard 8-hour shift or 6 on a round-the-clock basis
For Best Results: Apply at 50ºF or above and always sand QuikFair marine epoxy before applying additional coats of putty, resin, or other coatings/finishes to ensure good adhesion

Rank No. #12

TotalBoat 5:1 Epoxy Resin (5 Gallons)

Traditional 5:1 low-viscosity marine epoxy resin cures to a high-strength solid ideal for laminating, bonding, coating, reinforcing, and fairing applications
Bonds strongly with wood, fiberglass, metals, and reinforcement fabrics. Add fillers for an excellent fairing or filleting compound, or stronger adhesive
Wets out fiberglass and other composite fabrics easily, and cures in a wide temperature range, with minimal shrinkage
Use with TotalBoat 5:1 Fast, 5:1 Slow, Tropical Extra Slow, and Crystal Clear Hardeners
Available in Quart, Gallon, and 5-Gallon sizes. Resin ONLY, all hardeners sold separately. Compatible with other 5 to 1 epoxy systems.

SaleRank No. #13

Evercoat Fibre Glass 100572 Formula 27-1/2 Pint Can

Filler Water resistant For permanent of fiberglass,
Wood, metal, cement, stucco and drywall Finest quality, extra-white
Plastic filler for filling dents, scrapes and
For permanent repairs of fiberglass, wood, metal, cement, stucco and drywall

Rank No. #14

Fasco Epoxies White Glass Microspheres - Filler for Epoxy and Polyester Resin - Quart Tub

Sands Easy Added to epoxy or polyester to make a lightweight fairing compound
Also Called Glass Bubbles
Microspheres Improves the Weight to Strength Ratio Improves Dimensional Stability
When added with our cabosil (equal parts by volume) it makes a great general purpose putty
engineered hollow glass microspheres

Rank No. #15

TotalBoat Polyester Laminating Resin - Marine Grade Fiberglass Resin and MEKP Catalyst for Layups and Repairs (Gallon)

GENERAL PURPOSE POLYESTER RESIN stays tacky to hold fiberglass cloth and composite fabrics in place during boat building & layups; ideal for hull & surfboard repair, bathtub & automotive fiberglass repairs
FAST WET OUT OF FIBERGLASS and other reinforcement fabrics used to create composites and FRP parts for yachts, boats, motorcycles and more; ideal for spray-ups and hand layups on fiberglass, wood & metal
EASY TO USE, NO SANDING: Polyester fiberglass resin is an excellent base coat for laminating applications; just mix in MEKP catalyst and use immediately; surface stays tacky so next layer adheres strongly
INCLUDES MEKP CATALYST: Adjust the amount of MEKP hardener to control gel time; slow gel (20 min +): 1 teaspoon of MEKP per quart of resin; medium (15-20 min): 2 tsp/qt; fast (10 min): 3 tsp/qt
CHOOSE QUART OR GALLON SIZE. Note: Resin and work area should be between 70°F to 95°F; store in temperatures below 77°F; for the final layer in your layup, use TotalBoat Polyester Finishing Resin

Rank No. #16

TotalBoat - 512884 Fixwood | Marine Grade Epoxy Putty | Stainable Paste Filler for Damaged Wood Repair or Replacement (2-Pint Kit), white

MAKE REPAIRS THAT LAST: Marine grade 2 part epoxy putty lets you make permanent repairs to rotted, missing, or damaged wood, including soft wood, dry rot & other damage
EASY TO USE: Just mix in equal parts and apply. Can be molded to any shape, and stays in place on vertical surfaces. Will not sag, shrink or crack. For interior & exterior use
WIDE RANGE OF USES: Repair wood stairs, doors, garage door frames, stair posts, exterior walls, fascia boards, rafters, window sills, shutters, door frames, door hinges, wood ladders, split wood, deck boards, and other damage
ACTS LIKE WOOD: Cured putty can be sanded, carved, drilled, cut, painted, or stained to blend easily with the surrounding wood species. High-strength repairs can also be fastened with nails and screws
WATERPROOF: 100% waterproof once cured. For deep rot, use TotalBoat Penetrating Epoxy to consolidate wood first. Sizes: 2-Pint and 2-Quart Kit. Each kit contains equal parts Part A (resin) and Part B (hardener)

Rank No. #17

TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Sea Foam), 1 Gallon (Pack of 1)

DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant finish with maximum color and gloss retention
EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method); can also be applied by spraying; for use above the waterline
SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean; will not fade, crack, or peel; easy to touch up; ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim
VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces; not for continuous submersion on boat bottoms that remain in the water longer than 72 hours
CHOOSE FROM 22 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals)

Rank No. #18

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Gallon, Traditional)

WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes
PENETRATING WOOD SEALER: An ideal dry rot treatment; this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage
CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB
WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps; Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F)
CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water

How Do You Buy The Best Totalboat Polyester Fairing Compound?

Do you get stressed out thinking about shopping for a great Totalboat Polyester Fairing Compound? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Totalboat Polyester Fairing Compound, which is why we have assembled a comprehensive list of the greatest Totalboat Polyester Fairing Compound available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Totalboat Polyester Fairing Compound that you consider buying. Your questions might include the following:

Is it worth buying an Totalboat Polyester Fairing Compound?
What benefits are there with buying an Totalboat Polyester Fairing Compound?
What factors deserve consideration when shopping for an effective Totalboat Polyester Fairing Compound?
Why is it crucial to invest in any Totalboat Polyester Fairing Compound, much less the best one?
Which Totalboat Polyester Fairing Compound are good in the current market?
Where can you find information like this about Totalboat Polyester Fairing Compound?

We’re convinced that you likely have far more questions than just these regarding Totalboat Polyester Fairing Compound, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Totalboat Polyester Fairing Compound, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Totalboat Polyester Fairing Compound. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Totalboat Polyester Fairing Compound buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Totalboat Polyester Fairing Compound currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Totalboat Polyester Fairing Compound has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Totalboat Polyester Fairing Compound?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Totalboat Polyester Fairing Compound.
Customer Ratings: Number ratings grade Totalboat Polyester Fairing Compound objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Totalboat Polyester Fairing Compound.
Product Quality: You don’t always get what you pay for with an Totalboat Polyester Fairing Compound, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Totalboat Polyester Fairing Compound is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Totalboat Polyester Fairing Compound information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Totalboat Polyester Fairing Compound is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best Totalboat Polyester Fairing Compound of 2022 – Romance University

How Do You Buy The Best Totalboat Polyester Fairing Compound?

Related Post: