18 Best Totalboat Polyester Resin of 2022 – Romance University

After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Totalboat Polyester Resin of 2022. Check our ranking below.

2,286 Reviews Scanned

SaleRank No. #1

TotalBoat Polyester Laminating Resin - Marine Grade Fiberglass Resin and MEKP Catalyst for Layups and Repairs (Gallon)

GENERAL PURPOSE POLYESTER RESIN stays tacky to hold fiberglass cloth and composite fabrics in place during boat building & layups; ideal for hull & surfboard repair, bathtub & automotive fiberglass repairs
FAST WET OUT OF FIBERGLASS and other reinforcement fabrics used to create composites and FRP parts for yachts, boats, motorcycles and more; ideal for spray-ups and hand layups on fiberglass, wood & metal
EASY TO USE, NO SANDING: Polyester fiberglass resin is an excellent base coat for laminating applications; just mix in MEKP catalyst and use immediately; surface stays tacky so next layer adheres strongly
INCLUDES MEKP CATALYST: Adjust the amount of MEKP hardener to control gel time; slow gel (20 min +): 1 teaspoon of MEKP per quart of resin; medium (15-20 min): 2 tsp/qt; fast (10 min): 3 tsp/qt
CHOOSE QUART OR GALLON SIZE. Note: Resin and work area should be between 70°F to 95°F; store in temperatures below 77°F; for the final layer in your layup, use TotalBoat Polyester Finishing Resin

SaleRank No. #2

TotalBoat Polyester Finishing Resin (Gallon)

MARINE GRADE FINISHING RESIN contains wax so it dries to a tack-free surface ready for sanding, paint, or gel coat application. Used in fiberglass layups as the final coat over sticky polyester laminating resin
EASY TO USE, PREFERRED BY PROS FOR BUILDING AND REPAIRS: Medium viscosity resin spreads evenly, wets out fiberglass easily, won't sag on vertical surfaces & prevents patter print-through on gelcoat. Ideal for boat building, repairs, and surfboards
VERSATILE POLYESTER RESIN is easy is to mix with MEKP catalyst and apply by brush or plastic spreader to prepared fiberglass, wood, metal, and composites
DURABLE, HARD FINISH resists scratches and staining. For a glossy appearance, the cured surface can be wet sanded and buffed to a high shine
CHOOSE QUART OR GALLON SIZE. Includes MEKP hardener. NOTE: You can even tint polyester fiberglass resin with opaque Pigment Dispersions. If tinting, mix pigment in thoroughly before adding MEKP

SaleRank No. #3

TotalBoat Polyester Structural Repair Putty - Marine Grade Long Strand Fiber Fiberglass Reinforced Filler for Boat and Automotive Repair (Quart Kit)

PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming; great for boat building & repair on fiberglass, wood, metal, polyester laminates & core materials; use above or below waterline
MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity; ideal for bonding decks, stringers & liners to hulls; filleting and bonding bulkheads, and filling screw holes, bolt holes, chips & dents
EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70°F (14 drops of MEKP per ounce of putty); adjust amount of catalyst to control working time; paste-like consistency is easy to spread and won’t sag
FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair; for cosmetic fairing, overcoat Polyester Structural Repair Putty with TotalBoat Polyester Fairing Compound; it sands smooth easily & can be finished with TotalBoat Gelcoat with wax
AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many home, auto, construction, and aerospace applications, with no shrinking or cracking, even in bulk fillings

Rank No. #4

TotalBoat Polyester Laminating Resin - Marine Grade Fiberglass Resin and MEKP Catalyst for Layups and Repairs (2-Gallon)

GENERAL PURPOSE POLYESTER RESIN stays tacky to hold fiberglass cloth and composite fabrics in place during boat building & layups; ideal for hull & surfboard repair, bathtub & automotive fiberglass repairs
FAST WET OUT OF FIBERGLASS and other reinforcement fabrics used to create composites and FRP parts for yachts, boats, motorcycles and more; ideal for spray-ups and hand layups on fiberglass, wood & metal
EASY TO USE, NO SANDING: Polyester fiberglass resin is an excellent base coat for laminating applications; just mix in MEKP catalyst and use immediately; surface stays tacky so next layer adheres strongly
INCLUDES MEKP CATALYST: Adjust the amount of MEKP hardener to control gel time; slow gel (20 min +): 1 teaspoon of MEKP per quart of resin; medium (15-20 min): 2 tsp/qt; fast (10 min): 3 tsp/qt
CHOOSE QUART OR GALLON SIZE. Note: Resin and work area should be between 70°F to 95°F; store in temperatures below 77°F; for the final layer in your layup, use TotalBoat Polyester Finishing Resin

Rank No. #5

TotalBoat 5:1 Marine Epoxy Resin Kit for Bonding, Filleting, Coating, and Laminating - Use for Fiberglass, Wood, Carbon Fiber, Boat Building, Repairs, Woodworking (Gallon, Fast Hardener, Pumps)

High-Strength Marine Epoxy Resin Kits: System formulated for bonding, coating, and laminating. Build, repair, and restore boats, canoes, kayaks, SUPs, surfboards, RVs, and trailers. Stronger bonds and more durable than polyester fiberglass resin.
Ideal for Building and Repair Projects: TotalBoat marine epoxy bonds to wood, steel, lead, etched aluminum, fiberglass, carbon fiber, and other composites. Mixed viscosity and self-leveling properties ideal for wetting out fiberglass cloth.
Complete Epoxy Resin and Hardener Kit: Quart, gallon, and 4.5-gallon epoxy kits include resin, slow or fast hardener, and pumps. At 75°F, pot life is 20 minutes for slow hardener, and 12 min for fast. Color-coded pumps dispense 5:1 mix ratio by volume.
Compatible with Fillers: Use thickeners and additives to create epoxy fairing compound, filleting material, or gap-filling adhesives for boat building and repairs, carpentry, and woodworking projects. Compatible with other 5:1 epoxy resin systems.
Marine-Grade Formula: TotalBoat Traditional epoxy cures to a high-strength solid that can be sanded, shaped, and painted over. Resists chemicals, moisture, salt, and weather for long-lasting structural repairs. Not intended for clear coating.

Rank No. #6

TotalBoat - 512949 Polyester Fairing Compound (Quart Kit)

PREMIUM MARINE-GRADE 2-part polyester fiberglass filler and fairing compound for cosmetic repairs on gelcoat, fiberglass and other composite surfaces above the waterline; fill pinholes, print-through, spider cracks, sanding marks & other surface defects
VERSATILE FIBERGLASS FAIRING COMPOUND has multiple uses, including repairing fiberglass parts & molds, and quick cosmetic repairs to fiberglass decks and hulls
EASY TO APPLY by trowel or spreader; buttery consistency spreads smoothly to a feathered edge, and won't sag on vertical surfaces; ideal as a finishing putty over high-strength TotalBoat Polyester Structural Repair Putty
CURES FAST, EASY TO SAND: Fast-setting fairing filler cures in just 20-30 minutes at 77°F, with minimal shrinkage and no pinholes; easy to sand smooth in preparation for gelcoat or primer and paint
AVAILABLE IN 2 SIZES: QUART KIT AND GALLON KIT: Each includes MEKP catalyst; At 77°F, add 14-16 drops of MEKP to one ounce of TotalBoat Polyester Fairing Compound for a working time of 10-15 minutes, with a cure time of roughly 20-30 minutes

Rank No. #7

TotalBoat Pigment Dispersion Kit for Tinting Epoxy, Polyester Resin and Gelcoat

TINTING AGENTS FOR A VARIETY OF RESINS: Opaque, thin paste pigments for coloring epoxy resin, polyester resin, and gelcoat products
VIBRANT COLORS blend easily into epoxy and polyester resins, and won't fade or discolor
VERSATILE PIGMENTS are ideal for a variety of marine, woodworking and craft uses. Ideal for color matching gelcoat, tinting epoxy for river tables, wall art, jewelry, and more
MIX COLORS EASILY to get just the right custom color for your project
KIT INCLUDES NINE 2 OZ. JARS. COLORS: Red, Yellow, Phthalo Blue, Green, Orange, Brown, Black, White, Gray

Rank No. #8

TotalBoat Flexible Resin Spreaders Set - Reusable Scrapers for Epoxy, Fillers, Putty, Caulk, Spackling Paste, Polyester Resin and Adhesives

MULTI-USE PLASTIC SPREADERS for smooth, precise application of putties, fillers, resins and other liquid and thickened materials used in a variety of boat repair, composite, automotive, home repair, art and woodworking applications
FIRM, FLEXIBLE & DURABLE: Long-lasting scrapers are sturdy, with flexible edges that bend without breaking or cracking
EASY TO CLEAN & REUSABLE: When you're done using the spreader, just bend it and any dried material will peel off easily so you can reuse many times
VERSATILE SET INCLUDES 3 SPREADERS: V-NOTCHED EDGE spreads thickened adhesives and fillers at a consistent depth over large areas; STRAIGHT EDGE for even spreading, smoothing filler flush to the surface, saturating fiberglass with resin, and removing air bubbles from GRP layups; CURVED EDGE for making smooth fillets and fairing curves

Rank No. #9

TotalBoat Table Top Epoxy Resin Kit - 1 Gallon Crystal Clear Epoxy with High Gloss & UV-Resistance - Easy 1:1 Ratio for Bar and Table Coating, Woodworking, and Resin Art Casting

Crystal Clear Epoxy Resin: Loved by beginners and pros, our high-gloss epoxy achieves brilliant results every time. The self-leveling formula makes it easy to coat table tops, furniture, and tumblers, or cast coasters, jewelry, and other molds.
1:1 Ratio for Easy Mixing: Mix 1 part resin to 1 part hardener for a perfect cure. Stir thoroughly, add epoxy colorants, then pour up to 1/4" deep on your surface or up to 1" in a mold. The 2-part epoxy will self-level & cure at room temperature.
Durable Epoxy Finish is UV Resistant and Waterproof: TotalBoat epoxy resin creates a smooth finish strong enough to resist heat, moisture, scratches, and yellowing. BPA-free formula safer for your home, bar, restaurant, on countertops & more.
Use TotalBoat Epoxy for Creative Projects, Large or Small: Coat, cast, or build layers across various applications, including bar tops, counters, flower preservation, home decor, artwork, river tables & table tops, serving trays, and woodworking.
1 Gallon Epoxy Resin Kit: Includes 1/2 gallon resin and 1/2 gallon hardener, covering 12.8 sq ft at 1/8" thick. Apply epoxy in 70-80°F spaces within 40 minutes of mixing. Add layers after 4-8 hours; full cure in 16-20 hours. Store at 60-90°F.

SaleRank No. #10

TotalBoat Table Top Epoxy Resin Kit - 2 Gallon Crystal Clear Epoxy with High Gloss & UV-Resistance - Easy 1:1 Ratio for Bar and Table Coating, Woodworking, and Resin Art Casting

Crystal Clear Epoxy Resin: Loved by beginners and pros, our high-gloss epoxy achieves brilliant results every time. The self-leveling formula makes it easy to coat table tops, furniture, and tumblers, or cast coasters, & jewelry.
1:1 Ratio for Easy Mixing: Mix 1 part resin to 1 part hardener for a perfect cure. Stir thoroughly, add epoxy colorants, then pour up to 1/4" deep. The 2-part epoxy will self-level & cure at room temperature
Durable Epoxy Finish is Impact Resistant and Waterproof: TotalBoat epoxy resin creates a glossy, smooth finish strong enough to resist heat, moisture, scratches, and shock. BPA-free formula safer for your home, bar, restaurant, on countertops & more
Use TotalBoat Epoxy for Creative Projects, Large or Small: Coat, cast, or build layers across various applications, including bar tops, counters, flower preservation, home decor, artwork, river tables & table tops, serving trays, and woodworking
2 Gallon Epoxy Resin Kit: Includes 1 gallon resin and 1 gallon hardener, covering 12.8 sq ft per gallon at 1/8" thick. Apply epoxy in 70-80°F spaces within 20 minutes of mixing. Add layers after 4-8 hours; full cure in 16-20 hours. Store at 60-90°F

Rank No. #11

TotalBoat Fiberglass Milled Glass Fibers Additive Filler for Epoxy, Polyester, and Vinylester Resin (5 Quart)

Milled Glass Fibers are finely ground, short strands of fiberglass that are blended into epoxy resin, polyester resin, or vinylester resin to improve strength
This powder additive is most commonly used in structural epoxy filleting putties and lay ups, to increase tensile strength, dimensional stability, and impact strength, while minimizing shrinkage
Ideal for boat repair, boat building, auto body work and other fiberglass repairs including fillets, filling gaps or voids, and bonding. Epoxy thickened with Milled Glass Fibers won’t crack
Combine this versatile filler with TotalBoat epoxy and Glass Micro Balloons or Silica Thickener for easy sanding and additional strength. Availabe in Quart and 5 Quart sizes
Always wear proper safety protection when working with epoxy and fillers. Be sure to wash your hands and exposed skin after use

SaleRank No. #12

Wax Additive - 4 oz Surfacing Agent for use with Gelcoat and Polyester resins

Use 4 oz of surfacing agent per gallon
When added to non-waxed gelcoat or polyester it will make it dry tack-free
Make sure to mix well as this continues to separate once added to your product.

Rank No. #13

TotalBoat Fiberglass Micro Balloons - White Glass Microspheres Filler for Epoxy Resin and Polyester Resin (5 Quart)

Micro Balloons are microscopic sodium borosilicate hollow glass spheres added to epoxy and polyester resin to thicken without adding weight
Add this economical, low-density filler to epoxy or polyester resin to create a lightweight fairing compound that’s easy to sand or shape
Combine this versatile additive with TotalBoat epoxy and Silica Thickener to prevent sagging on vertical or overhead surfaces. Availabe in Quart and 5 Quart sizes
Always wear proper safety protection when working with epoxy and fillers. Be sure to wash your hands and exposed skin after use

SaleRank No. #14

True Composites Fiberglass Resin Polyester Resin Marine Grade Resin 1 Gallon with MEKP Hardener Polymer Resin Fiberglass Repair Kit Laminating Resin for Wood Boat Building and Repair

✅ Grade A - Not your typical boatyard resin, this polyester fiberglass laminating resin is the highest grade you will find—a premium product trusted in the marine industry and by most manufaturers.
✅ Cures Fast - Apply this resin on wood, fiberglass, or metal without any inconvenience. Depending on temperature and humidity, it can reach its cured stage in as little as 4 hours and up to 24 hours.
✅ Dries Tack-Free - Manufactured in the USA, this DCPD-type resin cures tack-free with no wax required. The set includes 2 gallons of resin and 2- 2-ounce bottles of MEKP catalyst.
✅ Multiple Applications - This polyester fiberglass resin is perfect for a variety of uses, including marine laminating, aerospace, FRP parts, auto body repair, transportation, and more.
✅ High Compatibility - Suited for all types of fiberglass and coring materials, this polyester laminating resin is great for low-cost repairs, new construction parts, and vertical surfaces.

Rank No. #15

TotalBoat High Performance Epoxy Kit - Crystal Clear Marine Grade Resin and Hardener for Woodworking, Fiberglass, Wooden Boat Building and Repairs (1.5 Quart, Medium)

EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for clear coating. Simple mix ratio of 2 parts resin to 1 part hardener
NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low VOCs make it great for shop or indoor use. Cured surface is BPA-free, safer for potential food contact
CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium Hardener is ideal for most applications. Fast Hardener has the shortest working time and fastest cure
CHOOSE EPOXY KIT SIZE: 1.5 Pint, 1.5 Quart, 1.5 Gallon or 3 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps. Compatible with epoxy thickeners, fillers and coloring agents
PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time; easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin

Rank No. #16

TotalBoat ThickSet Deep Pour Epoxy Resin Kit (1.3 Gallon) - Crystal Clear Thick Pour Resin for Art, Casting, Epoxy River Tables, Live Edge Slabs, Molds, Wood

DEEP POUR EPOXY RESIN AND HARDENER KITS for river tables, live-edge slabs, casting, deep resin molds, art, embedding, encapsulating and filling deep voids in wood; waterproof resin cures without shrinkage, cracking or yellowing
CRYSTAL CLEAR EPOXY RESIN self-levels to creates a high-gloss, glass-like finish on prepared wood, concrete, stone, ceramic and metal surfaces; great for deep casting and molding projects to create unique sculptures, figurines, jewelry and more
POUR EPOXY UP TO 1" THICK PER SINGLE LAYER: Pour single layers of resin up to 1/2″ thick for larger casting applications such as slab and river table pours, and up to 1" thick for smaller molds; for even deeper pours per layer, try Total Boat ThickSet Fathom (sold separately)
EASY TO USE, EASY TO TINT: Simple mix ratio of 3 parts epoxy resin to 1 part hardener, and long working time make it easy to use; to add interest, tint mixed liquid epoxy with mica powder, universal tints, alcohol ink pigments and other epoxy-safe colorants
LOW VOC, LOW ODOR RESIN IS AVAILABLE IN FOUR SIZES: 1.3 Quart Kit (1 qt resin, 1/3 qt hardener), 1.3 Gallon Kit (1 gal resin, 1/3 gal hardener), 4 Gallon Kit (3 gal resin, 1 gal hardener) and 8 Gallon Kit (6 gal resin, 2 gal hardener); 100% made in the USA

Rank No. #17

TotalBoat Fathom Deep Pour Epoxy Resin 1.5 Gallon Kit - 2-3" Depth Crystal-Clear Low Viscosity UV-Resistant Formula for Bubble-Free Casting, River Tables, Flower Preservation, DIY Crafts, and Wood

Deep Pour Epoxy Resin Kits designed for larger woodworking and artistic projects. Create 2 - 3 inch pours with deep pour resin, letting you craft river tables, preserve flowers, and cast large molds in a single layer for long-lasting beauty.
High-Gloss, Crystal Clear Epoxy: TotalBoat Fathom features brilliant clarity, self-leveling bubble release, and UV resistance to protect and enhance artwork and furniture. Resists heat, moisture scratches, stains, and yellowing.
Low-Viscosity, Tintable Formula: Easy to mix and pour, this clear deep pour resin is perfect for creating stunning floral displays. Get creative with alcohol inks, pigments, or mica powder to create custom furniture, dioramas, and sculptures.
Extended Work & Cure Times for Great Results: This deep-pour casting resin has a simple 2:1 mix ratio with an impressive 4-6 hour working time to embed objects and make adjustments. Slow cure rate prevents shrinkage and cracking for smooth surfaces.
DIY Friendly Kits with Professional Results: For a consistent cure, maintain 65-80°F in your workspace. This deep pour epoxy is ready to demold in 48-72 hours. Allow for full cure (5-7 days) before turning or sanding.

SaleRank No. #18

Premium Polyester Resin w/Hardener for Laminating Fiberglass mat, biaxle, Cloth (Gallon)

Our polyester resin is a Iso blend resin, this is a perfect no-run, no-sag resin for marine repairs and boat construction.
Iso resin is more flexible and waterproof then your traditional 100% polyester resin.
Good for repairing all boat surfaces. It is mixed with MEKP catalyst to harden.
Used By Pros for Building and Repairs Marine Grade Durable Hard Finish Excellent wet out characteristics 35 min gel time
Comes with Hardener and Small Mek Mixing Cup

How Do You Buy The Best Totalboat Polyester Resin?

Do you get stressed out thinking about shopping for a great Totalboat Polyester Resin? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Totalboat Polyester Resin, which is why we have assembled a comprehensive list of the greatest Totalboat Polyester Resin available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Totalboat Polyester Resin that you consider buying. Your questions might include the following:

Is it worth buying an Totalboat Polyester Resin?
What benefits are there with buying an Totalboat Polyester Resin?
What factors deserve consideration when shopping for an effective Totalboat Polyester Resin?
Why is it crucial to invest in any Totalboat Polyester Resin, much less the best one?
Which Totalboat Polyester Resin are good in the current market?
Where can you find information like this about Totalboat Polyester Resin?

We’re convinced that you likely have far more questions than just these regarding Totalboat Polyester Resin, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Totalboat Polyester Resin, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Totalboat Polyester Resin. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Totalboat Polyester Resin buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Totalboat Polyester Resin currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Totalboat Polyester Resin has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Totalboat Polyester Resin?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Totalboat Polyester Resin.
Customer Ratings: Number ratings grade Totalboat Polyester Resin objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Totalboat Polyester Resin.
Product Quality: You don’t always get what you pay for with an Totalboat Polyester Resin, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Totalboat Polyester Resin is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Totalboat Polyester Resin information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Totalboat Polyester Resin is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

18 Best Totalboat Polyester Resin of 2022 – Romance University

How Do You Buy The Best Totalboat Polyester Resin?

Related Post: