18 Best Totalboat Totalfair Epoxy Fairing Compound of 2022 – Romance University
After hours researching and comparing all models on the market, Romance University finds out Top 18 Best Totalboat Totalfair Epoxy Fairing Compound of 2022. Check our ranking below.
2,386 Reviews Scanned
Rank No. #1
TotalBoat-434282 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Pint Kit)
- HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
- SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
- EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
- CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
- CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair
Rank No. #2
TotalBoat Polyester Fairing Compound (Gallon Kit)
- PREMIUM MARINE-GRADE 2-part polyester fiberglass filler and fairing compound for cosmetic repairs on gelcoat, fiberglass and other composite surfaces above the waterline; fill pinholes, print-through, spider cracks, sanding marks & other surface defects
- VERSATILE FIBERGLASS FAIRING COMPOUND has multiple uses, including repairing fiberglass parts & molds, and quick cosmetic repairs to fiberglass decks and hulls
- EASY TO APPLY by trowel or spreader; buttery consistency spreads smoothly to a feathered edge, and won't sag on vertical surfaces; ideal as a finishing putty over high-strength TotalBoat Polyester Structural Repair Putty
- CURES FAST, EASY TO SAND: Fast-setting fairing filler cures in just 20-30 minutes at 77°F, with minimal shrinkage and no pinholes; easy to sand smooth in preparation for gelcoat or primer and paint
- AVAILABLE IN 2 SIZES: QUART KIT AND GALLON KIT: Each includes MEKP catalyst; At 77°F, add 14-16 drops of MEKP to one ounce of TotalBoat Polyester Fairing Compound for a working time of 10-15 minutes, with a cure time of roughly 20-30 minutes
Rank No. #3
Fasco Epoxies Inc. Fas-Fair #26 Epoxy Fairing Compound Gallon Kit
- A light weight compound for fairing surfaces of fiberglass, metal, wood, foam, masonry, and most plastics.
- Easy to mix 1 to1 mix ratio - just mix the white and red components until there is no streaks. Creamy smooth consistency makes it easy to spread and feather to a fine edge; will not sag on vertical and overhead surfaces
- Cures Fast. Easy to sand Quick-drying compound is ready to sand in 3 hours at 76°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
Rank No. #4
TotalBoat - 512952 - Polyester Structural Repair Putty - Marine Grade Long Strand Fiber Fiberglass Reinforced Filler for Boat and Automotive Repair (Gallon Kit)
- PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming; great for boat building & repair on fiberglass, wood, metal, polyester laminates & core materials; use above or below waterline
- MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity; ideal for bonding decks, stringers & liners to hulls; filleting and bonding bulkheads, and filling screw holes, bolt holes, chips & dents
- EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70°F (14 drops of MEKP per ounce of putty); adjust amount of catalyst to control working time; paste-like consistency is easy to spread and won’t sag
- FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair; for cosmetic fairing, overcoat Polyester Structural Repair Putty with TotalBoat Polyester Fairing Compound; it sands smooth easily & can be finished with TotalBoat Gelcoat with wax
- AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many home, auto, construction, and aerospace applications, with no shrinking or cracking, even in bulk fillings
Rank No. #5
Fasco Epoxies Fas-Fair #26 Epoxy Fairing Compound Quart Kit
- A light weight compound for fairing surfaces of fiberglass, metal, wood, foam, masonry, and most plastics.
- Easy to mix 1 to1 mix ratio - just mix the white and red components until there is no streaks. Creamy smooth consistency makes it easy to spread and feather to a fine edge; will not sag on vertical and overhead surfaces
- Cures Fast. Easy to sand Quick-drying compound is ready to sand in 3 hours at 76°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
Rank No. #6
TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood, White, 1 Quarts (Pack of 1)
- ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
- COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
- EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
- DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
- AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly
Rank No. #7
System Three QuikFair Epoxy Fairing Putty, 3 Quart Kit
- Premium Epoxy: QuikFair is a lightweight, microballoon-filled, fast-curing 2-part epoxy fairing putty engineered to provide excellent moisture resistance
- Easy To Apply: This epoxy putty boasts a non-sagging, butter-like consistency that makes it easy to measure by weight or volume; The 2 color-coded parts can easily be mixed to form a 3rd color
- Versatile Application: Our marine-grade epoxy can be used on both fiberglass and wood-epoxy boats above or below the waterline
- Fast Curing: At 70ºF, our fiberglass and wood epoxy is sufficiently cured to sand exceptionally well within 4-6 hours; Meaning you can apply 3 coats each 24 hours in a standard 8-hour shift or 6 on a round-the-clock basis
- For Best Results: Apply at 50ºF or above and always sand QuikFair marine epoxy before applying additional coats of putty, resin, or other coatings/finishes to ensure good adhesion
SaleRank No. #8
TotalBoat-14409 Marine Gelcoat for Boat Building, Repair and Composite Coatings (White, Quart with Wax)
- Premium Marine-Grade Polyester Gelcoat: More Durable Than Standard Orthophthalic Gelcoat, This Is The Smart Choice For Cosmetic Gelcoat Repair, Hull Coatings, Boat Building, Layups And Exterior Coatings For Composite Parts On Boats, Motorcycles, Rvs & More
- Ideal For Cosmetic Repairs, Easy To Tint With A Polyester Resin Or Gelcoat Coloring Agent To Color Match Your Existing Gelcoat; Tint White Gelcoat To Get Pastel Colors; Tint Neutral Gelcoat For Dark, Bold Colors. Add Colorants Before Adding Mekp Catalyst
- Easy One-Step Application Using A Brush, Roller Or Spray Gun: Non-Sagging, High-Viscosity Formula Is Easy To Apply And Has Great Coverage. At 77°F, Pot Life Is 8-12 Minutes. Cured Gelcoat Is Easy To Sand, Buff And Polish To A High-Gloss, Showroom Finish
- Choose The Right Gelcoat For Your Project: For Polyester Resin Layups, Use Gelcoat Without Wax As The First Coat Inside A Prepared Layup; As A Final Coat, Use Gelcoat With Wax (The Wax Makes The Gelcoat Dry Tack-Free); If Needed, Thin With Styrene Only
SaleRank No. #9
PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1/2lb in Two Cans, Off White 80115
- Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments
- Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber
- Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F
- High-tack paste can be used in vertical and overhead applications
- Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water
Rank No. #10
TotalBoat 5:1 Epoxy Slow Hardener 25 Ounces (for 1 Gallon of Resin)
- Low viscosity epoxy curing agent for use with TotalBoat 5:1 epoxy resin in warmer working environments
- Compatible with all traditional 5 part resin to 1 part hardener marine epoxies
- Combine with resin to create a rigid, high strength solid with excellent bonding and coating properties
- Dispense with TotalBoat 5:1 pumps to ensure correct ratio
- Available in three sizes for quart, gallon, and 5 gallon resin
Rank No. #11
TotalBoat High Performance Fast Hardener (Pint)
- Part 2 of a two-part, low-viscosity epoxy resin system that’s easy to use for clear coating, laminating, layups, and vacuum bagging. Low odor and low VOCs make it great for shop or indoor use. Blush-free formula does not require time-consuming washdowns between coats.
- Provides the shortest working time and fastest cure at room temperature, and can cure overnight in cooler temperatures (minimum 55°F).
- For use with TotalBoat 2:1 High Performance 2:1 Epoxy Resin. Simple 2 parts resin to 1 part hardener mix ratio makes it easy to get a strong, ultra-clear cure every time, especially using TotalBoat 2:1 Pumps (sold separately).
- Blend mixed epoxy resin with fillers to create a strong adhesive, fairing compound, or filleting compound.
- Available in Pint, Half Gallon, and Gallon sizes
Rank No. #12
Total Boat 5:1 Epoxy Resin (Quart), Clear
- Traditional 5:1 low-viscosity marine epoxy resin cures to a high-strength solid ideal for laminating, bonding, coating, reinforcing, and fairing applications
- Bonds strongly with wood, fiberglass, metals, and reinforcement fabrics. Add fillers for an excellent fairing or filleting compound, or stronger adhesive
- Wets out fiberglass and other composite fabrics easily, and cures in a wide temperature range, with minimal shrinkage
- Use with TotalBoat 5:1 Fast, 5:1 Slow, Tropical Extra Slow, and Crystal Clear Hardeners
- Available in Quart, Gallon, and 5-Gallon sizes. Resin ONLY, all hardeners sold separately. Compatible with other 5 to 1 epoxy systems.
SaleRank No. #13
TotalBoat Table Top Epoxy Resin 1 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts
- CLEAR EPOXY RESIN for a high gloss finish on bar tops, table tops & countertops; add pigments, tints or encapsulations to make your piece truly unique; versatile craft resin is also great for coating tumblers and casting coasters & jewelry
- EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass; use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more; 100% waterproof upon cure
- 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface; the epoxy will level on its own and cure at room temperature; maximum pour depth per layer is 1/8" - 1/4"
- NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE; all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured; 100% made in the USA
- 1 GALLON EPOXY KIT includes 1/2 gallon of resin & 1/2 gallon of hardener; application temperature: 70-80°F; working time: 20 min. @ 70°F; recoat time: 4-8 hrs; cure time: 16-20 hrs @ 70°F; coverage: 12.8 sq ft at 1/8" thick; store at 60-90°F
SaleRank No. #14
TotalBoat Table Top Epoxy Resin 2 Gallon Kit - Crystal Clear Coating and Casting Resin for Bar Tops, Table Tops, Wood, Concrete, Epoxy Art & Crafts
- CLEAR EPOXY RESIN for a high gloss finish on bar tops, table tops & countertops; add pigments, tints or encapsulations to make your piece truly unique; versatile craft resin is also great for coating tumblers and casting coasters & jewelry
- EPOXY RESISTS SCRATCHES, STAINS AND YELLOWING: Self-leveling formula cures to a finish as smooth as glass; use this versatile DIY resin on wood, concrete, ceramic, stainless steel and more; 100% waterproof upon cure
- 2 PART EPOXY IS EASY TO USE: Just mix 1 part resin to 1 part hardener, stir thoroughly, and pour on your prepared surface; the epoxy will level on its own and cure at room temperature; maximum pour depth per layer is 1/8" - 1/4"
- NO VOCs, LOW ODOR, BPA-FREE: No harsh fumes - ideal for indoor or shop use with adequate ventilation and proper PPE; all ingredients in this food safe epoxy resin are on the USDA approved list for contact with food, once cured; 100% made in the USA
- 2 GALLON EPOXY KIT includes 1 gallon of resin & 1 gallon of hardener; application temperature: 70-80°F; working time: 20 min. @ 70°F; recoat time: 4-8 hrs; cure time: 16-20 hrs @ 70°F; coverage: 12.8 sq ft per gallon at 1/8" thick; store at 60-90°F
Rank No. #15
TotalBoat 5:1 Epoxy Resin Kit (Gallon, Fast Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair
- PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair projects. For use on wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel, and lead. Not suitable for clear-coating applications
- IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating. Combine with fillers to make a high-strength fairing compound, filleting material, or adhesive
- CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75°F for Fast Hardener, to 20 minutes @ 75°F for Slow Hardener
- CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, and calibrated pumps. Compatible with other 5:1 epoxy resin systems
- PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin
Rank No. #16
True Composites Structural Polyester Bonding Putty - Marine Grade, Fiber Reinforced Filler, Smooth Spreading & Sag Resistant - Ideal for Boat & Automotive Repair on Fiberglass, Wood - Quart Kit
- ✅ 𝐌𝐀𝐗𝐈𝐌𝐔𝐌 𝐒𝐓𝐑𝐄𝐍𝐆𝐓𝐇, 𝐌𝐀𝐗𝐈𝐌𝐔𝐌 𝐕𝐄𝐑𝐒𝐀𝐓𝐈𝐋𝐈𝐓𝐘 - Our STRUCTURAL POLYESTER BONDING PUTTY, with its pre-thickened, fiber-reinforced formula, guarantees top-tier structural bonding. Perfect for boat repair, automotive, and home DIYs, it adheres powerfully to fiberglass, ceramic, wood, metal, and beyond. Trust in a putty bond that lasts!
- ✅ 𝐌𝐀𝐑𝐈𝐍𝐄-𝐆𝐑𝐀𝐃𝐄 𝐏𝐎𝐖𝐄𝐑 𝐅𝐎𝐑 𝐀𝐋𝐋 𝐘𝐎𝐔𝐑 𝐏𝐑𝐎𝐉𝐄𝐂𝐓𝐒 - Dive into the strength of our marine filler, rich in premium polyester resin and robust long-strand glass fibers. Designed for unbeatable impact resistance and flexibility, it's the go-to for bonding decks, patching holes, and mending chips. Turn the toughest jobs into easy wins!
- ✅ 𝐄𝐅𝐅𝐎𝐑𝐓𝐋𝐄𝐒𝐒 𝐌𝐈𝐗, 𝐌𝐀𝐆𝐍𝐈𝐅𝐈𝐂𝐄𝐍𝐓 𝐅𝐈𝐗 - Achieve professional results with ease! Our polyester putty paste-like consistency ensures a smooth, sag-free application, catalyzing quickly with MEKP for a convenient 15-20 min working time at 70°F. ADD TO CART now.
- ✅ 𝐅𝐀𝐒𝐓-𝐓𝐑𝐀𝐂𝐊𝐄𝐃 𝐑𝐄𝐏𝐀𝐈𝐑𝐒, 𝐋𝐀𝐒𝐓𝐈𝐍𝐆 𝐃𝐔𝐑𝐀𝐁𝐈𝐋𝐈𝐓𝐘 - Don't let repairs slow you down. Our fast-setting polyester putty ensures quick fixes with lasting impact resistance and no shrinkage or cracking, perfect for both cosmetic and structural marine repairs. Hello to smooth, durable repairs!
- ✅ 𝐀 𝐒𝐎𝐋𝐔𝐓𝐈𝐎𝐍 𝐅𝐎𝐑 𝐄𝐕𝐄𝐑𝐘 𝐂𝐇𝐀𝐋𝐋𝐄𝐍𝐆𝐄 - Choose from our convenient quart or gallon kits, complete with MEKP. Whether you're tackling home repairs, automotive fixes, or aerospace challenges, our putty bonds diverse materials with ease. Experience no shrinkage, no cracking – just pure bonding brilliance in every application.
Rank No. #17
TotalBoat Epoxy Primer Thinner 200 Marine Solvent (Quart), Clear, 32 Fl Oz (Pack of 1)
- Marine solvent specially formulated for thinning or reducing TotalBoat TotalProtect, TotalBoat Aluminum Boat Barrier Coat, and TotalBoat 2-Part Epoxy Primer systems.
- Perfect for brush, roller, or spray applications
- Ideal surface prep solvent wipe for rubberized inflatable materials prior to applying TotalBoat Inflatable Boat Paint
- Makes it easy to remove paint from tools and equipment after painting is done
- Available in Quart size. 100% made in the USA. Use only with the TotalBoat products specified
SaleRank No. #18
Total Boat 5:1 Epoxy Fast Hardener 6 Ounces (for Quart of Resin), Clear Amber
- Low viscosity epoxy curing agent for use with TotalBoat 5:1 epoxy resin
- Compatible with all traditional 5 part resin to 1 part hardener marine epoxies
- Combine with resin to create a rigid, high strength moisture resistant solid with excellent bonding and coating properties
- Available in three sizes for quart, gallon, and 5 gallon resin.
- Dispense with TotalBoat pumps to ensure correct ratios
How Do You Buy The Best Totalboat Totalfair Epoxy Fairing Compound?
Do you get stressed out thinking about shopping for a great Totalboat Totalfair Epoxy Fairing Compound? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Totalboat Totalfair Epoxy Fairing Compound, which is why we have assembled a comprehensive list of the greatest Totalboat Totalfair Epoxy Fairing Compound available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Totalboat Totalfair Epoxy Fairing Compound that you consider buying. Your questions might include the following:
- Is it worth buying an Totalboat Totalfair Epoxy Fairing Compound?
- What benefits are there with buying an Totalboat Totalfair Epoxy Fairing Compound?
- What factors deserve consideration when shopping for an effective Totalboat Totalfair Epoxy Fairing Compound?
- Why is it crucial to invest in any Totalboat Totalfair Epoxy Fairing Compound, much less the best one?
- Which Totalboat Totalfair Epoxy Fairing Compound are good in the current market?
- Where can you find information like this about Totalboat Totalfair Epoxy Fairing Compound?
We’re convinced that you likely have far more questions than just these regarding Totalboat Totalfair Epoxy Fairing Compound, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Totalboat Totalfair Epoxy Fairing Compound, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Totalboat Totalfair Epoxy Fairing Compound. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Totalboat Totalfair Epoxy Fairing Compound buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Totalboat Totalfair Epoxy Fairing Compound currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Totalboat Totalfair Epoxy Fairing Compound has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Totalboat Totalfair Epoxy Fairing Compound?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Totalboat Totalfair Epoxy Fairing Compound.
- Customer Ratings: Number ratings grade Totalboat Totalfair Epoxy Fairing Compound objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Totalboat Totalfair Epoxy Fairing Compound.
- Product Quality: You don’t always get what you pay for with an Totalboat Totalfair Epoxy Fairing Compound, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Totalboat Totalfair Epoxy Fairing Compound is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Totalboat Totalfair Epoxy Fairing Compound information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Totalboat Totalfair Epoxy Fairing Compound is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.