The Best I2C Bluetooth Module of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best I2C Bluetooth Module of 2023. Check our ranking below.
2,035 Reviews Scanned
- Spectrum range: 2400-2483.5MHz or 5180-5825MHz;Antenna form: onboard PCB antenna or IPEX antenna
- Bluetooth: BT5.0;Bluetooth frequency range: 2.402GHz-2.480GHz
- Support interface: UART/GPIO/ADC/PWM/IIC/SPI/SWD;Size: 24*16*3(± 0.2)mm
- Power supply voltage: 3.0V~3.6V (typical 3.3V);Power supply current:> 450mA
- Working temperature: -20°C~70°C;Storage environment: -40°C~125°C, <90%RH
- Core51822 is a wireless module based on nRF51822
- NRF51822 CORE51822 2.4GHz BT4.0 Wireless Bluetooth
- The Multiprotocol Bluetooth 4.0 low energy/2.4 GHz RF SoC designed for ULP (ultra low power) wirelesss applications.
- Frequency range: 2.4GHz
- This is an I2C hub. For MCU needs to use the I2C interface to connect multiple I2C devices
- 1PCS Female Header,1PCS straight pin header,1PCS XH2.54 interface,1PCS curved pin header
- Bluetooth module HC-05 Master and slave Two in one module. Please note: iOS devices (iPhone) are not supported
- Use the CSR BC417 mainstream bluetooth chip, bluetooth V2.0 SPP protocol standards
- Module working voltage 3.6 V to 6V
- Default rate of 9600,default pin:1234, the user can be set up.click the button into AT MODE
- Can be switched via AT commands as master or slave mode , the device can be connected via AT commands specified
- ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card
- Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard; Wi-Fi: 802.11 b/g/n/e/i; Support Interface: UART, SPI, I2C, PWM; Support TF Card: Maximum support 4G
- Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire
- FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse.
- This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC; Supports OV2640 and OV7670 cameras.
Last update on 2025-07-07 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best I2C Bluetooth Module?
Do you get stressed out thinking about shopping for a great I2C Bluetooth Module? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching I2C Bluetooth Module, which is why we have assembled a comprehensive list of the greatest I2C Bluetooth Module available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for I2C Bluetooth Module that you consider buying. Your questions might include the following:
- Is it worth buying an I2C Bluetooth Module?
- What benefits are there with buying an I2C Bluetooth Module?
- What factors deserve consideration when shopping for an effective I2C Bluetooth Module?
- Why is it crucial to invest in any I2C Bluetooth Module, much less the best one?
- Which I2C Bluetooth Module are good in the current market?
- Where can you find information like this about I2C Bluetooth Module?
We’re convinced that you likely have far more questions than just these regarding I2C Bluetooth Module, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for I2C Bluetooth Module, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible I2C Bluetooth Module. Make sure that you are only using trustworthy and credible websites and sources.
We provide an I2C Bluetooth Module buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available I2C Bluetooth Module currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of I2C Bluetooth Module has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an I2C Bluetooth Module?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your I2C Bluetooth Module.
- Customer Ratings: Number ratings grade I2C Bluetooth Module objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their I2C Bluetooth Module.
- Product Quality: You don’t always get what you pay for with an I2C Bluetooth Module, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an I2C Bluetooth Module is should be an indication of how long it will work out for you.
We always remember that maintaining I2C Bluetooth Module information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding I2C Bluetooth Module is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.