Contents

The Best I2C Touch Screen of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best I2C Touch Screen of 2023. Check our ranking below.

2,373 Reviews Scanned

Rank No. #1

2.9 Zoll e-Paper Touch Display für Raspberry Pi Pico 296×128 E-Ink Touchscreen Anzeigemodul Zweifarbig Schwarz/Weiß 3.3V Unterstützung 5-Punkte-Touch SPI / I2C-Schnittstelle Teilaktualisierung

2.9 inch Touch e-Paper Module for Raspberry Pi Pico, 296×128 resolution, black / white E-Ink display, onboard female pin header for direct attaching to Raspberry Pi Pico
2.9 inch capacitive touch ePaper module support 5-points touch, toughened glass touch panel, user-defined wakeup gesture
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI Communication / I2C Touch Port interface, requires minimal IO pins

Rank No. #2

OWON XDS3204E Digital Oscilloscope 200Mhz DSO 4 Ch 1GS/S 8 BITS LCD with Touch Screen Function,45,000 wfms/s Refresh Rate.40M Record/Standard Touchscreen I2C,SPI,RS232 and CAN decoding Plus

Multi-function mobile tester Oscilloscope + signal generator + multimeter +data logger +frequency counter + decoder. Support Li-on battery to implement floating test.
Leading 45,000 frame/sec waveform refresh rate, muti-level gray scale and color temperature display.
200MHz Bandwidth，1GS/s sample rate

Rank No. #3

DIYmalls 3.0 inch TFT LCD Shield Display Module 3.3V Resistive Touch Screen 400x240 for Arduino, not 5V

This 3.0 inch display is 3.3V, so it can not be directly used with the 5V development board. Otherwise, the 3 inch lcd display will be burned.
It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is easy.
The 3 inch touch screen is very suitable for digital photo frame, oscilloscope, function generator, detection system monitor
The 3 inch TFT lcd is resistive touch, not capacitive touch. Please use the included pen to touch the 3 inch display.
If you have any problem, please do as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".

Rank No. #4

Hosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi(Blue and Yellow)

0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
It compatibles with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
There are no fonts embedded in the OLED controller, users can create fonts through font generation software.

Rank No. #5

Hosyond 2.8 Inches TFT LCD Touch Screen Shield Display Module 320x240 SPI Serial ILI9341 with Touch Pen Compatible with Arduino R3/Mega2560 Development Board

2.8 inches 320x240 pixels RGB colorful display lcd screen.
Support touch screen function, with touch pen inside that you can use it more easily.
Compatible with Arduino R3 controller board,which will improve your project operations.
There is a SD card socket on the back of this screen.
SPI Serial,built-in ILI9341driver IC and power supply IC.

Rank No. #6

waveshare 4inch HDMI Capacitive Touch IPS LCD Display Compatible with Raspberry Pi 4B/3B+/3A+/2B/B+/A+/Zero/Zero W/WH/Zero 2W CM3+/4 720×720 Resolution Supports Jetson Nano/Windows

Provide online user manual, please check the manual carefully before using!
Supports all versions of Raspberry Pi. For Jetson Nano and PC, only USB-C touch is available
4-inch IPS screen, hardware resolution is 720×720. 5-point capacitive touch, tempered glass panel, hardness up to 6H.
When used with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie. Ubuntu is supported when used with Jetson Nano.
When used as a computer monitor, it supports Windows 11/10/8.1/8/7. Onboard dual touch circuit, optional USB Type-C or I2C touch, it has more application scenarios. With 3.5mm audio and speaker interface, it support HDMI audio output.

Rank No. #7

ELEGOO UNO R3 2.8 Inches TFT Touch Screen with SD Card Socket with Technical Data for Arduino UNO R3

Free tutorial in cd, better price, better service. (With technical data)
2. 8 inches colorful display lcd screen
With touch pen inside, you can use it more easily
Not including the uno R3 controller board and usb cable
We have always cared about the customer experience and improve the product function details

Rank No. #8

Bicool 4.3inch DSI Capacitive LCD for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/Compute Module 3+/3,Toughened Glass DSI Interface I2C Touch Display 800x 480,Support Raspbian/Ubuntu/Kali /WIN10 IoT/Retropie

4.3inch Capacitive Touch Display for Raspberry Pi, 800×480, IPS Wide Angle, MIPI DSI Interface
Display Port:DSI. Display Panel:IPS. View Angle:160°. Touch Type: Capacitive. Touch Port：I2C. Touch Panel: Toughened Glass.
Supports Raspbian, 5-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free.
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, Compute Module 3+/Compute Module 3. Note: Compute Module 3+/Compute Module 3 requires extra adapter board

Rank No. #9

1.28inch Touch Round LCD Module with Touch Panel, 240×240 IPS Capacitive Display Screen, 65K RGB Color, SPI & I2C Port, GC9A01 & CST816S Chip, for Raspberry Pi/Raspberry Pi Pico/Ardu/STM32, etc

1.28inch Round LCD Display Module with Touch Panel, 240×240 Resolution, IPS screen. 65K colors, clear and colorful displaying effect.
Embedded GC9A01 driver chip and CST816S capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi/Raspberry Pi Pico/for Arduino/STM32,etc.
High touch screen transmittance, fast response and long lifetime. Small Size, Touch More Possibilities: Suitable For Various Smart Devices Development, Can Realize Human-Computer Interaction Function.
Operating voltage: 3.3V / 5V. Resolution: 240 × 240 pixels. LCD controller: GC9A01. Touch controller: CST816S. Communication interface: 4-wire SPI. Communication interface: I2C. Display panel: IPS. Touch type: Capacitive.
Comes with online development resources and manual (examples for Raspberry Pi/Raspberry Pi Pico/Arduino/STM32)

Rank No. #10

1.28inch Round LCD with Touch Panel,240×240 IPS Screen Display Module,SPI and I2C Communication,with GC9A01 Display Driver,CST816S Touch Driver,for Raspberry Pi, Raspberry Pi Pico, for Arduino, etc

1.28inch Touch LCD Display Module, Embedded GC9A01 Driver And CST816S Capacitive Touch Control Chip. Using SPI And I2C Communication Respectively.
240×240 resolution, 65K colors, clear and colorful displaying effect.
High touch screen transmittance, fast response and long lifetime. Embedded GC9A01 driver chip and CST816S capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins.
Supports controller boards like Raspberry Pi/Raspberry Pi Pico/for Arduino/STM32.
Comes with online development resources and manual (examples for Raspberry Pi/Raspberry Pi Pico/Arduino/STM32)

Rank No. #11

HiLetgo 3.5" TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560

3.5" TFT LCD Display ILI9486/ILI9488 480x320 Suitable for MEGA2560
Support Arduino Mega2560 Directly inserted
OnBorad level conversion chip for 5V/3.3V MCU
Compatible with 3.3/5V operation voltage level
Compatible with Arduino-Series development Board. (Please notice:This Screen is not touch screen)

Rank No. #12

IZOKEE 0.96'' I2C IIC 12864 128X64 Pixel OLED LCD Display Shield Board Module 4 Pin for Arduino for Raspberry Pi (Pack of 3pcs, White-IIC)

Rank No. #13

DWEII 2.4" 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 DIY Electronic - Blue Light

Interface Selection: to choose SPI or IIC interface through R3, R4, R5
SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
This is a 2.42 inch OLED display module of 128x64 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current
Diagonal Screen Size: 2.42 inch
Driver IC: SSD1309

Rank No. #14

Treedix 3.5 inch TFT LCD Display 320 x 480 Color Screen Module Compatible with Arduino UNO R3 Mega2560

Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit.
The module display area contains 320x 480pixels.
This product accords with RoHS environmental criterion.
Compatible with Arduino UNO R3 Mega2560 DUE.

Rank No. #15

1.28inch Round LCD IPS Module 240x240 Resolution 65K RGB Colors SPI Interface for Arduino/Raspberry Pi/Jetson Nano/STM32

240×240 resolution, 65K RGB colors, clear and colorful displaying effect
SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32
OPERATING VOLTAGE:3.3V / 5V
DISPLAY PANEL: IPS. PIXEL SIZE: 0.135 × 0.135mm
DRIVER: GC9A01

Rank No. #16

Hosyond 3pcs IIC I2C 2004 LCD Module 20x04 LCD Screen Module Display for Arduino Raspberry Pi

2004 LCD screen can display 4 lines x 20 characters, with i2c serial interface, blue display.
Compatible with most development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32, etc.
Power supply: 5v; I2C address: 0x27; wiring method: GND—GND, VCC—VCC, SDA—A4, SCL—A5.
Built-in independent potentiometer, backlight can be adjusted through the back potentiometer.
Widely used in: Internet of Things, school electronics projects, smart buildings, maker DIY projects, etc., can display letters, characters, numbers, real-time clock or temperature.

Rank No. #17

HiLetgo 2pcs 5V 2004 1602 LCD Display IIC I2C Adapter IIC Serial Interface Adapter for Arduino Robort Parts

HiLetgo IIC I2C Serial Interface Module
Supply Voltage :2.5-6V
Supports the I2C protocol
PCB Color: Black

Rank No. #18

Adafruit 1947 Touch Shield, 2.8" TFT for Arduino with Capacitive Touch, White

2.8 inch; FT2606 touch screen controller; High speed SPI display with digital I2C touchscreen driver; Single-touch capacitive touch bonded on top; 4 white led backlight
240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer
We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller
Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT
Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4; That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD

Rank No. #19

LCDOLED Replacement 14.0 inches FHD 1080P IPS LCD Display Touch Screen Digitizer Assembly with Board for Acer Spin 3 SP314-53 SP314-53N SP314-53GN N19P1 Series SP314-53N-77AJ SP314-53N-53SH (No Bezel)

1. * Warning: Acer Spin 3 SP314-53 is equipped with 2 different types of touch screens: I2C and USB types. * Please check the touch type of your laptop from Computer Management(Local)>Device Manager>Human Interface Devices>if ONLY one "I2C HID Device" = USB Type /// if two "I2C HID Devices" = I2C Type. Please refer to the product image2-3 and confirm the type of your touch screen, then leave us a message with the type of your touch screen and the specific model of your laptop after your payment.
2. *Warning: This item is the I2C type, and it does NOT support the active pen & stylus!；Compatible Model: for Acer Spin 3 SP314-53 SP314-53N SP314-53GN N19P1 Series SP314-53N-77AJ SP314-53N-53SH；LCD Model: B140HAN04.0 or compatible；Size: 14.0 inches ；LCD Connector: EDP 30Pins；Resolution: 1920x1080 -IPS；Backlight: LED LCD
3. Package includes the LCD screen + touch digitizer assembly + touch control board ONLY. No extra bezel, touch controller board, LCD cable, back cover, hinges, instruction or tools , etc. Please keep your original parts.
4. The item is only available for the laptop with touch function. It will be well tested and packed before shipping.
5. Please double-check the MODEL and SIZE again of your laptop before you purchase. If you are not sure whether it is the correct item you need, please confirm with us and provide the specific model and pictures of your original screen for a correct offer.

Rank No. #20

waveshare 2.9inch Capacitive Touch e-Paper Module for Raspberry Pi Pico, 296×128 Pixels, Black/White Two-Color, SPI / I2C Interface, Support Partial Refresh

2.9inch capacitive touch ePaper module, 296×128 resolution.Support Partial Refresh
5-points touch support, user-defined wakeup gesture.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI / I2C interface, requires minimal IO pins. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

Last update on 2023-07-31 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best I2C Touch Screen?

Do you get stressed out thinking about shopping for a great I2C Touch Screen? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching I2C Touch Screen, which is why we have assembled a comprehensive list of the greatest I2C Touch Screen available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for I2C Touch Screen that you consider buying. Your questions might include the following:

Is it worth buying an I2C Touch Screen?
What benefits are there with buying an I2C Touch Screen?
What factors deserve consideration when shopping for an effective I2C Touch Screen?
Why is it crucial to invest in any I2C Touch Screen, much less the best one?
Which I2C Touch Screen are good in the current market?
Where can you find information like this about I2C Touch Screen?

We’re convinced that you likely have far more questions than just these regarding I2C Touch Screen, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for I2C Touch Screen, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible I2C Touch Screen. Make sure that you are only using trustworthy and credible websites and sources.

We provide an I2C Touch Screen buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available I2C Touch Screen currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of I2C Touch Screen has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an I2C Touch Screen?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your I2C Touch Screen.
Customer Ratings: Number ratings grade I2C Touch Screen objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their I2C Touch Screen.
Product Quality: You don’t always get what you pay for with an I2C Touch Screen, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an I2C Touch Screen is should be an indication of how long it will work out for you.

We always remember that maintaining I2C Touch Screen information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding I2C Touch Screen is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Are there any I2C drivers for Raspberry Pi?

A: There are many touschscreens for the Pi that use an I2C interface. Pimoroni’s HyperPixeluses a FocalTech FT6236. Datasheet for the controller. AdaFruit’s PiTFT 2.8″uses a FocalTech FT6206. Both of these are capactive multi-touch, and use drivers that are already in the Raspberry Pi OS.

Q: How to enable HID compliant touch screen driver?

A: In Windows, search for and open Device Manager. Expand the Human Interface Devices heading. The touch screen device is labeled HID-compliant touch screen, or similar. Right-click the touch screen device. If the option to enable the device is included in the menu, click Enable.

Q: How to enable touch screen in Windows 10?

A: Second, enable the touch screen driver in Device Manager: In Windows, search for and open Device Manager. Expand the Human Interface Devices heading. The touch screen device is labeled HID-compliant touch screen, or similar. Right-click the touch screen device. If the option to enable the device is included in the menu, click Enable.