Skip to content

Contents

The Best Lipo Charging Board of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Lipo Charging Board of 2023. Check our ranking below.

2,892 Reviews Scanned

Rank No. #1
Padarsey XT60 Parallel Charging Board 2S-6S Lipo Battery Charger Plate with 4mm Bullet Banana Connector Plug for Imax B6 B6AC Charger
  • 1) XT60 Parallel board for lipo balance charger, such as imax b6 b8 b6ac, una6, and other balance chargers
  • 2) Save your time: which lets you charge and balance up to six lipo batteries at the same time
  • 3) Support max six 2-6s batteries sets: features 4mm bullet banana plug for your batteries' main leads and jst-xh balance plugs ranging from 2s to 6s
  • 4) Prevent short circuit: built-in short circuit protection, prevent each cell when overcharge or short circuit happens
  • 5) Super strong expansion ability: it can support combined use for three parallel ok boards (it means you can charge eighteen batteries which have the same characters at the same time)
SaleRank No. #2
diymore 5pcs TP4056 Type-C USB 5V 1A Battery Charger Module Charging Board with Dual Protection Functions
  • Input interface: Type-C USB.
  • Battery overcharge lifting voltage: 4.00 V
  • Battery: over-current protection current 3 A
  • Maximum charging current output: 1000 ma
  • Light state: no load the light not bright, red light for recharging, is full of blue light.
Rank No. #3
HGLRC Thor 6 Port Lipo Battery Balance Charger Board Pro 40A XT60 XT30 Plug 2-6S Integrated with Lipo Discharger for IMAX B6 ISDT Q6 Nano HOTA D6 Pro P6
  • Input voltage:2-6s
  • Cut-off voltage of discharging of Single-chip:3.8V
  • Battery type:LiPo battery
  • Battery interface:XT30/XT60
  • 【Why Choose Us 】 We are the Original HGLRC manufactory , If there are any question or need any help , pls feel free contact us , we will always here help you out within 24 hours . Choose us risk free today 🙂
Rank No. #4
3S 4S 12V 5A Battery Active Equalizer BMS Balancer Lipo Li-ion LFP LiFePO4 Lithium Battery Balance Active Energy Transfer Equalization Module Faster Whole Group Capacitor Balancer PCB
  • Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. 【NOTE Tips】Well tested by the manufacturer. As long as the wiring is correct, the product guarantees long-lasting and effective performance. Of course, if customers have any questions, they can take the initiative to contact us, we are absolutely capable of providing more professional answers, rather than a direct refund returns.
  • Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB. Balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
  • The quiescent current is about 9mA, and the battery capacity is recommended to be used between 30-200AH/Per Balancer. High-capacity batteries can be connected in parallel with multiple equalizers.
  • With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
  • 【NOTE】: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board. Tips: This balancer board is backward compatible by default. eg. If it is used for 3S, the last line B4+ is empty.
Rank No. #5
HGLRC Thor Lipo Battery Balance Charger Board Pro 40A XT60 XT30 Plug 2-6S Integrated with Lipo Discharger for IMAX B6 ISDT Q6 Nano HOTA D6 Pro P6
  • 【Multiple security protection】With design of short circuit protection and positive negative, Charge/indication of battery balance, connector protection short circuit.
  • 【Charge Connector Protection】Each electric circuit has its own 15A fuse, escort your safety.
  • 【Battery Balancing Connector Protection】There is an indication of LED shorted in Self-resetting, thermal fuses between every Balancing pin.
  • 【Charging method】Four XT30/XT60 charging ports, support 4 sets of batteries to be charged at the same time.
  • 【Why Choose Us 】 We are the Original HGLRC manufactory , If there are any question or need any help , pls feel free contact us , we will always here help you out within 24 hours . Choose us risk free today 🙂
Rank No. #6
HobbyFly XT60 XT30 RC Lipo Battery Parallel Charging Board 2 in 1 Parallel Charging Plate XT30 XT60 Plug Supports 5 Packs for 2S-6S Lipo Battery
  • lipo battery parallel charging board supports XT60 connector and XT30 conector lipo battery.High quality with a-mass XT60 connector.
  • Supports up to 5 packs of the same type, same cells 2-6S battery pack(not include 5S).
  • XT30 XT60 parallel charging board used for simultaneously charging multiple lithium batteries(including LiPo, LiFe, and Li-ion types)
  • Charge 5 lipo batteries at the same time when used with a balance charger,saving charging time
  • With 2 types connector charge cable used for almost kinds of lipo balance charger,22AWG balance cable,14AWG main charge cable
Rank No. #7
AKK XT60 Parallel Battery Charging Board 2S-6S Lipo Balance Charger Plate
  • High Quality 2S-6S Lipo Parallel Charging Board Charger Plate T Plug for Imax B6 B6AC B8 6in1
  • Each board can charge up to six batteries, from 2S up to 6S, at up to a 30A charge rate.
  • Parallel charge boards allow you to charge and balance up to six battery packs simultaneously
  • T-Plug with a security plug silicone cap,the balanced output line using 20AWG multi-strand silicone wire
  • It has 20Z thick copper foil, sustainable resistance to flow 60A, can support combined use for three parallel charging boards.
Rank No. #8
HobbyFly XT30 XT60 XT90 JST T Connector Lipo Battery Charger Board 2-6S Parallel Balance Charging Board for Imax B6 B6AC IDST Q6 Lite Balance Charger
  • XT30 XT60 XT90 JST T Connector Lipo Parallel Charging Board.
  • Supports 2-6S lithium battery charging and 2-6s extension parallel charging board
  • Charge cable:14awg silicon cable which can stand with heavy current
  • Multi-function charging board with XT30, XT60, XT90,T and JST plug in one board to meet almost kinds of batteries
  • 4.0mm banan plug and XT60 plug,Compatible for Imax B6/B6AC ISDT HOTA etc chargers
SaleRank No. #9
XT30 XT60 Plug 2‑6S Lithium Batteries Balanced Charging Board Lipo Battery Parallel Charging Board for IMAX B6 Charger
  • SUPPORT 5 SETS BATTERY PACKS: Lipo battery charging board support up to 5 sets of 2‑6S battery packs of the same type and same core (excluding 5S)
  • CHARGE AT THE SAME TIME: XT30 XT60 parallel charging board for charging multiple lithium batteries, including LiPo, LiFe, Li ion types at the same time
  • TIME SAVING: Using a balance charger, so that can charge 5 lithium batteries at the same time, saving charging time
  • 2 CONNECTORS CHARGING CABLE:Charging cable with 2 types of connectors for almost every kind of lipo balanced charger, 22AWG balanced cable, 14AWG main charging cable
  • COMPATIBLE WITH VARIOUS CHARGERS: Lipo battery parallel charging board is compatible with for IMAX B6, for ISDT Q6 Pro, for D2, for T8 chargers
Rank No. #10
ISDT PC-4860 Lipo Battery Charger 1-8S XT60 Safe Parallel Charge Board Balance Charging Plate for RC Battery Charger Lithium Batteries
  • ★ISDT PC-4860s 1-8S safe parallel charging battery.It can charge four sets of electricity at one time.All aluminum materials,fire protection,short circuit prevention,anti fall.The appearance is simple and generous, the material is durable, safe and practical,and this is the biggest feature of the charging plate.
  • ★Safety beauty efficiency are integrated,smaller and lighter than ISDT PC-4860 version,more intelligent and smarter than other lipo battery charger.
  • ★Compact Size: XT60 Parallel Charge Plate is developed with reasonable size and scientific segmentation design to ensure high safety, efficient heat dissipation and comfortable hand feeling.
  • ★Faultless Security Assurance:32pcs Fuse,support 40A input,4 channels output, Aluminum case to avoid exploding or catching fire.
  • ★Precision CNC: Wire electrode cutting >> CNC >> Polising >> Sand blasting >> Anodizing >> assembling >> All inspection and packing.
Rank No. #11
Treedix 2pcs Type C USB LiPo Battery Charger Board with Battery Protection JST Socket with LED Indicator Charging Rate Adjustable Automatic Power-Down Thermal Regulation
  • This is a lithium battery charger equipped with a battery charge controller IC MCP73831T-2ACI/OT, the input charging connector uses Type C
  • Automatic Power-Down:There is an LED indicator on the charging board. When charging, the led indicator will be lit, and when the battery is fully charged, the led indicator will go out.
  • The default charging rate of the charger is 500mA. If the battery is charged with a current that exceeds the battery charging current specification, it will cause the life of the lithium battery to decrease. So you can add some resistors on R1 (this would require cutting a trace) or replacing the surface mount resistor with a higher resistance value.
  • It is for charging 3.7/4.2v single Lithium Ion/Lithium Polymer batteries
  • Plug the Type C cable into the USB port of the charging board, and insert the lithium battery into the JST port on the other end
SaleRank No. #12
Parallel Charging Board, Balance Charger Charging Adapter Charger Plate for LiPo Life Batteries with Connecting Cable
  • PROTECTION FUNCTION: Comes with short circuit protection function. Support combined use of 3 parallel charging boards (charge for 18 battery packs at the same time).
  • IMPROVE THE BALANCE EFFICIENCY: 20Z ultra thick copper foil can be resistant to 80A current constantly. It can avoid excessive charging of a single battery to improve the balance efficiency.
  • SAVE TIME: Avoid the trouble of replacing the battery repeatedly. The charging time is only the charging time of a single battery, which saves charging time.
  • NOTE: If the maximum output current of your balanced battery is less than the total current "I", set the charger current to the maximum value. The maximum current of the balanced charging pad is 80A. The voltage of the battery must be the same when charging, and the capacity and discharge rate can be set arbitrarily. After a few balances, the voltage will be more balanced and the pressure difference will be smaller.
  • WARNING: If you only need to charge less than 6 battery packs, place the housing on the T plug or other plugs you are currently using to avoid accidents. Each T plug has power when charging.
Rank No. #13
FLY RC 4pcs JST-XH Balance Board 2S-6S 3S Lipo Battery Charger Extend Expansion Board Adapter Converter for RC Vehicles Lipo Battery Charging
  • Works with 2S - 6S batteries with a JST-XH balance plug
  • Expand the charging capabilities of the X4 charger
  • JST-XH Connector fit to Traxxas, Venom, Racers Edge, Thunder Power, And Many More Batteries.
  • The adapter plugs into the 6-cell balance port on the charger, and breaks out into the 2S, 3S, 4S, 5S and 6S connectors.
  • With this adapter, you get a One-size-fits-all module that will work with any battery from 2 cells up to 6 cells
Rank No. #14
FPVKing T Plug Deans Parallel Charge Board 2S-6S Lipo Balance Charging Board for Imax B6 B6AC Charger Expansion Board
  • Parallel packing board for lipo balance charger, such as imax b6 b8 b6ac, una6, and other balance chargers
  • Save your time: which lets you charge and balance up to 6 lipo batteries at the same time
  • Support max six 2-6s batteries sets: features t-plugs for your batteries' main leads and jst-xh balance plugs ranging from 2s to 6s
  • Prevent short circuit: built-in short circuit protection, prevent each cell when overcharge or short circuit happens
  • Super strong expansion ability: it can support combined use for three parallel ok boards (it means you can charge 18 batteries which have the same characters at the same time)
Rank No. #15
Apex RC Products JST-XH 2-6S Lipo Battery Charger Balance Board - 2 Pack #1390
  • INCLUDES: Two (2) Balance Boards
  • Works With Most Lipo Battery Chargers
  • Works With 2S-6S Batteries With A JST-XH Balance Plug
  • High Quality Silicone Wires
  • JST-XH Connector Is On Most Lipo Batteries
SaleRank No. #16
AITIAO 2PCS Type-C USB 2S 2A Boost Converter 8.4V 12.6V 16.8V Step-Up Power Module LiPo Polymer Lithium Battery Charging Protection Board
  • 2-Cell(2S) 8.4V version: Input voltage: DC 3-6V (recommended DC 3.7V 5V); Input current: 1A (1A version); 2A (2A version); 4A (4A version)
  • Charging voltage: 8.4V; Charging current: 0.55A (1A version); 1.1A (2A version); 2.2A (4A version)
  • LED indicator: "CR" LED is the charging status indicator; "OK" LED fully charged or constant voltage mode
  • Battery over-voltage protection, automatic charging.Protection voltage below input and battery short circuit.
  • Package Includes: 2PCS 2S 2A TypeC USB Lithium Battery Step-up Charging Board
Rank No. #17
YoungRC EC5 Parallel Charging Board 2S-6S Lipo Battery Balance Charge Board Expansion Board for RC Drone Helicopter Battery Charger
  • Function: This EC5 parallel charging board is suitable for connect and charge 1 to 6 batteries in parallel (including the Li-Po, Li-Fe and Lion) .It can charge 2s-6s battery pack.
  • High quality material: It's made of Pcb + Plastic. Using high-quality multi-strand silicone wire,Thicker PCB copper. Safe, durable and long service life.
  • High efficiency: It charge and balance up to multiple batteries at the same time instead of balancing batteries 1 by 1, save your time. Stable and ensure efficient work.
  • ★★Note: The EC5 parallel charging board only support charging multiple batteries with the same voltage (2S With 2S, 3S With 3S, Etc) and the same cell count at the same time. Otherwise, the battery and charging board may be damaged, or even cause a fire.
  • If you have any problems during use, please do not hesitate to contact us at any time, we will try our best to help you
Rank No. #18
AOICRIE 2pcs RC Product JST-XH-2-6S Lipo Battery Charge Balance Board, JST XH Board Balance Expansion Charger Adapter gor RC 6S LiPo Battery Charge
  • Works With Most Lipo Battery Chargers.
  • Allows 2S - 6S LiPo batteries to be properly balanced during charging process.
  • Balance Board with 2S - 6S Terminals and Balance Board to Charger Cable,High Quality Silicone Wires.
  • Plugging cable into charger and plugging balance lead of battery into balance board COMMENTS: For the Duratrax Onyx 245 charger only.
  • JST-XH Connector Venom, Racers Edge, And Many More Batteries.
Rank No. #19
Upgraded XT30 Pro Parallel Charging Balance Board for 1S 2S 3S LiPo Batteries Compatible with XT30 JST-PH 2.0 Connector LiPo Balance Charger
  • Support 6 packs XT30/JST 2S or 3S LiPo Batteries balance charge,5 packs JST-PH 2.0 1S LiPo Battery with LED shows the voltage of each cell and total voltage
  • Two type connectors used for almost all kinds of lipo balance chargers.
  • High-quality XT30 connectors Thicken PCB copper to stands with heavy current,allow security using 20A charging current
  • Voltage Display to show exact voltage for lipo battery,the voltage of each cell and total voltage
  • Equipped with 20A fuse protection between any two groups of batteries for safety, to hadle the large battery pressure
SaleRank No. #20
ALAMSCN TP4056 Type-C USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board TC4056A with Dual Protection Functions(Pack of 12)
  • The input terminal has a Type-c USB female socket, which can be directly used as an input to charge the lithium battery with a mobile phone charger.
  • There are solder joints for input voltage wiring, which is convenient for DIY.
  • Two-in-one charging and discharging protection function.
  • No load the light not bright, red light for recharging, is full of green light.
  • Note: When the battery is connected for the first time, the protection circuit can be activated by charging it with 5V voltage.

Last update on 2023-08-08 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Lipo Charging Board?

Do you get stressed out thinking about shopping for a great Lipo Charging Board? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Lipo Charging Board, which is why we have assembled a comprehensive list of the greatest Lipo Charging Board available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Lipo Charging Board that you consider buying. Your questions might include the following:

  • Is it worth buying an Lipo Charging Board?
  • What benefits are there with buying an Lipo Charging Board?
  • What factors deserve consideration when shopping for an effective Lipo Charging Board?
  • Why is it crucial to invest in any Lipo Charging Board, much less the best one?
  • Which Lipo Charging Board are good in the current market?
  • Where can you find information like this about Lipo Charging Board?

We’re convinced that you likely have far more questions than just these regarding Lipo Charging Board, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Lipo Charging Board, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Lipo Charging Board. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Lipo Charging Board buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Lipo Charging Board currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Lipo Charging Board has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Lipo Charging Board?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Lipo Charging Board.
  5. Customer Ratings: Number ratings grade Lipo Charging Board objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Lipo Charging Board.
  7. Product Quality: You don’t always get what you pay for with an Lipo Charging Board, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Lipo Charging Board is should be an indication of how long it will work out for you.

We always remember that maintaining Lipo Charging Board information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Lipo Charging Board is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Can a LiPo battery be charged with any Charger?

A: A LiPo battery can only be charged using a LiPo battery charger. Using any other type of charger could result in an explosion and/or fire. When you plug your LiPo battery into the Tamiya connector on the LiPo battery charger, make sure the polarity is correct: red to red, black to black.

Q: Do you plug in balance lead when Parallel Charging?

A: Always “balance charge” when parallel charging, and remember to plug in the balance leads on every pack so that all the cells in every battery are balanced before, during and after charging. Make sure you are plugging in the balance lead in the correct orientation.

Q: Can a LiPo battery be used for a drone?

A: If you are a hobbyist who enjoys flying RC planes, helicopters, or drones, you are likely using a LiPo battery to power your crafts. LiPo batteries are ideal for this because they are lightweight and pack a great deal of power. However, LiPo batteries will need to be charged and monitored even when in storage.

Q: Why do Parallel Charging boards have built in protection?

A: High end parallel charging boards have built-in protection (inline automotive fuses or poly fuses that will blow in case of excessive current draw). That means they cut off the connection if there is a problem. This is an essential safety feature that minimizes the risk of damaging your battery and causing a fire.

Related Post: