Skip to content

Contents

20 Best Zooz Z Wave Plus S2 Stick Zst10 of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Zooz Z Wave Plus S2 Stick Zst10 of 2023. Check our ranking below.

2,490 Reviews Scanned

Rank No. #1
Zooz 800 Series Z-Wave Long Range S2 USB Stick ZST39 LR, Great for DIY Smart Home (Use with Home Assistant or HomeSeer Software)
  • READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device. NVM back-up from 500 or 700 series Z-Wave sticks will brick the device. Do NOT apply NVM backups or firmware updates published outside of the Zooz support portal to avoid bricking the stick and voiding its warranty.
  • NEW 800 SERIES Z-WAVE LONG RANGE: Take advantage of the latest wireless innovation with Z-Wave Long Range that extends your network coverage up to a mile. NOTE: Your home automation software needs to support the Long Range implementation on the interface side as well as the end Z-Wave device you add to the network for the Long Range functionality to be fully unlocked.
  • WHAT YOU NEED: This 800 Series Long Range Stick adds Z-Wave Plus and Z-Wave Long Range capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system.
  • ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS) and HomeSeer. Supports OTA firmware updates and and all of the latest Z-Wave library commands.
Rank No. #2
Zooz Z-Wave Plus S2 Double Switch (White) ZEN30 for Fan and Light Combo (NO Speed Control), Signal Repeater, Hub Required (Works with Hubitat, Wink, SmartThings, Vera)
  • MULTI-FUNCTIONAL DIMMER: Smooth brightness control for incandescent and LED bulbs (up to 75 Watts of LEDs). Smart bulb ready! Double tap to full brightness, adjustable ramp rate, and dimming speed (your hub needs to support advanced setting input). NO DIRECT 3-WAY, only virtual 3-way available. Contact support for details.
  • POWERFUL RELAY: Connect any load up to 15A, including ceiling and exhaust fans for reliable on/off control from the relay button and via Z-Wave. Or use the button for scene control (multi-tap supported by select hubs only, contact support before buying).
  • EASY INSTALLATION: Pigtail wires for convenient connections. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.
Rank No. #3
Zooz 700 Series Z-Wave Plus S2 Dimmer Switch ZEN77, White | Simple Direct 3-Way and 4-Way Solution (Works with Regular Switches, No Aux Switch Needed) | Z-Wave Hub Required
  • WIRELESS BRIGHTNESS CONTROL: Turn your lights on or off and dim them with Z-Wave. Works with all of the LED's other dimmers flicker with (120 VAC only, no 0-10V control)! Hub required (sold separately), scroll down for compatibility. Voice control with Z-Wave hub ONLY (will NOT work directly with your smart speaker).
  • NEW 700 SERIES Z-WAVE: Boost your network with the latest Z-Wave technology that offers more range and faster communication speed than ever before. Each dimmer will act as a signal extender making your smart home mesh reliable. And if you need to troubleshoot connectivity issues, access a built-in range test tool straight from the switch!
  • SIMPLE 3-WAY & 4-WAY: Use it with existing on/off switches (NO dimmers) in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. No need for add-on switches, no need to rewire other boxes. Just wire the Zooz in the box with direct connection to power and neutral (check your boxes before buying).
  • FASTER INSTALLATION: The new model is just 1.16" deep so it will fit a shallow or crowded box much easier! It takes half the time to install the S2 switches in 3-way and 4-way set-ups than for any other Z-Wave solution. Intuitive wiring diagrams are printed in the manual (look for more on the Zooz website) and if you need custom instructions, just ask!
  • MORE FEATURES: Double tap to go from off to full brightness (single tap to last brightness level - now fully programmable if your hub supports advanced settings). NEW multi-color LED indicator with adjustable brightness level, night light mode, and many more features to customize the dimmer (if you have access to advanced features from your hub).
Rank No. #4
Zooz Z-Wave Plus S2 MultiRelay ZEN16 VER. 2.0 for Garage Doors, Sprinklers, Gas Fireplace; 3 Dry Contact Relays (15A, 15A, 20A); 12-24 V AC/DC or USB C Power; Signal Repeater; Hub Required
  • 3 RELAYS IN 1: Control 3 dry contact relays independently with one MultiRelay. Connect an optional wall switch for manual on/off control (dry contact only, NO voltage on the input side) or use your Z-Wave hub (required, sold separately) for wireless control and automation. Your smart speaker is NOT a Z-Wave hub. Does NOT fully work with Wink or Z-Wave alarm panels like Ring, Vivint, or Alarm.com (R1 control only). Custom edge driver required for SmartThings, go to Zooz support page for details.
  • VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), commercial garage doors at your business, gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A.
  • DIY INSTALLATION: Power it with a standard USB C cable and a 5V power supply (do NOT use USB chargers or Apple accessories) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V! Do NOT apply Voltage to the input (switch) terminals!
  • RELIABLE Z-WAVE: Comes with the latest S2 security and a powerful Z-Wave Plus signal repeater to boost your network. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.
  • HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. Works best with the Z-Box Hub. It was tested to work well with Hubitat, Home Assistant, and on SmartThings with a custom device driver (please go to Zooz support page for details). ADT Pulse, Vivint, Wink, and Ring all offer partial control (one relay or all at once instead of individual control for the relays).
SaleRank No. #5
Zooz Z-Wave Plus S2 Motion Sensor ZSE18 with Magnetic Mount, Works with Vera and SmartThings
  • EXTRA FEATURES: Adjustable motion sensitivity and retrigger time. Built-in Z-Wave range test tool for easier network troubleshooting. Vibration reports on SmartThings and other selected gateways.
  • 2 POWER SOURCES: Runs on a single battery for up to a year (depending on traffic and settings) OR on micro USB cable (NOT INCLUDED). Acts as signal extender when connected to USB.
  • FLEXIBLE DESIGN: Extremely small and light, the sensor sits in a perfectly shaped magnetic mounting base for precise and firm positioning.
  • CERTIFIED SECURE: Uses the latest S2 Z-Wave protocol and AES-128 signal encryption. Z-Wave Plus chip for longer range and increased battery life.
SaleRank No. #6
Aeotec Z-Stick 7 Plus, Zwave Plus USB to Create Z-Wave hub, Gateway Controller with 700 Series ZWave, SmartStart and S2, Works with Raspberry Pi 4, Compatible with Home Assistant
  • Works with Raspberry Pi, Windows, Mac, Linux to create a zwave hub for control of Z-Wave and Z-Wave Plus devices.
  • German engineered to use Aeotec exclusive Gen7 and 700 series technologies. Offers ZWave SmartStart and S2 security.
  • Faster, further. Z-Stick 7 wirelessly transmits up to 250% further in open-place space and with 18% faster CPU
  • Compatible with Z-Wave enabled, home automation software including Home Assistant and Indigo 7. No software included.
Rank No. #7
Zooz 700 Series Z-Wave Plus Smart Relay ZEN51 | Installs Behind Wall Switch Or at The Light | Compatible with SmartThings, Hubitat, and Home Assistant | Z-Wave Hub Required (Sold Separately)
  • SMART RELAY FOR ON/OFF CONTROL: Install this relay to add Z-Wave to the existing wall switch and keep your favorite switch style and color. The relay output is dry contact for your unique applications outside of lighting but note the input (switch) requires 120 V which makes it perfect for 120 V signal monitoring on sump pumps or motion lights. For a dry contact input device, look up ZEN16.
  • 3-WAY COMPATIBLE: Unlike many other smart relays, you can use this device to automate 3-way set-ups as well. Even if you don't have neutral available at any of the switch boxes, you can always install this relay at the light fixture where you'll have access to power and neutral. Always follow the wiring diagrams carefully and make any programming changes if needed when installing this relay.
  • EASY INSTALLATION: Pigtail wires for convenient connections. Connect to mechanical on/off or momentary switches only (NO dimmers or electronic / smart switches). The relay is small enough to fit in the most crowded box, just 1.5" x 1.4" and 0.7" deep. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.
  • SMART BULB MODE AND MORE: Bring back the switch function to your old switches even when using smart bulbs. The smart bulb mode allows you to control smart bulbs via Z-Wave without cutting power to them when off. Enjoy the new 700 series Z-Wave with powerful features like SmartStart and S2 authenticated security.
  • HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an updated Z-Wave hub to display correctly. It was tested to work well with Hubitat, Home Assistant (Z-Wave JS), HomeSeer and is compatible with SmartThings. This product is backed by US based support from Zooz, 7 days a week and a 5-year warranty once registered.
SaleRank No. #8
Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29
  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight.
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet.
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo).
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mind.
  • SUPPORT: Questions or issues? Zooz has fast and responsive US-based support to help you with set-up, functionality, and automation routines. Just ask!
Rank No. #9
Zooz 700 Series Z-Wave Plus Mesh Network Scene Controller ZEN32, White | Z-Wave Hub Required
  • MAIN BUTTON: Connect a 120 V light fixture (up to 150 W for LED's) to control it via Z-Wave or use the main button for wireless control only with up to 7 button triggers available. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub.
  • 4 REMOTE BUTTONS: Program each button to activate scenes or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter "Away" mode on your way out or to turn off all of the lights before you go to bed with a single click.
  • DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system.
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing.
Rank No. #10
Zooz 700 Series Z-Wave Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 x NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with Z-Box, SmartThings and Hubitat)
  • 2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels.
  • 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically.
  • AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A.
  • QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do NOT power with 110 V!
  • NEW 700 Z-WAVE: Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 700 series chip. It comes with S2 authenticated security and SmartStart for easy pairing. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.
Rank No. #11
Zooz 700 Series Z-Wave Plus Mesh Network Remote Control & Scene Controller ZEN34 (Battery Powered), White | Z-Wave Hub Required
  • REMOTE CONTROL: Use the paddles like remote control buttons to trigger scenes and turn other smart home devices on or off. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub.
  • ANYWHERE SWITCH: Install it in a regular switch box or stick it to any flat surface for convenient and wire-free control. This is a battery-powered device with a magnetic base that allows a flexible installation anywhere you always wanted another light switch (no electrician needed!).
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN34 is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system.
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing.
Rank No. #12
eXtremeRate Clear Octagonal Gated Sticks Faceplate Backplate Handles, DIY Replacement Grip Housing Shell Cover for Nintendo Switch Pro Controller - Controller NOT Included
  • Custom designed replacement front back housing and handles to perfectly fit for Nintendo Switch Pro controller. Ergonomic octagonal gated sticks design can greatly improve the joystick function, perfect for FTG games. Precision cut to work exactly like the original shell
  • Unique replacement case to add much more personality to your Switch Pro. The replacement housing will make your Switch Pro controller distinct when playing with friends, no more boring standard color
  • The installation process requires customer with moderate electronic installation experience. Kindly note that the installation of this shell will void the warranty of your Switch Pro. Get installation video guide on YouTube by searching "ExtremeRate Replace The Full Shell for Switch Pro Controller Guide" or "nrp3riEt7aA"
  • Made of premium ABS material, durable and practical; The clear color looks amazing
  • Package includes 1* faceplate, 1* backplate, 2* handle grips, 1* cross screwdriver, 25* spare screws. (Note: The controller, buttons and other parts are not included.)
Rank No. #13
HomeSeer SmartStick+ G3 Z-Wave Plus (V2) USB Stick with Latest Series 700 Z-Wave Chip | Works with HomeSeer, Home Assistant, Indigo & Other Smart Home Software Programs | Supports S2 Security
  • LATEST Z-WAVE TECH: SmartStick+ Includes a 700 Series Z-Wave Module (v7.18x firmware) and is Z-Wave Plus V2 Certified
  • SUPPORTS Z-WAVE S2 SECURITY: Includes Smart Start Inclusion (Requires Smart Start Compatible Hub or Software)
  • Z-FLASH COMPATIBLE: Works Nicely with HomeSeer Z-Flash OTA Firmware Updater
  • Z-WAVE PLUS (V2) PERMORMANCE: Longest Range, Fastest Transmission Speed, Best Bandwidth
  • SUPPORTS NETWORK BACKUP & RESTORE: Easily restore or move your network to another SmartStick+ (requires HomeSeer hub)
SaleRank No. #14
Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More
  • POWERFUL PLUG: The only Z-Wave Plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system. Connect your refrigerator, humidifier or dehumidifier, AC unit, fan, sump pump, or a gas clothes dryer to Z-Wave. NEW: 45 degree angled plug so you can fit 2 Smart Switches in a single receptacle!
  • POWERFUL Z-WAVE: With built-in Z-Wave Plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption.
  • POWERFUL CONTROL: Monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports (your Z-Wave hub needs to support this feature). NOTE: It is NOT a power outage monitor! Quick status reports to the controller and on/off state recovery after power failure.
  • POWERFUL HARDWARE: Made from high-quality components that will last, even when it's very cold or very hot (14° - 104°F, indoor use only). ETL certified: complies with North American electrical safety standards. Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle.
  • COMPATIBILITY: Use the Power Switch with any certified Z-Wave gateway for simple on/off control (Wink, Z-Wave alarm panels). Advanced settings and energy monitoring available for open systems only, including Vera, SmartThings (custom device handler required, contact seller first), HomeSeer, and Fibaro Home Center Lite.
Rank No. #15
Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 (Motion / Light / Temperature / Humidity)
  • 4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately.
  • NEW 700 SERIES VERSION: The included CR123A battery makes the sensor lasts much longer than any previous version. Updated motion detection allows you to get even quicker activity reports. New Z-Wave chip for better performance.
  • CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion clear delay time, and pick from 3 different LED indicator modes (your hub needs to support advanced parameter input).
  • SECURITY FIRST: This sensor is equipped with the latest S2 authenticated security and signal encryption. It's Z-Wave Plus 2 certified to ensure it complies with the highest industry standards. Supports SmartStart inclusion with a unique identifying PIN and QR code.
  • WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Hubitat, HomeSeer, Home Assistant, and compatible with SmartThings Hub.
Rank No. #16
Zooz 700 Series Z-Wave Plus Open|Close XS Sensor ZSE41 for Door, Window, and Gate Monitoring. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Ring Alarm.
  • FAST AND RELIABLE: Get notified on your Z-Wave hub's app or via text when a door or window is opened for easy DIY security monitoring. Use on safety gates, cabinet doors, patio doors, and more. Z-Wave hub required, sold separately (check below for compatibility).
  • EXTRA SMALL: Perfect for discreet mounting with a slim profile to fit most frames and surfaces.
  • OUTDOOR CASE AVAILABLE: The sensor is coated with protective rubber oil against corrosion and water leak damage. A splash is fine but if you want to install it outdoors, you'll need a dedicated waterproof case (sold separately, ask Zooz about it).
  • Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, Vera, and Ezlo hubs. Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others.
  • SMART SECURITY: 700 series Z-Wave chip with longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication. Covered by a 5-year limited warranty and backed by lifetime tech support 7 days a week.
Rank No. #17
Zooz Z-Wave Plus S2 12/24 V DC RGBW Dimmer ZEN31 for LED Strips and DC Lighting, Work as a Network Repeater (Z-Wave Hub Required)
  • SMART RGBW CONTROL: Change colors and hues, adjust brightness, and turn DC RGBW LED strips on or off from your Z-Wave hub (required, sold separately). Alexa is NOT a Z-Wave hub. Does NOT work with Wink and Z-Wave alarm panels. Custom driver required for works with SmartThings, contact seller for details.
  • HOW IT WORKS: You'll need a 12 or 24 V DC (not AC!) power supply depending on your LED strip requirements to power both the strip (sold separately) and the RGBW Dimmer. Do NOT exceed 120 W total for 12 V DC strips or 240 W total for 24 V DC strips! Do NOT use with addressable LED strips. Add the RGBW Dimmer to your Z-Wave hub to get wireless control of your lighting. Program schedules, and create custom scenes (if this functionality is supported by your hub).
  • EXTRAS: Enjoy more smart features like energy monitoring, scene control (double tap), and SmartStart (your hub needs to support these features). Add physical control of the light by connecting an on/off or momentary wall switch to the RGBW Dimmer, the Zooz ZAC99 model will work great. You can also use the 4 input terminals to monitor analog low voltage sensors and add Z-Wave to even more devices around you!
  • RELIABLE TECH: The RGBW Dimmer is Z-Wave Plus certified and comes with the latest S2 security protocol as well as 128-bit signal encryption to keep your smart home secure. The device is UL listed and conforms with North American safety standards. Made in Europe with carefully selected components.
  • HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. It was tested to work well with the Z-Box Hub, Home Assistant, HomeSeer, and works with SmartThings when using a custom driver (please contact seller for details or go to Zooz support page for details). Questions? Get in touch with Zooz support or the Amazon seller for quick and friendly help!
Rank No. #18
Zooz Z-Wave Plus 700 Series Titan Water Valve Actuator ZAC36 | Works with Ring Alarm | Compatible with Z-Box, SmartThings
  • SMART FLOOD PREVENTION: Shut your main water valve automatically when a leak is detected to prevent costly water damage. The Titan actuator installs over your ball valve and comes with a plug-in leak detector to monitor water presence around it. It will work offline with the probe connected directly to the Titan but the device works best when included to a compatible Z-Wave hub (sold separately) for full wireless functionality.
  • EXTREMELY STRONG: Unlike other retrofit solutions, the Titan is equipped with a powerful motor that opens and closes even the most stubborn valve reliably. It calibrates on each individual valve once installed for optimal performance.
  • DIY INSTALLATION: You don't need any tools and it takes just a few minutes to mount and calibrate the device. You can use it outdoors too! Follow the steps in the manual and installation video carefully when installing the product. Check your set-up before buying: suitable for 0.5" - 1.25" ball valves only; 3" clearance from the valve center to each side on the pipe, at least 1.25" clearance between the valve handle and the pipe, at least 1" clearance between the pipe and the wall.
  • Z-WAVE COMPATIBLE: Get the most of your Titan Valve Actuator when you include it to your Z-Wave hub. Program it to shut the water off if water is detected on any of your wireless leak sensors (sold separately) for complete protection. The Titan works best with the Z-Box Hub and is compatible with SmartThings, Hubitat, Ring Alarm, and Home Assistant. Check with Zooz for compatibility before buying if your hub is not listed.
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever and faster communication. Equipped with S2 Security and SmartStart. 5-year extended manufacturer warranty once registered and lifetime tech support included.
Rank No. #19
Zooz 700 Series Z-Wave Plus Water Leak XS Sensor ZSE42 for for Smart Flood Prevention. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Ring Alarm.
  • PREVENT WATER DAMAGE: Receive alerts on your phone when water is detected by the sensor once you include it to your Z-Wave hub (required, sold separately). Check below for compatibility. Pair with the Zooz Titan Water Valve actuator (sold separately) for a smart flood prevention system.
  • EXTRA SMALL: Place it under your appliances to monitor for leaks discreetly. It's OK if the device is splashed with water but it can't be fully submerged so keep that in mind when choosing the installation location.
  • NEW 700 SERIES CHIP: You get more Z-Wave range and longer battery life with this sensor. Better signal means more reliable and quicker reports to help you act faster in case of a leak.
  • Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, and Ezlo hubs (NOT supported by older Vera hubs). Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others.
  • SMART SECURITY: Equipped with the highest level of S2 security with SmartStart for fully encrypted communication. Covered by a 5-year limited warranty and backed by lifetime tech support 7 days a week.
Rank No. #20
AEOTEC Z-Stick Gen5 Z-Wave Hub Z-Wave Plus USB to Create Gateway (Ordinary White)
  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included
  • Z-Wave Plus certified. Certification number: ZC10-15060006

Last update on 2023-08-09 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Zooz Z Wave Plus S2 Stick Zst10?

Do you get stressed out thinking about shopping for a great Zooz Z Wave Plus S2 Stick Zst10? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Zooz Z Wave Plus S2 Stick Zst10, which is why we have assembled a comprehensive list of the greatest Zooz Z Wave Plus S2 Stick Zst10 available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Zooz Z Wave Plus S2 Stick Zst10 that you consider buying. Your questions might include the following:

  • Is it worth buying an Zooz Z Wave Plus S2 Stick Zst10?
  • What benefits are there with buying an Zooz Z Wave Plus S2 Stick Zst10?
  • What factors deserve consideration when shopping for an effective Zooz Z Wave Plus S2 Stick Zst10?
  • Why is it crucial to invest in any Zooz Z Wave Plus S2 Stick Zst10, much less the best one?
  • Which Zooz Z Wave Plus S2 Stick Zst10 are good in the current market?
  • Where can you find information like this about Zooz Z Wave Plus S2 Stick Zst10?

We’re convinced that you likely have far more questions than just these regarding Zooz Z Wave Plus S2 Stick Zst10, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Zooz Z Wave Plus S2 Stick Zst10, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Zooz Z Wave Plus S2 Stick Zst10. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Zooz Z Wave Plus S2 Stick Zst10 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Zooz Z Wave Plus S2 Stick Zst10 currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Zooz Z Wave Plus S2 Stick Zst10 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Zooz Z Wave Plus S2 Stick Zst10?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Zooz Z Wave Plus S2 Stick Zst10.
  5. Customer Ratings: Number ratings grade Zooz Z Wave Plus S2 Stick Zst10 objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Zooz Z Wave Plus S2 Stick Zst10.
  7. Product Quality: You don’t always get what you pay for with an Zooz Z Wave Plus S2 Stick Zst10, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Zooz Z Wave Plus S2 Stick Zst10 is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Zooz Z Wave Plus S2 Stick Zst10 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Zooz Z Wave Plus S2 Stick Zst10 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is the Zooz USB Z-Wave Plus?

A: The ZooZ USB Z-wave Plus is made by a new player in the z-wave usb sticks playing field. ZooZ provides affordable Z-wave products with great features. It must be noted that the Aeotec has the advantage of a built in battery. This battery is better suitable for older z-wave products.

Q: What is the Z-Wave Plus S2 stick?

A: It means that you can finally take full advantage of your S2 sensors, switches, and plugs. WHAT YOU NEED: This S2 Stick adds Z-Wave Plus capability to your DIY smart home set-up. You’ll need a dedicated computer (PC, laptop, or Raspberry Pi) and home automation software of your choice (not included) to complete the system.

Q: What can I do with a Z-Wave USB stick?

A: A z-wave stick can be used as an independent way to connect to your z-wave network. There is no dependency on a expensive home automation hub. But instead you can use cheap small computers such as the Raspberry PI to host home automation software and connect to your z-wave USB stick.

Q: What do I need to set up a Z-Wave Plus smart home?

A: WHAT YOU NEED: This S2 Stick adds Z-Wave Plus capability to your DIY smart home set-up. You’ll need a dedicated computer (PC, laptop, or Raspberry Pi) and home automation software of your choice (not included) to complete the system. ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS) and HomeSeer.

Related Post: