The Best 4 Axis Stepper Motor Controller of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best 4 Axis Stepper Motor Controller of 2022. Check our ranking below.

2,045 Reviews Scanned

Rank No. #1

Stepper Motor Driver Controller Module - DC 5-30V 4A Reverse Pulse Speed Control Board Programmable PLC Serial Communication for Industrial Control 17/23 Motor

Multiple Functions: Support automatic, manual, serial port communication control, can control 42/57 two-phase stepping motors directly or with stepping motor drivers, it is a dedicated operation control module for single-axis stepping motors. A variety of fixed operation modes are built into the module, and the user can quickly select the appropriate motion trajectory
9 Modes: The parameters of each mode can be set in advance, with the use of buttons, it is suitable for almost all occasions, with multiple modes such as forward/reverse/delay/cycle/self-locking/no lock/speed
Save Function: distance/speed/delay/cycle times can save the settings after power off. It can run independently as a module or be used with other systems
High-definition LCD Screen: Clearly and intuitively display the number of forward and reverse pulses, forward and reverse speed, delay, cycle working time and other parameters, which is convenient for browsing and setting
Wide Range of Applications: It can be used in general industrial control occasions to achieve high-precision motor control. It is not suitable for special industries such as medical fire protection or life-threatening fields

Rank No. #2

OUYZGIA TB6600 Stepper Motor Driver 4A Stepper Driver for Nema 17, 23 and 34 Stepper Motor, 9-42V, 32 Segments, Upgraded Version-1PCS

Signal Input: Single-ended, pulse/direction. Optocoupler isolated signal input, strong anti-interference capability
Subdivision Options: 1/2/4/8/16/32 subdivision to drive 4/6/8 wire 2 phase/4 phase hybrid stepper motors, (current less than or equal to 4.0A). Compatible with stepper motors with step angles of 1.8° and 0.9°
Current and Voltage: Output Current: 0.5A-4.0A, the maximum output current is 4.0A. Input voltage: 9-42VDC, external signal 3.3-24V can be connected directly without series resistor
Safe and Reliable: Overheat, overcurrent, undervoltage lockout, input voltage protection against reversal, etc. Safer. The current is automatically halved at standstill
High Compatibility: Suitable for all brands of 4/6/8 wire 2/4 phase hybrid stepper motors. Suitable for various small and medium-sized automation equipment and instruments, such as: engraving machines, marking machines, cutting machines, laser illumination, plotters, CNC machine tools etc

Rank No. #3

CNCTOPBAOS 4 Axis Offline Stand Alone CNC Motion Controller System DDCSV3.1,Servo/Stepper Motor Control Replace Mach3 PLC+100PPR MPG Handwheel with E-stop for CNC Router Engraving Machine

♞【Brief introduction】The DDCSV3.1 is a 4 axis motion controller,the highest output pulse per axis is 500KHz.This provides high control precision for stepper motors and servo motors.The DDCS operates as a stand alone system without the need of a computer, and it needs two 24V DC power supplies.
♞【Compatible with G code set】5 inches TFT Screen ; Resolution ratio: 480x272 ; the highest output pulse per axis is 500KHz. This provides high control precision for stepper motors and servo motors. All operations are controlled by only 17 keys and it supports the FANUC with high universality to be compatible with G code set,with 4G USB flash disk support for G code file input,no size limited of the G-code file.
♞【Brief technical feature】16 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs ; Analog spindle control 0-10V spindle control (can be modified as PWM output) ; ARM9 main control chip,FPGA core algorithm chip ; Jog function for each axis (continuous, step, defined distance) ; Customer can define the distance ; Support NPN type limited switch.
♞【MPG Handwheel】MPG Resolution:100 PPR ; Switch:X1,X10,X100,with Emergency stop,LED indicator, with 15-pin plug,so it's play and plug.
♞【Applications】The DDCV3.1 can be used for many styles and types of CNC machines. Lathes, CNC Routers,Pick&Place and Milling Machine,lathe machine and cutters are just a few examples.

Rank No. #4

RATTMMOTOR 4 Axis USB Mach3 CNC Controller Kit Nema23 Stepper Motor Single Shaft 76mm 270Oz-in 3A 1.8Nm+CNC Motion Control Board Signal Output 0-10V+TB6600 Driver 4A+350W 24V DC Switch Power Supply

【Nema23 Stepper Motor】Step Angle: 1.8°; Current: 3.0A; Holding torque: 180N.cm/18kg-cm 270 oz-in; Shaft : single shaft,8mm diameter.
【TB6600 Driver】(1) VInput voltage: DC9-42V; Maximum power consumption: 160W；Output current: 0.5-4A. (2)Suitable for driving 42-57 two-phase and four-phase hybrid stepping motors, which can achieve low vibration, low noise and high speed driving effect.
【USB Mach3 Motion Control Card】 (1) This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify (Notice: Doesn't support Win8/win10/macOS system !!!) .
(2)4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives; (3) Signal Output:0-10V, it can control the spindle motor speed through using mach3 software.
【DC Switching Power Supply】The DC voltage of this 350W switching power supply with rated power is 24V, rated current is 14.5A; ripple and noise are 150mVp-p, voltage adjustable range is ±10%, voltage accuracy is ±1.0%, linear adjustment rate And load regulation rate are both ±0.5%. Start-up time: 200ms, 50ms/230VAC; 2000ms, 50ms/115VAC (at full load).

Rank No. #5

EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping

This driver is an upgraded version of TB6600 and with plastic cover.
The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.

Rank No. #6

Arduino Uno Nano 4 Axis Stepper Control CNC Mill G-Code Translator A4988 Compatible Easy to Use and Friendly Software

Runs on almost any PC which has : WIN 10, 8, 7, XP, Millenium, NT 2K, 98. Low PC CPU loading, that do not hang or overload your PC, so you can use your PC to perform other tasks.
Load your g-code and start machining. Easy straight forward operation. Quick configuration for many cnc type. Simple configuration for custom cnc.
When powering down record position of cnc x,y,z,w; so it does not loose cnc machine position at start up. Integrated firmware to easily program Arduino Nano/Uno.
Hints to help and guide during operation plus tutorial videos all embedded in the software. Up to 16 khz operation for precise stepper motor motion.
Jogging on all 4 axis x, y, z, w. 4th axis (w) can be geared to x or y (via g-code) to create surface of revolution. Emergency shutdown for safe operation. Checksum for reliable serial communication.

Rank No. #7

CNCTOPBAOS 4 Axis Nema23 Stepper Motor CNC Kit 270oz-in 76mm 3A Dual Shaft,TB6560 MD430 Driver,Mach3 Control Card Breakout Board 24V DC CNC Controller Kit for CNC Router Engraving Machine

♞【Nema23 Stepper Motor】 23HS8430B Nema23 Stepper Motor / Holding Torque: 270 oz-in ; 180N.cm / Motor Size:57x57x76mm / Phase: 2 phase / Motor Lead : 4-Lead / 1.8° Step Angle / Type:Hybrid
♞【Stepper Motor Driver】TB6560/MD430 Stepper Motor Driver / Current: 3A / Support voltages : 12-34V DC / Step frequency up to 100khz / 2 phases bipolar driver / Full step, half step, eight step and sixteenth step
♞【5 Axis V5 Breakout Board】 Comes with DB25 parallel cable and USB cable ; Support Mach3,KCAM4,EMC2 and other software ; 5-way input interface, you can connect limit switch and stop switch,reset,knife signal;Data transfer speed can up to 10MBit/s
♞【Power supply】350W,24V/14.6A switching power supply; Output Voltage:24V ; Input: 110-120V AC or 220-240V AC
♞【Application】This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.

Rank No. #8

CNCTOPBAOS 4 Axis CNC Kit,Nema23 Stepper Motor CNC Controller Kit,USB Controller Card,with FMD2740C Driver,36V Power Supply,425oz-in 3A Stepper Motor 112mm Dual Shaft,USB CNC Breakut Board

♞【Nema23 Stepper Motor】Step Angle: 1.8°; Current: 3.0A; Holding torque: 425oz-in/ 280Ncm; Shaft: Dual Shaft,Shat diameter: 8mm; Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue
♞【FMD2740C Driver】Input Voltage: DC18-50V; Current: 1.4A-5.6A;Subdivision precision: 400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000 and 25000 optional
♞【4 Axis USB CNC Breakout Board】Card input voltage: 15-36VDC; With remote hand control; USB port,only support USBCNC Software,with a CD,you can download the manual,software and registration code.Support limit switch;0-10V speed control signal,external pause and reset interface etc
♞【400W 36V 11A DC switching power supply】Please flip the side input voltage selector switch to choose the input power supply,support input voltage : AC110V-120V or AC220V-240V;
♞【Support computer system 】Support Win XP/7/8/10 system,if you can not get the activation code on Win 10 or can not get the registration code from the CD,pls let us know,we will help you to solve it and send you the registration code.

Rank No. #9

CNCTOPBAOS 4 Axis USB Mach3 Controller Board,Blue 4-axis Linkage MACH3 Motion Control Card,CNC Stepper Motor Driver Controller Breakout Board 4-Inputs for CNC Router Milling Engraving Machine

♞【4 Axis USB Mach3 Control Board】USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface.As long as Mach3 can run,the control card can be used; Support computer system:Windows XP/7/8/10.
♞【4 Axis Linkage】Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;One status LED, indicate connection status on the board.
♞【Output Signal Ports】Have 0-10V signal output,you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;Support for connecting electronic handwheel MPG;
♞【Input Signal Ports】4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device; Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
♞【Applications】CNC Router,Milling Machine,Engraving Machine,Carving Machines,Cutting industry,Medical equipment,industrial equipment and automation devices etc.

Rank No. #10

TB6600 4A Stepper Motor Driver CNC Controller, Driver Controller Board for CNC 4-Axis 2 Phase Nema Stepper Motor for CNC, Motor Driver Board

This driver board adopts of a new type of polar double-constant current chopper technology
The motor driver board has the automatic half-current function
The maximum input pulse frequency is 150KHZ
Support the following subdivision selections: 1, 1/2, 1/4, 1/8 and 1/16
It has the stepless adjustable function of current 0.5~4A

Last update on 2023-09-06 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best 4 Axis Stepper Motor Controller?

Do you get stressed out thinking about shopping for a great 4 Axis Stepper Motor Controller? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 4 Axis Stepper Motor Controller, which is why we have assembled a comprehensive list of the greatest 4 Axis Stepper Motor Controller available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 4 Axis Stepper Motor Controller that you consider buying. Your questions might include the following:

Is it worth buying an 4 Axis Stepper Motor Controller?
What benefits are there with buying an 4 Axis Stepper Motor Controller?
What factors deserve consideration when shopping for an effective 4 Axis Stepper Motor Controller?
Why is it crucial to invest in any 4 Axis Stepper Motor Controller, much less the best one?
Which 4 Axis Stepper Motor Controller are good in the current market?
Where can you find information like this about 4 Axis Stepper Motor Controller?

We’re convinced that you likely have far more questions than just these regarding 4 Axis Stepper Motor Controller, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 4 Axis Stepper Motor Controller, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 4 Axis Stepper Motor Controller. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 4 Axis Stepper Motor Controller buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 4 Axis Stepper Motor Controller currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of 4 Axis Stepper Motor Controller has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an 4 Axis Stepper Motor Controller?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your 4 Axis Stepper Motor Controller.
Customer Ratings: Number ratings grade 4 Axis Stepper Motor Controller objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 4 Axis Stepper Motor Controller.
Product Quality: You don’t always get what you pay for with an 4 Axis Stepper Motor Controller, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an 4 Axis Stepper Motor Controller is should be an indication of how long it will work out for you.

We always remember that maintaining 4 Axis Stepper Motor Controller information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 4 Axis Stepper Motor Controller is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best 4 Axis Stepper Motor Controller of 2022 – Reviewed and Top Rated

How Do You Buy The Best 4 Axis Stepper Motor Controller?

Related Post: