The Best 5V Latching Relay of 2025 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best 5V Latching Relay of 2025. Check our ranking below.
2,471 Reviews Scanned
- Using double-panel design PCB; MCU control, stable and reliable performance, strong anti-interference, will not trigger by mistake, superior performance than CD4013;
- With high-power regulator to provide adequate and stable voltage, and have enough cooling holes to ensure long-term stable and reliable products work;
- With anti-power reverse diode protection, a short time reverse power supply without any damage to the product;
- The use of genuine Songle relay control load, 250V 10A (AC) and 30V 10A (DC) under the load can withstand;
- Triggering can also be an external trigger switch, the product is equipped with a good seat and lead wire, more convenient to use.
- If you are looking for a latching relay with power-off memory, then this module will be very suitable for you. Even if the power supply is turned off, the status of the output switch will not be affected in any way, it will remain in the state before the power was turned off.
- This is a simple and practical latching relay module, which is very convenient to use. It can support both Normally Open and Normally Close. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw. Compact plastic case and wires connects for easy mount.
- Support three input control modes: 1, Use Set and Reset buttons on the module(No external control switch or signal is required). 2, External Set and Reset button(Support Momentary-action switch, but can't support Self-holding switch). 3, for Sink/NPN output controller.
- Operating voltage version: DC 5V, 12V and 24V three versions selectable. Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (for one switch).
- Pin:10 Pins
- Contact form:2CO (DPDT)r
- Contact rating:1A 125VAC / 2A 30VDC
- Contact material:Ag-AuAg8
- Operate/release:4ms/3ms
- 5V Relay Module: Working Voltage: DC 5V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger.
- Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
- Relay coil resistance 250?, coil voltage 5V, contact structure DPDT, mounting type PCB, operating temperature -40 to +85°C switching current 2A, switching power 90W.
- Flame-retardant plastic housing and high-conductivity copper alloy contacts are used to improve safety and service life.
- Single coil self-holding design, which can maintain the state after triggering without continuous power supply, is suitable for energy-saving applications.
- Relay size: 7.5*15*12mm, small size, suitable for space-constrained electronic equipment, such as communications, industrial instruments.
- The relay is suitable for home appliance control panels, intelligent control systems, microprocessor control circuits and other occasions.
- ★ F1100% brand new and high quality.
- ★ Contact rating:1A 125VAC / 2A 30VDC
- ★ Contact material:Ag-AuAg8
- ★ Operate/release:4ms/3ms
- ★ Coil consumption:150mW
- Press the trigger button, the relay is locked and locked, press again, the relay is disconnected, and the external switch can be touched and triggered with a low level.
- Widly use: Household appliance control, home lighting control, factory equipment control, for the control of various small current control high voltage and high power products.
- With anti-power reverse diode protection, a short time reverse power supply without any damage to the product;
- The use of genuine Songle relay control load, 250V 10A (AC) and 30V 10A (DC) under the load can withstand;
- Triggering can also be an external trigger switch, the product is equipped with a good seat and lead wire, more convenient to use.
- 【High Performance 】:This switch latching relay is a 4 channel flip-flop relay, and low pulse module.
- 【Self-Locking Relay Module 】:This is a bistable (self-locking) relay module, once, the relay pull (and holds); again, the relay releases (and holds).
- 【Typical Applications】: Automotive electronics, motor, LED, smart home, emergency lighting, MCU development board, toy car.
- 【How to Use】USE 1:By default, the relay is release, press the button, the relay pull, press again, the relay release, the third press, the relay pull, and so onUSE 2:By default, the relay is release, MCU output low-pulse(0.3-1seconds), the relay pull, low-pulse again, the relay release, the third low-pulse, the relay pull, and so on.
- 【High Quality】:Adopted of high quality electronic components, and process, ensure for the durability,No noise was made during turning on/off, no spark, and no electromagnetic interference.
- Product Name: PCB Relay 5V, DPDT, 2NO 2NC
- 8 Pin, DC 5V Coil, 1A 125VAC/2A 30VDC
- High quality Hui-Kes Brand. The 5V pcb relay fit into a standard IC socket so ou dont need a special socket, and the mini relays great for low-power projects
- Long operational life. Compact and sealed construction. The 5v dc relay can automatically adjust, protect and transform the circuit
- Quantity:12 pcs, Professional relay anti-static packaging
- 1. IEC 60947-1 Compliant Terminal Block Torque-controlled screw clamp (0.5-1.2Nm) with VDE 0611-1 certified cage clamp design
- 2. AgSnO2 Contact Material Silver-tin oxide alloy contacts (EN 60128-1) with <50mΩ contact resistance @10A
- 3. SPDT Contact Configuration Single-pole dual-throw (EN 60664-3) with 0.5mm contact gap
- 4. 10A/250VAC Switching Capacity UL 508 & IEC 60947-5-1 certified (AC-15 250V / DC-13 30V)
- 5. IP20 Protected DIN Rail Mount EN 60715-compliant 35mm rail mounting with integrated arc chamber
Last update on 2026-03-12 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best 5V Latching Relay?
Do you get stressed out thinking about shopping for a great 5V Latching Relay? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 5V Latching Relay, which is why we have assembled a comprehensive list of the greatest 5V Latching Relay available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 5V Latching Relay that you consider buying. Your questions might include the following:
- Is it worth buying an 5V Latching Relay?
- What benefits are there with buying an 5V Latching Relay?
- What factors deserve consideration when shopping for an effective 5V Latching Relay?
- Why is it crucial to invest in any 5V Latching Relay, much less the best one?
- Which 5V Latching Relay are good in the current market?
- Where can you find information like this about 5V Latching Relay?
We’re convinced that you likely have far more questions than just these regarding 5V Latching Relay, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 5V Latching Relay, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 5V Latching Relay. Make sure that you are only using trustworthy and credible websites and sources.
We provide an 5V Latching Relay buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 5V Latching Relay currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 5V Latching Relay has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 5V Latching Relay?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 5V Latching Relay.
- Customer Ratings: Number ratings grade 5V Latching Relay objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 5V Latching Relay.
- Product Quality: You don’t always get what you pay for with an 5V Latching Relay, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 5V Latching Relay is should be an indication of how long it will work out for you.
We always remember that maintaining 5V Latching Relay information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 5V Latching Relay is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.