Skip to content

The Best Nodemcu Battery of 2025 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Nodemcu Battery of 2025. Check our ranking below.

2,078 (random) Reviews Scanned

Rank No. #1
MakerHawk 3.7V 3000mAh LiPo Battery Rechargeable 1S Lithium Polymer Battery with Protection Board Insulated Rubber Tape, Micro JST 1.25 Plug for Arduino NodeMCU ESP32 Development Board (4 Pack)
  • MakerHawk adopts a brand-new A-grade lithium cobalt oxide battery system, which, compared to ternary system batteries, not only provides higher energy and higher density but also ensures more stable discharge performance and longer lifespan. It also complies with UN 38.3 standards certification, ensuring safety and reliability.
  • Over-Discharge Protection: When the battery is about to deplete, and the voltage drops to 3.0V, the protection circuit will shut down, preventing further discharge and providing over-discharge protection.
  • Over-Charge Protection: During battery charging, when the voltage reaches the maximum battery voltage (4.2V), the protection circuit will automatically cut off power, indicating that the battery is fully charged and providing over-charge protection.
  • Short Circuit Protection: In the event of a short circuit, the protection circuit will automatically shut down within milliseconds and will not power on again. Note that if the battery is short-circuited (bypassing the protection circuit), the protection circuit may also fail due to prolonged high current or component overheating.
  • Storage & Usage: During long-term storage, keep the battery charged between 40% and 60%. We recommend charging the battery once every 3 months after receiving it, maintaining a voltage of 3.7-4.0V. Store the battery in a cool, dry place.
Rank No. #2
KBT 3.8V 2000mAh Li-Polymer Battery: 754444 Lipo Rechargeable Lithium-ion Replacement Batteries with JST Connector for Ar duino NodeMCU ESP32 Development Board Raspberry Pi UPS Board
  • 754444 Lithium polymer battery: 3.8V 2000mAh , batteries comes with JST connector, very convenience to use.
  • Certified quality: Each lithium battery pass safety examination before they leave the facotry. They must pass UN38.3 test standards such as low-high temperature test, impact test, over charging, external short circuit, vibration test etc. It will lower down the risk caused by accident to minumum in production, shipping and your using period.
  • Wide useage: the battery fit for digital cameras, tablet, home monitor, GPS,toys, Network Box,USB Fan,Tester,air Purifier,controller,bluetooth speaker baby infant monitor, keyboard and mouse etc
  • Long life-time: With about 800 times charge and discharge cycles,the battery can work for 1-2 year in normal using. If you don't use the battery often, please running out the battery capacity and full charging the battery once a month.
  • Life time warranty: Every battery from us is of guaranteed quality for life-time. If you have any probelms with the product (caused by product itself), please contact with us for replacement or refund any time.
Rank No. #3
Nzzz 4pcs 3.7V 3200mAh 1S 1C Battery JST 1.25 Plug for ESP32/Arduino/NodeMCU/Mesh Node T114 for Arduino ESP32 Development Board Speaker Wireless Device, Ni-MH
  • Versatile Applications: Perfect for ESP32 projects, small IoT (Internet of Things) projects, Bluetooth speakers, keyboards, Wi-Fi smart home systems, digital cameras, e-books, tracking devices, and wireless electronics. NOTE: Maximum operating current is only about 1.5A – NOT suitable for drones, model aircraft, or other products requiring high current
  • Reliable Performance: 3.7V rechargeable battery with no leakage, long cycle life, and comprehensive PCM protection (overcharge, over-discharge, over-current, short-circuit, and over-temperature protection). Complies with UN 38.3 certification for safe and reliable use
  • 3200mAh High Capacity: Ideal battery for development board projects. Recommended charging current: 0.2A (max 1A); recommended discharge current: 0.5A (max 1A). Equipped with MOS tube on the protection board, instantaneous overcurrent protection: 1.6–2.2A; recommended charging voltage: 4.2V
  • Detailed Specifications: Dimensions: 65×36×10mm / 2.64×1.41×0.39inch; Weight: 50g; Capacity: 3200mAh; Voltage: 3.7V; Plug: JST 1.25; Discharge Rate: 1C. WARNING: RED wire of the connector is positive (+), BLACK wire is negative (-) – Confirm connector polarity with your device before connection!
  • Storage & Usage Guidelines: For long-term storage, keep the battery at 40%-60% charge. It’s recommended to charge the battery every 3 months after receipt and maintain voltage between 3.7V–4.0V. Store in a cool, dry place
Rank No. #4
OCTelect 2PCS Lithium Ion Battery 1100mAh Vivan-Star Ar d ui no Nodemcu ESP32 Development Board Protective Board Insulated Rubber Tape 3.7V 1100mAh Lithium Rechargeable Battery 1S 3C Lipo Battery
  • [Battery size]: 5.8mm * 20mm * 37mm (T * W * L)
  • [Applicable equipment]:2 Lithium Ion Battery 1100mAh Vivan-Star Ar d ui no Nodemcu ESP32 Development Board Protective Board Insulated Rubber Tape Micro JST 1.25 With Plug 3.7V 1100mAh Lithium Rechargeable Battery 1S 3C Lipo Battery
  • [Features]: Lithium-ion battery nominal voltage 3.7V, fully charged 3.7V, capacity 80mAh. Built-in Seiko battery protection module to prevent overcharging and short circuit of this battery
  • [Connector type]: Jst pitch 1.25 mm, 2 pins, wire length: 50 mm
  • [Notice]: Check the polarity of the battery against the old battery before replacing it. Red wire connection power supply plus "+", black wire connection power supply negative pole "-". If is reversed, the position of the interchange wire is required.
Rank No. #5
1pcs for WeMos D1 Esp-Wroom-02 Motherboard ESP8266 Mini-WiFi Nodemcu Module 18650 Battery
  • 1pcs For WeMos D1 Esp-Wroom-02 Motherboard ESP8266 Mini-WiFi Nodemcu Module 18650 Battery
Rank No. #6
AKZYTUE 3.7V 3000mAh 103665 LiPo Battery Pack, 1S Rechargeable Lithium Polymer Battery with PCM Protection, Micro JST 1.25mm 2-Pin Plug for ESP32 Arduino NodeMCU,Miyoo Mini V4 and Mini Plus
  • 【Size & Battery Specs】103665 lithium polymer rechargeable battery pack, DC 3.7V / 3000mAh (11.1Wh). Max charge voltage: 4.25V. Battery size: 10 × 35 × 68mm (0.39" × 1.38" × 2.67") (T×W×L), net weight approx. 50g, with 5cm / 2" wire lead—designed for stable output and longer runtime in portable electronics, wireless devices, and DIY power projects.
  • 【Micro JST 1.25mm 2-Pin Connector】Built with a Micro JST 1.25mm 2-pin plug for quick installation and a secure connection. Great for devices that use a 1.25mm battery port. Please confirm connector type, plug shape, and polarity before ordering.
  • 【Must Confirm Before Purchase】Not universal. Please verify before purchase: (1) battery size and thickness, (2) connector type: Micro JST 1.25mm 2-pin, (3) plug direction/shape, (4) wire polarity (+/−). Wrong connector or reversed polarity may cause your device not to power on or may damage the circuit.
  • 【Built-in PCM Safety Circuit】Built-in PCM protection provides over-charge, over-discharge, over-current, and short-circuit protection. Helps improve charging safety, supports stable charging cycles, and extends the service life of both the battery and your device.
  • 【Wide Applications for DIY & Wireless Devices】Suitable for 3.7V rechargeable devices such as Bluetooth speakers, GPS trackers, monitoring modules, smart home systems, portable electronics, and DIY projects like ESP32 / Arduino / NodeMCU power supply applications requiring longer runtime.
Rank No. #7
AKZYTUE 3.7V 1000mAh 102050 LiPo Battery Pack, 1S Rechargeable Lithium Polymer Battery with PCM Protection, Micro JST 1.25mm 2-Pin Plug for ESP32 Arduino NodeMCU
  • 【Size & Battery Specs】102050 lithium polymer rechargeable battery pack, DC 3.7V / 1000mAh (3.7Wh). Max charge voltage/current: 4.25V / 500mA. Battery size: 10 × 20 × 50mm (0.39" × 0.79" × 1.97") (T×W×L). Net weight: 19g. Includes a 5cm / 2" wire lead for easy installation.
  • 【Micro JST 1.25mm 2-Pin Connector】Built with a Micro JST 1.25mm 2-pin plug for quick and secure connection. Great for devices and development boards that use a 1.25mm battery port. Please confirm connector type, plug shape, and polarity before ordering.
  • 【Must Confirm Before Purchase】Not universal. Please verify before purchase: (1) battery size 10×20×50mm, (2) connector type: Micro JST 1.25mm 2-pin, (3) plug direction/shape, (4) wire polarity (+/−). Wrong connector or reversed polarity may cause your device not to power on or may damage the circuit.
  • 【Built-in PCM Protection】Built-in PCM safety circuit provides over-charge, over-discharge, over-current, and short-circuit protection. Helps improve charging safety, reduces the risk of battery damage, and delivers stable power output for long-term use.
  • 【Wide Applications for DIY & Wireless Devices】Ideal replacement battery for 3.7V rechargeable devices such as GPS trackers, wireless modules, ESP32 / LoRa development boards, Bluetooth accessories, smart home mini modules, monitoring sensors, portable electronics, and other 1S LiPo battery-powered DIY/IoT applications.
Rank No. #8
MakerFocus 2pcs 3.7V 3000mAh Lithium Polymer Rechargeable Battery 1S LiPo Battery with Protection Board Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board, Mesh Node T114
  • Charging Method: The recommended charging current is 0.6A, the maximum does not exceed 1.5A. The discharge current is recommended 0.6A, and the maximum does not exceed 1.5A
  • Overcharge Protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged, forms overcharge protection
  • Over-discharge Protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect
  • Short Circuit Protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous high current, or the components are heated and damaged
  • Widely Application: With JST 1.25 plug, these lithium polymer batteries can be used for development board whose plug is SH1.25-2, such as ESP32 LoRa V3, ESP32 LoRa V4, Wireless Tracker, Mesh Node T114, Mesh Node T096 and electronic devices
Rank No. #9
AKZYTUE 3.7V 1000mAh 803040 LiPo Battery Pack, 1S Rechargeable Lithium Polymer Battery with PCM Protection, Micro JST 1.25mm 2-Pin Plug for ESP32 Arduino NodeMCU
  • 【Size & Battery Specs】Lithium polymer rechargeable battery pack, DC 3.7V / 1000mAh (3.7Wh). Max charge voltage/current: 4.25V / 500mA. Battery size: 40 × 30 × 7.8mm (1.57" × 1.18" × 0.31") (T×W×L), lightweight 18g, with 5cm / 2" wire lead—ideal for mid-size electronics, smart devices, and DIY projects.
  • 【Micro JST 1.25mm 2-Pin Connector】Built with a Micro JST 1.25mm 2-pin plug for quick installation and a secure connection. Designed for devices that use a 1.25mm battery port. Please confirm connector type, plug shape, and polarity before ordering.
  • 【Must Confirm Before Purchase】Not universal. Please verify before purchase: (1) battery size 40×30×7.8mm, (2) connector type: Micro JST 1.25mm 2-pin, (3) plug direction/shape, (4) wire polarity (+/−). Wrong connector or reversed polarity may cause your device not to power on or may damage the circuit.
  • 【Built-in PCM Safety Circuit】Built-in PCM protection provides over-charge, over-discharge, over-current, and short-circuit protection. Helps improve charging safety, supports stable charging cycles, prevents leakage, and extends the service life of both the battery and your device.
  • 【Wide Applications for DIY & Wireless Devices】Suitable for 3.7V rechargeable devices such as GPS trackers, Bluetooth accessories, wireless modules, smart home mini systems, monitoring sensors, portable electronics, and DIY projects like ESP32 / Arduino / NodeMCU power supply applications.
Rank No. #10
MakerFocus 4pcs 3.7V 1100mAh Lithium Polymer Battery 1S LiPo Rechargeable Battery with Protection Board, Insulated Rubber Tape and JST 1.25 Plug for ESP32 Development Board, Mesh Node T114
  • Overcharge Protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged, form an overcharge protection
  • Over-discharge Protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect
  • Short Circuit Protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous high current, or the components are heated and damaged
  • Charging Method: Recommended charging current is 0.22A, with a maximum of 0.55A. Recommended discharge current is 0.22A, the maximum is no more than 0.55A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V
  • Widely Application: With JST 1.25 plug, these lithium polymer batteries can be used for development board whose plug is SH1.25-2, such as ESP32 LoRa V3, ESP32 LoRa V4, Wireless Tracker, Mesh Node T114, Mesh Node T096 and electronic devices

Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Nodemcu Battery?

Do you get stressed out thinking about shopping for a great Nodemcu Battery? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Nodemcu Battery, which is why we have assembled a comprehensive list of the greatest Nodemcu Battery available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Nodemcu Battery that you consider buying. Your questions might include the following:

  • Is it worth buying an Nodemcu Battery?
  • What benefits are there with buying an Nodemcu Battery?
  • What factors deserve consideration when shopping for an effective Nodemcu Battery?
  • Why is it crucial to invest in any Nodemcu Battery, much less the best one?
  • Which Nodemcu Battery are good in the current market?
  • Where can you find information like this about Nodemcu Battery?

We’re convinced that you likely have far more questions than just these regarding Nodemcu Battery, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Nodemcu Battery, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Nodemcu Battery. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Nodemcu Battery buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Nodemcu Battery currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Nodemcu Battery has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Nodemcu Battery?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Nodemcu Battery.
  5. Customer Ratings: Number ratings grade Nodemcu Battery objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Nodemcu Battery.
  7. Product Quality: You don’t always get what you pay for with an Nodemcu Battery, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Nodemcu Battery is should be an indication of how long it will work out for you.

We always remember that maintaining Nodemcu Battery information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Nodemcu Battery is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: