The Best Mercedes Multiplexer of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Mercedes Multiplexer of 2022. Check our ranking below.
2,879 Reviews Scanned
Rank No. #1
iCarsoft Benz-38 PIN Diagnostic Adapter for Benz OBD I Multi Systems diagnose
- Only used for OBD I Benz vehicles.
- Covered chassis: 107, 124, 126, 201,202,210,208,170,129.
- The Benz 38 pin adapter allows you to connect a Benz vehicle with a OBD1 38 pin socket with your existing 16 pin OBD2 tool.
- Utilized eco-friendly material, reduce environmental pollution.
Rank No. #2
iCarsoft Genuine Mercedes Benz I980 Professional Diagnostic Scanner Tool
- iCarsoft i980 can do it all-reads and clears trouble codes for Mercedes on full systems such as engine, transmission, ABS and airbag etc.
- Support OBD II/EOBD ten modes of operation full ecu diagnosis test modes include: CANBUS, ISO9141, KWP2000, J1850 etc.. Read & Clear DTCs Read live data stream
- OBD II function for all OBD II/EOBD compliant vehicles: I/M Readiness, Data Stream, Freeze Frame, O2 Sensor Test, Evap System Test, Turn off Check Engine Light (MIL)…
- Lifetime free update Upgrade via USB 2.0 one year warranty Support Multi-language
Rank No. #3
Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module For Arduino
- This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx).
- It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.
- To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!
- Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc.
- The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).
Rank No. #4
SZSS-CAR OBD OBD2 Connector Diagnostic Adapter for Mercedes-Benz 16 pin to 38 pin Connector (BENZ-16T38)
- OBD OBD2 Connector Diagnostic Adapter for Mercedes-Benz BMW Fiat GM Honda
- This adapter is designed for multiplexer use or VCI (eg Delphi, Autocom, Launch etc.)
- Combined with suitable equipment this adapter will provide access to all vehicle systems: engine, Airbag, ABS, Climate control etc.
- Before you buy, pls confirm if the connector adapter in the photos is fit for your requirement.
- Brand new with good quality
Rank No. #5
12Pcs CD74HC4067 16-Channel Analog Digital Multiplexer MUX Breakout Board Module CD74HC4067 CMOS Precise Module Compatible with DIY
- CD74HC4067 board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer, use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels; Analog output: DIG; Channel control: S0-S3
- It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc.
- The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).
- To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins.
- Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to.
Rank No. #6
Jeyaic 3 in 1 ELV Steering Wheel Lock Electric Motor,Direction Lock Motor Lock Disassembler Pin Disassembler for Mercedes Benz Ignition Lock Dowel Pin Removal Tool Kit
- ★【Excellent Quality】The unit we recommended can be used to replace the broken benz sheering lock motor which contains a screwdriver, a EZS/ EIS/ BGA Lock Removal Tool and a lock motor.Noiseless, power enough solid, durable and superior quality.
- ★【Wide Application】The wheel lock (ELV/ESL) of Mercedes-benz , like W204, W207 and W212 can be easily broken, including all C-series E-series and GLK from 2006 to 2014 (C180, C200, C280, E200, E260, E320, E350, GLK200, GLK300 GLK350).
- ★【Easy to Install】Easy to install and store, try to put it in a sealed bag to prevent the unit from rusting when not in use.100% Brand new and High quality.
- ★【Quality Assurance】If you encounter any problems when you receive the item, please contact me in time, I will be happy to help you.
- ★【Package Including】1* Motor Wheel Steering Lock,1* Motor pin extractor tool,1* Removal tool.
Rank No. #7
QCCAN 12PCS CD74HC4067 16-Channel Analog Digital Multiplexer Breakout Board Module 2V-6V
- This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
- Function: Use 16 ADCs to collect 16 analog signals. Use the CD74HC4067 16-channel analog signal switch.
- .Analog Input: C0-C15 16 channels; Analog output: DIG; Channel Control: S0-S3
- This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction.
- A method for controlling the motor, lights, LED, DC motors, micro-pumps, solenoid valves, etc., very convenient.
Rank No. #8
HiLetgo CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino
- Function: Use 16 ADCs to collect 16 analog signals.
- Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
- Analog output: DIG;Channel control: S0-S3
- This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
- This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction.
Rank No. #9
Adafruit TCA9548A I2C Multiplexer
- Finally, a way to get up to 8 same-address I2C devices hooked up to one microcontroller - this multiplexer acts as a gatekeeper, shuttling the commands to the selected set of I2C pins with your command.
- Using it is fairly straight-forward: the multiplexer itself is on I2C address 0x70 (but can be adjusted from 0x70 to 0x77) and you simply write a single byte with the desired multiplexed output number to that port, and bam - any future I2C packets will get sent to that port. In theory, you could have 8 of these multiplexers on each of 0x70-0x77 addresses in order to control 64 of the same-I2C-addressed-part.
- Like all Adafruit breakouts, we put this nice chip on a breakout for you so you can use it on a breadboard with capacitors, and pullups and pulldowns to make usage a snap. Some header is required and once soldered in you can plug it into a solderless-breadboard. The chip itself is 3V and 5V compliant so you can use it with any logic level.
Rank No. #10
DEVMO 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board CD74HC4067 Precise Module Compatible with Ar-duino DIY
- ★This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
- ★2V to 6V operation
- ★6ns break-before-make @ 4.5V,"On" resistance: 70 Ohms @ 4.5V
- ★Wide operating temperature range: -55C to 125C
- ★Package Includes: 1PCS 16 Ch. Mulitplexer,2PCS Header Pins as shown above
Last update on 2024-03-25 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Mercedes Multiplexer?
Do you get stressed out thinking about shopping for a great Mercedes Multiplexer? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Mercedes Multiplexer, which is why we have assembled a comprehensive list of the greatest Mercedes Multiplexer available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Mercedes Multiplexer that you consider buying. Your questions might include the following:
- Is it worth buying an Mercedes Multiplexer?
- What benefits are there with buying an Mercedes Multiplexer?
- What factors deserve consideration when shopping for an effective Mercedes Multiplexer?
- Why is it crucial to invest in any Mercedes Multiplexer, much less the best one?
- Which Mercedes Multiplexer are good in the current market?
- Where can you find information like this about Mercedes Multiplexer?
We’re convinced that you likely have far more questions than just these regarding Mercedes Multiplexer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Mercedes Multiplexer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Mercedes Multiplexer. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Mercedes Multiplexer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Mercedes Multiplexer currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Mercedes Multiplexer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Mercedes Multiplexer?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Mercedes Multiplexer.
- Customer Ratings: Number ratings grade Mercedes Multiplexer objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Mercedes Multiplexer.
- Product Quality: You don’t always get what you pay for with an Mercedes Multiplexer, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Mercedes Multiplexer is should be an indication of how long it will work out for you.
We always remember that maintaining Mercedes Multiplexer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Mercedes Multiplexer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.