Skip to content

The Best Bluetooth Interface Module of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Bluetooth Interface Module of 2022. Check our ranking below.

2,046 (random) Reviews Scanned

Rank No. #1
ACEIRMC 4pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid.
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g.
  • HC-06 Bluetooth Serial Pass-Through Module Wireless Serial Communication Compatible for Arduino
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect.
Rank No. #2
HiLetgo 2pcs CC2540 CC2541 AT-09 Serial Wireless Module BLE 4.0 Bluetooth Module Compatible HM-10
  • Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible.
  • It adopts CC2541 chip of American TI Company, configures 256Kb space, and follows V4.0 BLE Bluetooth specification.
  • Input voltage: 3.3V/5V only needs a set of power supply.
  • This module supports UART interface and supports SPP Bluetooth serial port protocol.
  • Compatible HM-10
Rank No. #3
HiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid.
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g.
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect.
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices.
Rank No. #4
3.5MM AUX USB Interface Bluetooth Module Receiver Cable Adapter for BMW Car Wireless A2DP Audio Input for Peugeot/Hyundai/kia
  • Compatible with :All Vehicles have AUX USB Interface , the AUX Port provides audio , and USB port support 5V.
  • The bluetooth module is made for BMW Peugeot VW ect vehicles which has 3.5mm AUX and USB Interface.
  • If there is 3.5mm AUX and USB socket,our bluetooth module will work.
  • Just plug the AUX connector into the socket back of your radio.
  • Pair your phone or mp3 or pad with bluetooth to the module, this name: jierui5908.
Rank No. #5
YuYue AMI MDI MMI Interface Bluetooth Module AUX Receiver Cable Adapter for Audi VW Radio Stereo Car Wireless A2DP Audio Input(MMI 3G)
  • The bluetooth module is made for Audi/VW vehicles which has AMI MMI MDI system.If there is AMI MMI MDI socket,our bluetooth module will work.
  • Just plug the AMI connector into the socket back of your radio.It is bluetooth 4.0 version, not need password when connecting.
  • Choose AUX from your radio and you can play music from your phone in your car.
  • Match your phone or pad to bluetooth module.and Choose Aux from your radio, then you can use your phone to play music through car speakers.
  • You can hear music from your phone/pad/mp3(They should have blueooth function).Please confirm if your car is MMI 3G system before purchase.
Rank No. #6
HiLetgo HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino
  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED.
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode.
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board
Rank No. #7
AITRIP 5pcs ESP32-CAM-MB WiFi Bluetooth Development Board OV2640 Camera Module Micro USB Interface CH340G USB to Serial Port auto Download for Arduino
  • HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
  • it is new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz
  • Application: Home smart device image transmission; Wireless monitoring ;Smart agriculture ;QR wireless recognition; Wireless positioning system signal and so on.
  • Low power consumption: deep sleep current is as low as 6mA; It is a small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • 5PCS ESP32-CAM WiFi Bluetooth Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module
Rank No. #8
HC-05 Wireless Bluetooth Receiver RF Transceiver Module Serial Port Transmitter Module
  • VCC: positive power supply?
  • GND: power supply is negative?
  • RXD: the receiver, Bluetooth module receives from another device sent data; normally connected to other devices transmitting end TXD?
  • TXD: sending end, the Bluetooth module to send data to other devices; receiving terminal is normally connected to other devices RXD
  • Brand new and high quality
Rank No. #9
Replacement Wireless Bluetooth WiFi Card Module Board with Antenna Cable for Xbox One Pulled
  • Brand New , High Quality.
  • Replace the WIFI Module, it Can Solve the Wireless Controller Disconnected (Broken) Problem.
  • Original and Pulled From Microsoft Xbox One Coonosle.
  • If Your Controllers Don't Sync, Or If Wifi Access Points No Longer Show Up Then This Could Be the Part You Need.
  • Package Includes: 1 x Card Module, 1 x Antenna Cable.
Rank No. #10
Digital Audio Workstation
  • Colby N. Leider (Author)
  • English (Publication Language)
  • 368 Pages - 07/16/2004 (Publication Date) - McGraw Hill TAB (Publisher)

Last update on 2023-09-17 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Bluetooth Interface Module?

Do you get stressed out thinking about shopping for a great Bluetooth Interface Module? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Bluetooth Interface Module, which is why we have assembled a comprehensive list of the greatest Bluetooth Interface Module available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Bluetooth Interface Module that you consider buying. Your questions might include the following:

  • Is it worth buying an Bluetooth Interface Module?
  • What benefits are there with buying an Bluetooth Interface Module?
  • What factors deserve consideration when shopping for an effective Bluetooth Interface Module?
  • Why is it crucial to invest in any Bluetooth Interface Module, much less the best one?
  • Which Bluetooth Interface Module are good in the current market?
  • Where can you find information like this about Bluetooth Interface Module?

We’re convinced that you likely have far more questions than just these regarding Bluetooth Interface Module, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Bluetooth Interface Module, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Bluetooth Interface Module. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Bluetooth Interface Module buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Bluetooth Interface Module currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Bluetooth Interface Module has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Bluetooth Interface Module?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Bluetooth Interface Module.
  5. Customer Ratings: Number ratings grade Bluetooth Interface Module objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Bluetooth Interface Module.
  7. Product Quality: You don’t always get what you pay for with an Bluetooth Interface Module, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Bluetooth Interface Module is should be an indication of how long it will work out for you.

We always remember that maintaining Bluetooth Interface Module information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Bluetooth Interface Module is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: