The Best Camera Cage of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Camera Cage of 2022. Check our ranking below.
2,485 (random) Reviews Scanned
Rank No. #1
SmallRig Full Camera Cage for Sony Alpha 7R V / Alpha 7 IV / A7R IV / Alpha 7 S III / Alpha 1 - 3667B
- Improved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286; 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories.
- For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V.
- Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428.
- Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV
- All-Round Protection: Built-in all-round rubber gasket to prevent scratches. With the cage installed, the camera interface, dials, buttons and changing batteries are not affected. The opening and closing wrench design is added to the position of the battery compartment, which fits the curve of the fuselage more, solves the problem of placing the little finger, and enhances the grip of the fuselage.
Rank No. #2
NEEWER Camera Video Cage Film Movie Making Kit, Aluminum Alloy with Top Handle, Dual Hand Grip, Two 15mm Rods, Compatible with Canon Sony Fujifilm Nikon DSLR Camera and Camcorder (Black + Blue)
- 【Wide Compatibility】 This NEEWER universal camera cage is widely compatible with Canon 5D Mark II 5D Mark III 600D 700D Nikon 7200D Sony Fujifilm Pentax and other DSLR cameras and camcorders, ideal for photography enthusiasts, professional photographers, and filmmakers
- 【Complete Accessories】 The camera cage has ergonomic dual handgrips for stable shootings. The silicone top handle can attach to the camera cage for taking low-angle shots. And the integrated dual-rod base with two rods 15mm in diameter and a 60mm rod rail gauge can let you adjust the camera positions and mount accessories like a follow focus, a hood, and a lens support
- 【Convenient Mounting】 The camera cage features a built-in 1/4” thumbscrew that allows you to mount and dismount your camera quickly without tools. The silicone padding stabilizes your camera from wobbling and protects it from scratches
- 【Multiple Mounting Points】 Multiple 1/4” and 3/8” threaded holes on the top of the cage allow for mounting several photographic accessories, including articulating arms, cold shoe mounts, field monitor mounts, and more
- 【High-Quality Material】 With aircraft-grade aluminum alloy material, high-precision CNC machining, and an anodized finish, the camera cage is strong and durable
Rank No. #3
UYODM AntiTheft Camera Mount Cage and Wall Mount Bracket Compatible with Blink Outdoor,Blink Mini,Blink XT2/XT, Blink Outdoor 4 (4th Gen)/(3rd Gen) XT3, YI Camera,Wyze Outdoor,eufycam, Nest Camera
- ✔ ANTI-THEFT DESIGN: We design this anti-theft camera mount Cage aiming to prevent your Blink Security Camera from stealing. Provide a perfectly safe environment for your family.(NOTE:Camera not included).Upgraded version, the product is upgraded from white to black to solve the problem of white reflection at night
- ✔ ANY ANGLE ADJUSTABLE WALL MOUNT : With 360-degree swivel & 90-degree tilt. Which extends 4.7 inches from the mounting surface for better adjustment experience.Allows you to perfectly position the camera to obtain the largest monitoring range
- ✔ STURDY AND DURABLE: Made of high grade metal and high quality Aluminum Alloy, Rust-resistant ,oxidation resistant, Not afraid of rain or sun. perfect for indoor or outdoor use.
- ✔ EASY TO INSTALL: Each Anti-theft Mount cage has 6 Anti-theft screws and wall anchors,it is simple to press the camera in or out on the fixed bracket.You can install your Security camera on the wall, ceiling and anywhere you want .
- ✔ PACKAGE LIST: 1 * 360° Wall Mount + 1 * Metal Anti-theft Cage + 3 * (Screws and Anchors) + 6* (Anti-theft Screws and Anchors)+1*Screwdriver for anti-theft screws
Rank No. #4
CAMVATE Basic Camera Cage Rig with Top Handle Universal Use - 1897
- Basic and simple design, it’s very practical and lightweight
- It’s made of high quality aluminum alloy, CNC-milled
- Array of 1/4"-20 and 3/8"-16 mounting points on the cage rig for attaching accessories
- This basic cage is universally compatible with most cameras less than 124mm in height
Rank No. #5
Filmcity Power DSLR Camera Cage for DSLR DSLM Cameras Only. Adjustable Handles & 15mm Rod Adapter. Tripod Compatible. Comes with Quick-Release Plate (FC-CTH)
- HIGH STRENGTH, ADVANCE QUALITY AND FULLY FUNCTIONAL Camera Cage Ideal for professional or amateur cameraman.
- EASILY ADJUSTABLE IN HEIGHT with the addition of longer rods and allows you to mount variety of accessories
- QUICK RELEASE PLATE allows quick mounting and dismounting of camera. Easy switching of video camera cage from handheld to tripod.
- CAPTURE DYNAMIC LOW ANGLE AND HANDHELD EYE LEVEL SHOTS with proper balance, strength and perfection.
- Upgraded with Technology, Comfort & Quality. Own it to Believe it.
Rank No. #6
Professional DSLR Rig Camera Cage/Follow Focus/Matte Box Bundle for Sony A6000 A6300 A7 A7S A7SII A7R A7RII, Panasonic DMC-GH4 GH4 GH3, Canon M3 M5 M6, Nikon L340 etc
- Matte Box: 15mm / 0.6in rail rod support system, suitable for lens from 43mm to 77mm / 1.7 - 3.0in.
- Follow Focus: completely gear-driven design for slip-free, accurate, and repeatable focus movement. Mounts onto 15mm/0.59" Rod Support (60mm/2.4" center to center difference).
- Camera Cage: Form-fitting and exquisite/Multi-functional/High compatibility/Easy to attach and detach
- Backed with Lightow's 12-Month Return for Refurbish/Replacement Manufacture Warranty.
SaleRank No. #7
SMALLRIG Camera Cage Only for Sony Alpha 7S III / A7S III / A7SIII / A7S3 - 2999
- 【FORMFITTING FULL CAGE】SmallRig A7S III Cage 2999 maintains access to the camera's controls and hot shoe. Made of premium aluminium alloy, the cage is a solid piece of metal that is highly resistant to oxidation and stands the test of time.
- 【PERFECT PROTECTION】The cage incorporates an anti-twist design with an M2.5 screw fixed to the strap hole in addition to the 1/4"-20 camera mounting screw so your camera can't move around in the cage. SmallRig Cage 2999 also incorporates an anti-twist design with padding on the base to protect the camera from scratching.
- 【MULTIPLE MOUNTING POINTS】In addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available lens adapter 1764.
- 【RECOMMENDATIONS】The cage is compatible with SmallRig universal accessory system. You can attach SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle or SmallRig Ball Head Magic Arm.
- 【SWEET DESIGN】Lightweight design with only 200g. Strap holes are included to add a separately available wrist strap or neck strap to your rig. Besides, with built-in magnetic suction design, the included Allen Wrench is ready to use without fear of loss.
Rank No. #8
NEEWER Aluminum Alloy Camera Cage, Filmmaking Rig with Top Handle, Dual Grips & Arca Type Base, Compatible with Sony A7S III A7IV A6600 Canon EOS R5C R5 R6 DSLR/Mirrorless Cameras - VS107, Blue
- 【Universal Camera Cage】 Engineered with premium CNC aluminum alloy, this Neewer camera cage is universally compatible with Canon EOS 90D/ EOS 6D Mark II/, Sony Alpha 7C/ Alpha 7 III/ Alpha 7R IV/ Alpha 9 II/ Alpha 6600, Nikon Z 6/ Z 6Ⅱ/ Z 7/ Z 7Ⅱ, Blackmagic 4K / 6K ,Fujifilm X-T4, Pentax, and other DSLR mirrorless cameras and camcorders up to 33lb/15kg.(This product is not suitable for a lens with support ring, so please remove the support ring before use)
- 【Comprehensive Upgrade】 The upgraded cage features a dual-rod base, two 15mm-diameter rods, and a standard 60mm rail gauge for attaching follow focus, hood, lens support, and other accessories. The non-slip top silicone handle and the two ergonomic handgrips with synthetic leather textures and finger contours offer you a comfortable grip
- 【Diverse Mounting Points】 The top of the cage has numerous 1/4” and 3/8” female threads, cold shoes, and compatible ARRI locating holes for mounting magic arms, cold shoe mount adapters, microphones, field monitors, LED video lights, RGB lights, and other accessories that will facilitate your video shooting in any situation
- 【Easy Camera Installation】 An integrated 1/4” aluminum alloy thumb screw with knurls adds friction for quick, convenient, and tool-free camera installation. The enlarged silicone pad prevents your camera and camcorder from wobbling and protects against scratches
- 【Handheld & Tripod-Mounted】 Grasp the cage with the two contoured handgrips for stable shooting or hold the top silicone handle for low-angle shots. There are two ways to mount the cage on a tripod: (1) Screw it to a quick-release plate via the 1/4” screw holes on the dual-rod base, (2) Remove the dual-rod base and secure the cage directly to the tripod
Rank No. #9
CAMVATE DSLR Camera Cage Top Handle Wood Grip Compatible for Sony Panasonnic - 1175
- Designed to work with:60D,70D,50D,40D,30D,6D,7D,7D, 90D MarkII,5D MarkII,5DMarkIII,5DS,5DSR,650D,600D,550D,500D,450D,760D,750D,700D,100D,1200D,eos M5; D7000,D7100,D7200,D300S,D610,DF,D3200,D3300,D5100,D5200,D5500; Sony A99,A58,A7,A7II,A7RII;Panasonnic G7,GH4,GH3,GH2:Samsung nx1
- Thread Holes for base plate: 1/4"-20;Mounting Hole for base plate: 1/4"-20
- Camera Mount Screw: 1/4"-20;Thread Holes for top plate: 1/4"-20
- Side Pipe Length: one 125mm ,another one 145mm
- Thread Holes for side pipe: 1/4"-20 & 3/8"-16
Rank No. #10
Movo SPR/CR-5 Metal Cage Rig Stabilizer for Mirrorless Camera, DSLR, Smartphone - Dual-Grip Handheld Camera Rig - Two Hand Stabilizer for Video and Film Shoots, Sports Videography, Vlogging, and More
- STABLE CAMERA SUPPORT: Upgrade your camera setup with a sturdy and versatile cage rig for DSLR, mirrorless cameras, and smartphones
- ERGONOMIC CAGE RIG: Dual rubber handgrips keep your camera steady for smooth handheld tracking shots
- FULLY CUSTOMIZABLE: Create any rig you can imagine with two cold shoe mounts and multiple threaded mounts to accommodate any video or photo accessory
- LIGHTWEIGHT DESIGN: The aluminum design is durable, yet lightweight. At just under 7 oz, this camera cage won't add much additional weight to your filming setup
- 1-YEAR WARRANTY: We’ve got your back! Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help
Last update on 2023-02-18 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Camera Cage?
Do you get stressed out thinking about shopping for a great Camera Cage? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Camera Cage, which is why we have assembled a comprehensive list of the greatest Camera Cage available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Camera Cage that you consider buying. Your questions might include the following:
- Is it worth buying an Camera Cage?
- What benefits are there with buying an Camera Cage?
- What factors deserve consideration when shopping for an effective Camera Cage?
- Why is it crucial to invest in any Camera Cage, much less the best one?
- Which Camera Cage are good in the current market?
- Where can you find information like this about Camera Cage?
We’re convinced that you likely have far more questions than just these regarding Camera Cage, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Camera Cage, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Camera Cage. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Camera Cage buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Camera Cage currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Camera Cage has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Camera Cage?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Camera Cage.
- Customer Ratings: Number ratings grade Camera Cage objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Camera Cage.
- Product Quality: You don’t always get what you pay for with an Camera Cage, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Camera Cage is should be an indication of how long it will work out for you.
We always remember that maintaining Camera Cage information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Camera Cage is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.