The Best cpu fan hub of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best cpu fan hub of 2022. Check our ranking below.
2,209 (random) Reviews Scanned
- Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
- Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
- Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans.
- Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.
- Package contents: 1 black 15.7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug.
- Thermalright is a Taiwanese brand with more than 20 years of development. It has a certain popularity in domestic and foreign markets and has a decisive influence in the player market. R & D product lines include: CPU air-cooled radiator, chassis cooling fan, thermal conductive silicone pad, thermal conductive silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.
- Built in strong double-sided sticker, fixed on the chassis with double-sided sticker. SATA power line direct transmission, more concise and more efficient. Maintain stable output under high load.
- Small body, large capacity. Multi line control to keep cables in order.
- This fan hub supports the installation of 10 groups of fans, making it easy to manage wiring. Strong paste installation mode, convenient SATA power line direct transmission, and safety is guaranteed.
- Support fan speed reading. (due to the limitation of PWM mainboard IC reading principle, only the speed of a single fan inserted into the red interface is recognized).
- CABLE MANAGEMENT: Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing
- SYNCHRONOUS FAN CONTROL: Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system
- EXPAND YOUR VENTILATION: Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots
- EXTERNAL POWER SUPPLY: The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible
- TECHNICAL DETAILS: Output: 10 x 4-pin PWM Socket, Output Current: up to 1 A per Port, Input: SATA Power + 4-pin Fan Header, Input Current: up to 4.5 A, Dimensions: 55.6 x 86.3 x 14.3 mm, Weight: 50 g
- 【High performance cable management】Supports the installation of 4 PC fans at the same time, one plug can be used, supports PWM fan connector, can keep the cpu fan cable neat.
- 【Support PWM fan】Support cpu cooler fan speed reading and PWM adjustment, the product has a red interface, due to the limitation of PWM motherboard IC reading principle, only recognize the single fan speed plugged into the red interface.
- 【Convenient installation】Configured with strong double-sided stickers, you can stick the FAN HUB to the right position of the case according to your needs, simple and safe, you can follow the instructions for installation.
- 【Specifications】Model: FAN HUB X4, Dimensions: 67 x 24 x 12mm, Material: Plastic, Colour: Black, Weight: 20g, easy solution for lack of motherboard interface.
- 【Widely Compatible】 The 1 to 4 cpu fan adapter provides power supply and connectors for PC computer case internal pwm fans.
- 【Brand Overview】PCCOOLER is a well-known brand of listed companies in China. It has a certain popularity in the domestic and foreign markets and has a pivotal influence in the player market. We have been focusing on the research and development of computer accessories. R & D product lines include: CPU air-cooled radiator, pc case, case fan, thermal silicone pad, thermal silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.
- 【ARGB & PWM 2 in 1 Fan Hub】PCCOOLER Each port of the fan hub splitter has its own PWM function that simultaneously adjusts the fan speed, allowing users to optimize the cooling capacity within the extended computer case. Support ARGB fans, ARGB light bars, etc., and synchronize the light effect of 5V 3Pin interface devices. (Note: +12V 4Pin RGB interface devices are not supported! Do not plug in!)
- 【Stable SATA Power Input】Fans are powered directly from your power supply via Sata Power, supporting up to 9 fans to prevent stray currents when using a fan hub. No voltage loss at fan speed and for smoother and more efficient operation.
- 【Widely Compatible】The fan hub splitter supports up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips. The installation method is convenient and the installation is more efficient.4-Pin PWM ports supports both 3-Pin and 4-Pin fans, if 3-Pin fans are connected to this fan hub, this fan hub cannot give them extra PWM function.
- 【Magnetic Backplane Design】The PCOOLER 1 to 10 fan hub adopts super magnetic design, which can be attached to the metal surface of the pc case and can be placed at will, without the need to use double-sided tape to fix the chassis, which is more simple and convenient.
- Supports 10 (4-pin) Independent Fans :Capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis
- Direct SATA Power Input: Powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use
- Included Ties/Velcro for Easy Placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place
- Blue LED Power Indicator
- Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
- In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
- For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
- There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
- RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
- 【Brand Overview】Thermalright is a Taiwan brand with more than 20 years of development. It has a certain popularity in the domestic and foreign markets and has a pivotal influence in the player market. We have been focusing on the research and development of computer accessories. R & D product lines include: CPU air-cooled radiator, case fan, thermal silicone grease, CPU fan Hub controller, anti falling off mounting bracket, support mounting bracket and other commodities.
- 【Convenient installation】Configured with strong double-sided stickers, you can stick the FAN HUB to the right position of the case according to your needs, simple and safe, you can follow the instructions for installation.
- 【Support PWM fan】Support cpu cooler fan speed reading and PWM adjustment, the product has a red interface, due to the limitation of PWM motherboard IC reading principle, only recognize the single fan speed plugged into the red interface.
- 【Stable Output】Fan hub synchronizer is SATA power direct output, in the state of high load, can maintain stable output, compact size, top surface with Thermalrigh engraved logo,stable function
- 【Sufficient length】The 500mm long black cable is long enough to install the fan hub anywhere inside the case,more durable and make the internal of pc case looks more clean & tidy.
- Improved Cable Management: The 90 cm / 35.4 inch long PST cable allows you to simplify your cable management, making it easy to place fans in any position within your housing
- Cable Size: Cable length (overall): 90 cm / 35.4 inch, Cable length (to first Socket): 25 cm / 9.8 inch, Cable length (between Sockets): 15 cm / 5.9 inch.
- Expand Your Ventilation: The PST Cable allows you to connect up to 6 case fans to a single header, even if you don't have enough fan headers on your mainboard
- Widely Compatible: The cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
- Package contents: 1 black 1-to-6 splitter fan power supply extension cables
- Excellent 1 to 5 way splitter pc case fan hub 4-pin PWM fan power supply extension cable cord, better power supply for PC computer case internal motherboard fans.
- Widely Compatible: support 4-pin and 3-pin fans cable, the 1 to 5 splitter 5 way hub fan power extension cable compatible with 4-pin and 3-pin PC case motherboard fans.
- 13 inch length black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean & tidy.
- Plug-n-Play, easy to plug; 5 way 4-pin male connector jack fan hub cable.
- The pc case fan hub extension cable offers greater flexibility between motherboard and CPU cooling fans.
Last update on 2024-06-11 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best cpu fan hub?
Do you get stressed out thinking about shopping for a great cpu fan hub? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching cpu fan hub, which is why we have assembled a comprehensive list of the greatest cpu fan hub available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for cpu fan hub that you consider buying. Your questions might include the following:
- Is it worth buying an cpu fan hub?
- What benefits are there with buying an cpu fan hub?
- What factors deserve consideration when shopping for an effective cpu fan hub?
- Why is it crucial to invest in any cpu fan hub, much less the best one?
- Which cpu fan hub are good in the current market?
- Where can you find information like this about cpu fan hub?
We’re convinced that you likely have far more questions than just these regarding cpu fan hub, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for cpu fan hub, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible cpu fan hub. Make sure that you are only using trustworthy and credible websites and sources.
We provide an cpu fan hub buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available cpu fan hub currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of cpu fan hub has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an cpu fan hub?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your cpu fan hub.
- Customer Ratings: Number ratings grade cpu fan hub objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their cpu fan hub.
- Product Quality: You don’t always get what you pay for with an cpu fan hub, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an cpu fan hub is should be an indication of how long it will work out for you.
We always remember that maintaining cpu fan hub information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding cpu fan hub is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.