The Best Geeetech Dual Extruder of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Geeetech Dual Extruder of 2022. Check our ranking below.

2,676 Reviews Scanned

Rank No. #1

Redrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with Creality Ender 3 V2 Pro,Ender 3 Neo Series,CR10 3D Printer TPU Filament Supported(Motor Shaft>20mm)

【Dual Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue.
【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,CR10 S series 3D printer.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.
【Kindly Reminder】:Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height;for Vyper users,please swap the motor wire sequence to make it turn forward instead of reverse

Rank No. #2

SIMAX3D Dual Drive Bowden BMG Extruder 1.75mm High Performance Upgrading Parts for CR10,Ender 3 Series,Wanhao D9,Anet E10,Geeetech A10 and Other DIY 3D Printer kit

【Packing List】1x Bowden BMG Extruder
【Setting】Recommending E-steps setting: around 415, pls adjust to a most suitable one
【Dual Drive Technology】More powerful extruding and avoid slipping with 3:1 Ratio of extruding, thus higher precision.
【Metal Hand Screw】More durable hand screw when use it.
【Warranty】Every product passed QC before shipment. But if you have problem, we provide free return/exchange in 90 days, pls contact us.

Rank No. #3

BIQU H2 V2S Dual Gear Extruder Upgrade H2 Extruder 3D Printer Direct Extruder 1.75mm Filament BIQU BX Creality Ender & CR Series Printers, Anycubic Mega S, Geeetech Printers and Prusa I3 DIY Kits

Lightweight & Wide Compatibility: BQIU H2 V2S, 195g lightweight design, smaller inertia, more accurate positioning, higher printing accuracy, than the ordinary 300g extruder on the market. 34% lighter at launch. Widely compatible with BIQU B1, BIQU BX, Ender-3, Voron2.4, Voron V0, Vzbot 3d printer, etc
Adjustable Filament Loading Tension: Simply rotate the tension screw to accommodate different filaments, improve the printing success rate, improve the printing performance of flexible filaments, compatible with most filaments on the market, such as: ABS/PLA/PVA/HIPS/PET/ PET etc
Dual Gear Feeding: H2 V2S extruder, powerful extrusion system, dual gear and a gear ratio of 7:1 for exceptional pushing force, 770N extrusion force, ensuring smooth feeding and giving snappy retractions
Efficient Heat Dissipation & More Mounting Holes: The lightweight and wear-resistant aluminum alloy housing, high thermal conductivity heat sinks, and fan realize a better heat dissipation.4 screw mounting holes are available for installing an auto leveling sensor/cooling fan, which can achieve more Function
High Temperature Print & Good Printing Experience: Bi-metal heatbreak enables high-temp printing at 270℃ with silicone sock for insulation.Accurate Movements/Higher Movement Speed /Better Print Detail, Its young and personalized design is also enough to catch the attention of most 3D enthusiasts

Rank No. #4

BMG Extruder 3D Printer Upgraded Bowden Extruder Dual Drive Extruder for Creality Ender 3 Pro/Ender 5 Pro/CR10S Pro, Anycubic Mega S, Tevo Tornado Wanhao D9, Anet A8 E10 and Prusa I3 DIY Printer Kits

Package include: Dual Drive Extruder *1Pcs
Notification: Do not adjust tension of hand twist screw too tight when you print soft filament, otherwise the filament wiring will be winding on the wheel. Manually adjust to a suitable tension for your 3D printer.
Dual Drive:Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
Application: SIMAX3D For 3D printer upgration, especially those who want to print soft filament like TPU. All other filament is suitable as well: PLA / ABS / PETG / NYLON / CARBON FIBER / WOOD
Compatibility: Suitable for most DIY 3D printers, such as Creality CR10, Ender 3 series, Wanhao D9, Anet A8 E10, Geeetech A10 3D printer high-performance upgrade parts.

Rank No. #5

SIMAX3D【2PCS/Pack】Dual Drive BMG Bowden Extruder 1.75mm High Performance Upgrading Parts for CR10,Ender 3 Series,Wanhao D9,Anet E10,Geeetech A10 and Other DIY 3D Printer kit

✔ Dual drive technology: It is easy to assemble and feed the filament smoothly and continuously without worrying about sanding or slipping under the most demanding conditions.
✔ SIMAX3D BMG extruder is able to adjust the tightness with screw nut to fit with all 3D printing，filament solid &soft: PLA / ABS / PETG / TPU / NYLON / CARBON FIBER / WOOD
✔ Compared to other extruder, SIMAX3D BMG extruder uses double wheel to feed filament from two sides to make sure filament is evenly stressed and avoid filament slip.
✔ SIMAX3D dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy
✔ Suitable for most DIY 3D printers, such as Creality CR10, Ender 3 series, Wanhao D9, Anet E10, Geeetech A10 3D printer high-performance upgrade parts.

Rank No. #6

GBA-SZC Dual Drive Extruder High Performance Upgrading Parts for Mega S/CR10/Prusa I3,Ender 3 V2/Ender 3 Pro/Ender 3 Series,Wanhao D9,Anet E10,Geeetech A10 and Other DIY 3D Printers.(Type2)

1.Dual Drive Extruder utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears to give you a compact powerhouse for all your applications.
2.Better Experience on Flexible Filaments:It feeds all materials with high reliability,from PLA/ABS/PETG to TPU/TPE/Nylon filaments.Compared with other bowden extruders ,it provide better experience on flexible filaments.
3.Adjustable Tension Available: The thumbscrew tensioner allows you to fine-tune the pressure exerted by the drive gears onto the filament.
4.Whether you require high resolution prints with small nozzles or high-flow prints with big nozzles the optimized gearing ratio combined with our industry leading drive gears provides unparalleled pushing power and lightning fast retractions in a lightweight and compact package.
5.Suitable for most DIY 3D printers, such as Ender 3 Series,Ender Ender 5 Series,CR10 Series,Geeetech A10/A20/A30/A30 Pro,Artillery Sidewinder,Wanhao D9, Anet E10 and other DIY 3D Printer Kits.

Rank No. #7

BIQU H2 V2S Direct Drive Extruder for BIQU BX, New Upgrade Dual Gear Extruder DIY for Creality Ender Series, CR Series, Anycubic Mega S, Geeetech 3D Printers

Retaining the Advantages of Short-range Extrusion: H2 V2S direct extruder has more accurate control of the feed rate and more accurate withdrawal than remote extrusion; the torque requirement of the extrusion stepping motor is relatively lower
Stainless Steel Multi-gear Transmission: The H2 V2S extruder upgraded to stainless steel gears to effectively solve the problem of running stuck. It achieves a torque transmission ratio of 7:1 through multi-gear transmission, and an ultra-high torque of 770mN.m achieves greater performance
High Quality Titanium Copper Alloy Pipe: H2 V2S uses high-quality titanium-copper alloy throat pipes, which have better heat dissipation and high temperature resistance, and the printing temperature can be as high as 400°C. The smoothness of the inner wall of the throat and nozzle reaches Ra0.4, which can effectively prevent clogging
Unique Cooling Sytem: The heatsink structure on H2 extruder is optimized to ensure airflow is diverted up and away from the nozzle accelerating heat dissipation. In addition, the improved H2 can realize quick disassembly of the throat, which is more convenient to use
Quality & Performance Upgrade: The upgraded H2 V2S extruder still weighs only 195g, which effectively overcomes the shortcomings of the heavier nozzle of the short-stroke extruder, and is especially suitable for dual-nozzle printers. And the heating block is replaced with the aluminum alloy heating block developed by BIQU

Rank No. #8

Bigtreetech Upgrade Dual Gear Extruder, Double Gear MK8 Extruder 3D Printer Dual Driver Stock Feeder All Metal 1.75mm Filament Extruder Kit for CR-10S Pro/CR-10/ Ender 3 V2/Ender 3/Ender 3 Pro Series

Upgraded Dual Extruder: Dual gears and dual pneumatic combined extrusion structure, large extrusion force, enhanced feeding intensity, ensuring smooth feeding. The double gear rotation design locks the filament, which is beneficial to improve printing quality and reduce filament slipping, high-speed extrusion or retraction, better pressure to push the filament into the printer, less easy to lose steps, faster printing speed
Compatibility: Double gear mk8 extruder, perfect replacement for 3D printer CR-10/ CR-10S/ CR-10S Pro/ Ender 3 (initial version)/Ender 3 v2/Ender 3 pro/Ender 5/Tornado, etc. 1.75 mm filament (Set only for 3D printers with motor shafts exceeding 20mm, please measure the shaft length before placing an order.)
Stable and Durable: All metal aluminum alloy, high quality double gear extrusion, compared with ordinary plastic drive, this high aluminum metal filament extruder is stable and durable. The idler gear has been upgraded with a brass washer added between the stainless steel gear and the aluminum housing, so the gear does not collide seriously with the housing, which helps reduce stock extruder wear
Adjustable Spring: The tension of the extrusion spring can be adjusted by tightening the screw, which greatly improves printing accuracy and paper feeding problems. Strong extrusion end spring enhances feeding strength and ensures stable pushing of filaments into the hot end of the printer. Suitable for most types of filament, such as ABS, PLA, TPU, PTEG etc
Imported Materials: The 3d printer dual extruder material is made of brand new imported aviation aluminum material and processed by CNC imported from Japan. The kit does not include the stepper motor, motor bracket and instructions, we need to make them ourselves. If you need some installation help, there are video introductions online, and you can seek our technical help at any time

Rank No. #9

BZ 3D Dual Drive Extruder,Dual Gear Bowden Extruder,High Performance Parts for Ender 3 /V2/Pro/Ender 5 /CR10/Ender 3 Neo/i3 Mega Series/Anet A8 E10/Prusa I3 Other DIY 3D Printers.

Dual Drive Extruder utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears to give you a compact powerhouse for all your applications.
Better Experience on Flexible Filaments:It feeds all materials with high reliability,from PLA/ABS/PETG to TPU/TPE/Nylon filaments.Compared with other bowden extruders ,it provide better experience on flexible filaments.
Adjustable Tension Available: The thumbscrew tensioner allows you to fine-tune the pressure exerted by the drive gears onto the filament.
Whether you require high resolution prints with small nozzles or high-flow prints with big nozzles the optimized gearing ratio combined with our industry leading drive gears provides unparalleled pushing power and lightning fast retractions in a lightweight and compact package.
Suitable for most DIY 3D printers,such as Ender 3 Series,Ender 5 Series,CR10 Series/Ender 3 Neo Series/CR-6 SE/Geeetech A10/Wanhao D9/Anet A8 E10/Prusa I3 and other DIY 3D Printers. The reference value of E-step is 385. Do an Estep calibration to get exact estep that fits your printer. Note:For Mega/Vyper users,Please make sure to：Invert the stepper motor in firmware or by swapping stepper cables to changing the direction of rotation.

Rank No. #10

3Dman Dual Drive Bowden Extruder Universal Geared Extruders for Ender 3 V2, Ender 3 Pro, Ender 3 Series, CR10 Series, Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer

Dual Drive technology: This Bowden utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears,which will minimize slippage and increase feeding strength.
Fastening Spring Device: Bowden extruder allows the user to fine-tune the tightness with screw nut to fit with the most filament, such as PLA/ABS/ PETG/ TPU/NYLON/CARBON FIBER/WOOD.
Reduction Gear Device: It can give out more torque,reduce the burden of the motor, extend the life of the motor.
For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer.
We recommend E-steps: 385. Any problem when you receive the order, CONTACT US FIRST please!

Last update on 2025-03-25 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Geeetech Dual Extruder?

Do you get stressed out thinking about shopping for a great Geeetech Dual Extruder? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Geeetech Dual Extruder, which is why we have assembled a comprehensive list of the greatest Geeetech Dual Extruder available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Geeetech Dual Extruder that you consider buying. Your questions might include the following:

Is it worth buying an Geeetech Dual Extruder?
What benefits are there with buying an Geeetech Dual Extruder?
What factors deserve consideration when shopping for an effective Geeetech Dual Extruder?
Why is it crucial to invest in any Geeetech Dual Extruder, much less the best one?
Which Geeetech Dual Extruder are good in the current market?
Where can you find information like this about Geeetech Dual Extruder?

We’re convinced that you likely have far more questions than just these regarding Geeetech Dual Extruder, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Geeetech Dual Extruder, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Geeetech Dual Extruder. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Geeetech Dual Extruder buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Geeetech Dual Extruder currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Geeetech Dual Extruder has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Geeetech Dual Extruder?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Geeetech Dual Extruder.
Customer Ratings: Number ratings grade Geeetech Dual Extruder objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Geeetech Dual Extruder.
Product Quality: You don’t always get what you pay for with an Geeetech Dual Extruder, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Geeetech Dual Extruder is should be an indication of how long it will work out for you.

We always remember that maintaining Geeetech Dual Extruder information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Geeetech Dual Extruder is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Geeetech Dual Extruder of 2022 – Reviewed and Top Rated

How Do You Buy The Best Geeetech Dual Extruder?

Related Post: