The Best hydraulic mountain bike brakes of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best hydraulic mountain bike brakes of 2022. Check our ranking below.
2,623 Reviews Scanned
Rank No. #1
TOBWOLF 1 Pair MTB Disc Brake Set, Hydraulic Disc Brake Kit with 160mm Rotors, Left Front 81cm & Right Rear 147cm, Aluminum Oil Pressure Calipers Levers for Mountain Bike E-Bike Fat Bike Road Bike
- 【Important NOTE】-- This set works on the principle of Left Front and Right Rear, which means the left lever controls front wheel brake, while the right lever controls rear wheel brake. The position of front and rear brake operation may vary due to different people or regions. You may switch the brake cable based on your actual needs. (Using a wrentch and a plier to disassemble the brake cable and swap the sides. There might be small amount of oil leakage, but it doesn't affect the usage.)
- 【Installation Instructions】-- Make sure the calipers and pads correctly fitted to the hub and aligned with the disc. Adjust the clearance and fine tune the brake adjustment screws to ensure good braking without clicking. Exhaust the hydraulic disc brake system to maintain optimum performance. Pull the brake handle to test if the brakes are contacting the disc to make sure the braking effect is normal. (Kindly contact us to send you the user manual. Also check the video on this detail page.)
- 【Upgraded Ceramic Brake Pads】-- The ceramic brake pads will not damage the disc, and further improves the braking effect. Please remove the caliper protection sheet before installation. This hydraulic disc brake kit is constructed using high grade aluminium alloy, not only no squeaking from the brakes rubbing, high temperature resistance and anti-breaking, will not affected by extreme weather like rain and snow.
- 【Stainless Steel 6-Bolt Disc Rotors】-- Ultra-light rotors that shed weight and shred trail, while still achieving superior braking power and modulation. With massive vent holes throughout the spider, and drilled holes through your contact patch to help both with heat vetting and weight shaving.
- 【Widely Compatible】-- It comes with sturdy steel fasteners and will work with any 6 bolt compatible hubs. Suitable for most mountain bike, road bike and hydraulic disc brake system. Please make sure whether the hose is long enough before purchasing.(**Left-Front Tube Length: 81cm, Right-Rear Tube Length: 147mm. )
Rank No. #2
Acciaiie Shimano MT200 Hydraulic Brakes, 2 Piston Left Front 800mm Right Rear 1500mm with Rear is/PM Adapter MTB Hydraulic Brakes, Dual Disc Brakes Fit 160mm / 180mm Rotors Hydraulic Disc Brakes
- 【Brakes Size】: For shimano mt200 hydraulic brakes, left side controls the front, right side controls the back, cable of front is 800mm, cable of back is 1500mm, with rear IS/PM adapter.
- 【Quiet Braking】: The brake pad of shiman hydraulic brakes is made of resin-metal composite pads, not only not damage your rotor, but also not make any noise when braking.
- 【Massive Stopping Power】: Shimano hydraulic brakes is the best upgrade kit from mechanical brake, dual-piston oil pressure hydraulic brake caliper helping you braking easier, you can stop with almost no pressure.
- 【High Compatibility】: Shimano MT200 disc brakes set suitable for most mountain bikes, electric ebike,fat bike,folding bike,scooter (You only need to consider whether the tubing is long enough, package not inclued adapter).
- 【Easy to Install】: Shimano hydraulic brakes set uses mineral oil fluid(pre bled), unboxing ready to install and use. And unlike other low-end hydraulic brakes, you can easily buy professional maintenance tools and pad.
Rank No. #3
JGbike mtb Hydraulic Disc Brake Set Compatible with Shimano MT200 for Mountain Bike bicycle MTB XC Trail, e-Bike, Fat Bike, the best upgrade kit for Mechanical Disc Brake
- 🚴♂️- Left or Front and Right for rear;
- 🎁 - Front 800mm and Rear 1500mm ( A Pair);
- 🌟 - Pre-installed MT200 Disc brakes with pre-belt hose, and ready to install by opening box;
- 🏫 -Product well packaged in JGbike retail package.
- 🤟 - Match DIY Options, find rotors or bleeding kits for your brakes, find mtb pedals, cassette, single chainring from store page, even groupset to build your bike. We commit for the most affortable bicycle parts to improve your performance and experience!
Rank No. #4
JKSPORTS ShimanoOEM BR MT200 Hydraulic Disc Brake Set Front 800mm and Rear 1400mm BR-BL-MT200 Hydraulic Disc Brake Set Front and Rear
- SHIMANOOEM MT200 Hydraulic Disc Brake Set Front 800mm and Rear 1400mm BR-BL-MT200 MT200 Hydraulic Disc Brake Set left Front and right Rear.
- Left and right levers Front and rear calipers 2 brake pads 2 pre-bled hoses (800mm & 1400mm).
- 800mm/1400mm Left & Right Lever. Oil Tube Length: 800mm / 31.5 in ( front brake ), 1450mm / 57.1 in ( rear brake ).
- These brakes come filled and bled. come with 1*BH59 insert and bush Complete set with levers, cables and calipers
- SHIMANOOEM BR BL MT200 Hydraulic Disc Brake MTB Mountain Bike Calipers Left & Right Lever
Rank No. #5
BUCKLOS MTB Hydraulic Disc Brakes, Mountain Bike Left Front 800mm Right Rear 1450mm Hydraulic Brake Set Aluminum Alloy Levers with Calipers PM/is Adapter Fit EBike/Fat Bike
- Massive stopping power: The hydraulic brakes for mountain bike is an upgrade kit from the mechanical disk brakes system, you can stop with two fingers only, ideal for trail riding,downhill, choppy mountain，snow, beach, flat road etc
- Easy to install: Bucklos mtb hydraulic disc brake set already pre-bled mineral oil for you. Before installation, pleas.e confirm whether the hose length is fits with your bicycle frame and if use 180 mm, 203 mm rotors please replace the adapters
- Fit most bikes: Zoom HB-875 hydraulic brakes caliper is dual piston full oil pulling compatible with 160 mm rotor. Fit most of bicycles, like electric ebikes, scooter, folding bikes, fat bike, bmx etc
- Quiet braking: Bucklos hydraulic disc brakes for mountain bike is made of resin-metal composite braks pads which protect. your rotors and do not make any noise when you cycling
- Brake direction: Bucklos bike hydraulic brakes adopts left-front/ right-back braking method, fits the habit of most American people, cable for front is 800 mm, rear line is 1450 mm
Rank No. #6
BUCKLOS 2 Piston Bike Hydraulic Disc Brakes with Brake Pad Aluminum Alloy Levers with Calipers PM/is Adapter MTB Disc Brake Set Fit for Mountain Bike, Road Bike, BMX HB-323
- Dual Piston Hydraulic Disc Brakes: The hydraulic disc brake is made of high-quality aluminum alloy material, with dual piston braking, increasing friction area, keeping the rotors in the center moderately, evenly stressed, and not easily deformed
- Quiet Braking: Brake pads are made of semi-metallic material which are wear-resistant, sensitive, strong in braking performance, no noise during braking, and will not damage the disc brake rotors
- Ergonomic Design: BUCKLOS MTB hydraulic disc brakes set adopts an ergonomically designed three-finger brake lever, helping you braking easier, and suitable for install 22.2 mm handlebars
- Easy to Install: The hydraulic brakes set uses mineral oil fluid(pre bled), unboxing ready to install and use. Please do not remove the red brake pad protective plate to pressing the brake lever before installation, and otherwise it will cause oil leakage
- Fit Most Bikes: Bucklos HB-323 hydraulic brake set is equipped with IS/PM universal mounting adapter, suitable for mountain bike, MTB, road bike, e-bike, scooter, folding bikes, fat bike, bmx etc(You only need to consider whether the tube is long enough）
Rank No. #7
Cyclon Shimano MT200 MTB Hydraulic Disc Brakes Set, Left Front 800mm Right Rear 1400mm with Rear PM/is Adapter Aluminum Alloy Hydraulic Bike Brakes, Dual Disc Piston Fit 160mm Rotors Hydrauli Brakes
- 【Brake Size】For shimano hydraulic brakes,left side controls the front, right side controls the back, cable of front is 800mm, cable of back is 1400mm, with rear PM/IS adapter.
- 【Massive Stopping Power】Shimano mt200 hydraulic brakes is the best upgrade kit from mechanical brake, dual-piston oil pressure hydraulic brake caliper helping you braking easier, you can stop with almost no pressure.
- 【Quiet Braking】: The brake pad of this shimano hydraulic brakes is made of resin-metal composite pads, not only not damage your rotor, but also not make any noise when braking.
- 【High Compatibility】Shimano disc brakes set suitable for most mountain bikes, electric ebike,fat bike,folding bike,scooter (You only need to consider whether the tubing is long enough, package not inclued adapter).
- 【Easy to Install】Shimano hydraulic brakes set uses mineral oil fluid(pre bled), unboxing ready to install and use. And unlike other low-end hydraulic brakes, you can easily buy professional maintenance tools and pad.
Rank No. #8
Cyclon Shimano MT200 Hydraulic Brakes with Shimano SM-RT26 160mm / 180mm Rotors, Left Front 800mm Right Rear 1400mm MTB Hydraulic Disc Brakes Aluminum Alloy Levers with Calipers
- 【Brake Size】For shimano hydraulic brakes,left side controls the front, right side controls the back, cable of front is 800mm, cable of back is 1400mm, with rear PM/IS adapter.
- 【Massive Stopping Power】Shimano mt200 hydraulic brakes is the best upgrade kit from mechanical brake, dual-piston oil pressure hydraulic brake caliper helping you braking easier, you can stop with almost no pressure.
- 【Quiet Braking】: The brake pad of this shimano hydraulic brakes is made of resin-metal composite pads, not only not damage your rotor, but also not make any noise when braking.
- 【Enhanced Brake Rotor】Increased strength by more than 20% at the edge reinforcement. The thickness of the bicycle floating disc brake rotor is 1.8mm, stainless steel brake disc reinforced material, dirt removal and drainage design, high-strength aluminum alloy material, stainless steel floating buckle. The international standard of hole spacing 44mm.
- 【High Compatibility】Shimano disc brakes set suitable for most mountain bikes, electric ebike,fat bike,folding bike,scooter (You only need to consider whether the tubing is long enough, package not inclued adapter).
Rank No. #9
JFOYH zoom HB876 4-Piston Pre-Bled Hydraulic Disc Brake Set for Mountain Bike, Bike Disc Brake Kit with 160mm Rotors, Front and Rear Levers(PM Adapter Included) - Left-Front&Right-Rear
- Experience Powerful Braking: Our 4-piston dual-way brake system provides exceptional braking force, allowing you to stop on a dime every time. Many satisfied customers can attest to its performance.
- Easy Installation: Our brake system comes pre-bled with mineral oil, making it convenient for anyone looking to upgrade their bike.
- Original Stainless Steel Rotors: Our rotors are made with high-strength stainless steel, featuring a hollow design for improved heat dissipation and easier cleaning. At 1.85mm thickness, they're built to last.
- Standard 4-Piston Pads Included: Our brake system comes with pre-installed standard 4-piston pads that are compatible with popular models such as SHIMANO BR-M8120/M7120/M6120M8020/M820/M810/M640MT520/MT420. Replacement pads can be easily found on the market.
- Check Hose Length: Please ensure the brake oil hose is sufficient for your bike before purchasing. The front hose measures 31.5 inches (800mm) and the rear hose measures 55.1 inches (1400mm).
Rank No. #10
CNC MTB Hydraulic Disc Brake Set，Mountain Bike Hydraulic Disc Brakes Right Front 800mm Left Rear 1450mm Hydraulic Brake，Black
- Braking System:Bicycle Hydraulic Disc Brake Set ，Used for brake systems of ordinary bikes, mountain bikes，bmx，fixed gear Bike and road bikes.
- Integrated Design - Two-way Brake: MTB Hydraulic Disc Brakes Set uses the integrated brake lever and double-piston hydraulic disc brake, which can brake in both directions. The lightweight design is more convenient to use, and the tightness is strong, more stable and reliable performance.
- Superior Braking Performance: Hydraulic Brake Set Double-acting piston made of forged aluminum alloy, the caliper body drives both sides of the friction disc at the same time, the disc holds the center without deviation. The automatic reset of the brake pads, mineral brake oil that can maintain superior braking function at high temperatures.
- Material: The brake lever and caliper are forged from aluminum alloy, the surface is anodized and matte, and the stability is strong, which makes the brakes responsive, durable and long-lasting，Braking is very smooth in the wettest conditions or the steepest downhills.
- Product specifications: Right front brake: F160 / R140 ， Hose length: approx. 800 mm ； Left rear brake: F180 / R160 ， Hose length: approx. 1450 mm ； Column A and column B General: Column A: 75mm, column B: 51mm.Brake fluid is mineral oil.
Last update on 2025-03-19 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best hydraulic mountain bike brakes?
Do you get stressed out thinking about shopping for a great hydraulic mountain bike brakes? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching hydraulic mountain bike brakes, which is why we have assembled a comprehensive list of the greatest hydraulic mountain bike brakes available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for hydraulic mountain bike brakes that you consider buying. Your questions might include the following:
- Is it worth buying an hydraulic mountain bike brakes?
- What benefits are there with buying an hydraulic mountain bike brakes?
- What factors deserve consideration when shopping for an effective hydraulic mountain bike brakes?
- Why is it crucial to invest in any hydraulic mountain bike brakes, much less the best one?
- Which hydraulic mountain bike brakes are good in the current market?
- Where can you find information like this about hydraulic mountain bike brakes?
We’re convinced that you likely have far more questions than just these regarding hydraulic mountain bike brakes, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for hydraulic mountain bike brakes, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible hydraulic mountain bike brakes. Make sure that you are only using trustworthy and credible websites and sources.
We provide an hydraulic mountain bike brakes buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available hydraulic mountain bike brakes currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of hydraulic mountain bike brakes has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an hydraulic mountain bike brakes?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your hydraulic mountain bike brakes.
- Customer Ratings: Number ratings grade hydraulic mountain bike brakes objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their hydraulic mountain bike brakes.
- Product Quality: You don’t always get what you pay for with an hydraulic mountain bike brakes, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an hydraulic mountain bike brakes is should be an indication of how long it will work out for you.
We always remember that maintaining hydraulic mountain bike brakes information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding hydraulic mountain bike brakes is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.