The Best Inline Filament Dryer of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Inline Filament Dryer of 2022. Check our ranking below.

2,177 Reviews Scanned

Rank No. #1

[Upgraded with Fan] 2024 SUNLU Official Filament Dryer Box S2 for 3D Printer Filament, Upgrade Filament Storage Dehydrator for PLA PETG ABS Nylon PA Filament 1.75 2.85 3.00mm

✅【Keep Filaments Strong & Flexible】By Using SUNLU Filament Dryer Box S2 to removing moisture from the filament before it's used in the 3D printer, S2 filament dryer helps to ensure that the filament will be dryed. which will result in better print quality and fewer failed prints. This is important in save time, money, and frustration by improving the reliability and consistency of their 3D printing process.
✅【Touch Screen & Easy Operation】3D filament dry box S2 has a new touch screen that is designed to provide a tablet-like operation experience for the user. The screen is 3.42*2.87 inches in size, which makes it easy to navigate and use. The touch screen also allows user to easily switch between ℃ and ℉ and offers one-key recommended temperature settings for different types of filament. This makes it easy for the user to set the appropriate drying temperature for their filament.
✅【Easy to Use & Quality Guaranteed】 Allows you to print while drying. 2 inch large LCD screen monitor,Able to display temperature&time clearly and brightly. Decrease Noise when Printing (less than 10db while operating).
✅【Wide Compatibility Range】compatible with a wide range of filament brands and diameters. It can work with all mainstream 3D filament brands and all standard filament diameters of 1.75mm/2.85mm/3.00mm. This means that it can be used with a variety of filaments, including PLA, PLA+, PETG, TPU, ABS, and even high-end filaments like PA and PC. This makes it a versatile and convenient option for users who want to dry their filament.
✅【Drying & Printing at One Time】The feed-out coil also allows the filament to continue to dry in the dryer as it's being fed to the printer. This means that the filament will be dry and ready to use when it reaches the printer.

Rank No. #2

Comgrow 3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA PETG ABS Material, Filament Dehydrator, Spool Holder

Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA PETG ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.
Setting Notes - Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
Filament Dryer and Remove Moisture - Comgrow 3d printer filament dryer box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments and keeps the filament dry. Avoid entanglement, clogging, poor adhesion, and layer migration caused by the dampness of the printing wire. (Note: Only used for the drying of 3D printer Filament)
Real-time Monitoring of Temperature and Humidity - Adjustable temperature range 40°~ 50 °C, setting time from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display. Press the power button to start, and hold the function button(M) to change the dry time and the temperature setting.
Great Sealed Filament Dry Box -The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.

SaleRank No. #3

3D Printer Filament Dryer Easdry Adjustable Temperature, Humidity Control & Spool Holder, Compatible with 1.75mm 2.85mm 3.00mm Nylon, PLA, ABS

【DRYER & STORAGE BOX】the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Also 2 slots at the corners were designed for placing dessicant,keep your filament in longer drying condition.Sealed protection, comprehensive dust-proof and damp, no impurities. US Plug, input voltage 110V-120V
【INFINITE ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR】based on infinite adjustable temperature mode, you can adjust specific heating temperature to accommodate needs of various filaments by simply turning the knob from 40-65℃, with main types of filaments marked for your fast use. Equipped with individual humidity sensor, measurement range from 10%-99% (NOTE: A76/LR44 button battery has ALREADY included), real-time data will be indicated by the LCD monitor
【COMPATIBLE WITH MULTIPLE SPOOLS】works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PVA, PC, TPU, PETG, PA, Wood, ABS, Silk, etc. Exquisite space allows usage of single roll with spool size: 220x72mm, Inner size: 50mm, with little rubber seals to fit around a PTFE tube, and smooth rotating shaft allows the filament to continuously rotate in a dry hot box to remove moisture
【HOT-AIR CIRCULATION HEATING SYSTEM】applying hot air circulation heating which makes the temperesuture inside box more even, filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily
【45W PTC HEATER & BUILT-IN FAN】different from applying ordinary heater 48W PI heating pad to heat up space, our product use 45W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture

Rank No. #4

SUNLU Filament Dryer Box with Fan for 3D Printer, Upgraded Filament Dehydrator Storage Box for 3D Filament 1.75 2.85 3.00mm, Keeping Filament Dry During 3D Printing, S1 Plus, White

【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market
【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.
【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.
【User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing

Rank No. #5

2024 SUNLU Official Filament Dryer Box S4,Four-Spool 3D Printer Dehydrator with Rapid Heating, Auto Humidity Control, and Advanced Triple Fan Upgrade,Compatible with PLA,PETG,ABS,TPU,PA

Four-Spool Filament Dryer Box - SUNLU S4 is the first filament dryer box capable of accommodating four 1kg spools simultaneously. It is equipped with eight filament holes and PTFE tubes, meeting the demands for drying multiple filaments and enabling concurrent printing with multiple printers.
Fast Heating & Drying Evenly - The SUNLU S4 filament dryer is equipped with a PTC heating element and a triple-fan configuration. The interior heat is efficiently circulated with three fans, making the heating process more even. Additionally, the S4 filament dry box achieves rapid heating up to 70 °C in record time. The robust 350W PTC heater is 6.9 times more powerful than the SUNLU S2, ensuring an accelerated and efficient filament drying experience.
Auto Humidity Control - The SUNLU FilaDryer S4 incorporates a high-precision humidity sensor, displaying real-time interior humidity. Even when the filament dryer is in standby, it will automatically activate when the interior humidity reaches or exceeds 50%, preventing secondary moisture exposure. Thus, it can also serve as your filament storage box.
Easy to Use - The adjustable temperature range is 35°C to 70°C, with a setting time from 0 to 99 hours. This 3D printer filament dryer features a large touch screen, providing a tablet-like operation experience. It also comes with pre-configured temperature and drying time settings for commonly used filaments such as PLA, ABS, PETG, as well as PA and PC. This reduces setup complexities and enhances your user experience.
Universal Compatibility - The SUNLU S4 filament dehydrator is compatible with PLA, PLA+, PETG, TPU, ABS, PA, PC, Nylon, and other high-end 3D filaments. It works perfectly with all standard filament diameters: 1.75mm, 2.85mm, 3.00mm.

SaleRank No. #6

Sovol Filament Dryer 2023, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS

【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament.
【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect.
【Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality.
【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation.
【Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to contact us. Our technical support team will provide service as soon as we can.

SaleRank No. #7

3Dgenius 3D Printer Filament Dryer Filament Dryer Box 3D Filament Dryer for Nylon ABS PETG PLA Filament with Fan for 360° Surrounded Heating, Compatiple with 1.75mm 2.85mm Filament

【REMOVE MOISTURE FROM FILAMENT】Have you encountered stringing, clogging, poor adhesion, and Layer Shift when printing? The 3d printer filament dryer is designed to help you solve the problems of 3d printing filament caused by ambient humidity. The filament dryer box can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
【360° SURROUND HEATING】 The 3d printer filament dryer is designed of a built-in fan, so the air in the filament dryer can circulate. The fan makes the filament heat more evenly which can achieve all-round surrounding heating and rapid drying. Tips: Due to the fan design, the sound of the PLA filament dryer will be slightly louder than the one without a fan.
【Humanized Design】Our 3D printer filament dryer is designed with 3 filament outlet holes and insulation cotton. Three different positions of outlet holes can meet your needs for a variety of printing position. And the insulation cotton on both sides of the filament dryer box will prevent you from burns when printing.
【3 HEATING LEVEL & 36 HOURS SETTING】The 3d filament dryer has 3 heating level, which are 45℃±3°/113℉±37.4℉, 55℃±3°/131℉±37.4℉, 70℃±3°/158℉±37.4℉. And the maximum working time of the 3d printer filament dryer is 36 hours, you can choose suitable heating level and time according to your printing needs.
【COMPATIBLE WITH MULTIPLE SPOOLS】The PLA filament dryer works for different filament types and diameters. It is compatible with 1.75mm and 2.85mm diameters filament. As the filament dryer box breaks through the heating temperature to 45℃~70℃, it is suitable for PLA, PLA+, ABS, ABS+, PETG, PVA, TPU, PC, PA and other high temperature resistant filaments.

Rank No. #8

Creality Filament Dryer Box 2.0, Temperature Adjustable& 24 Hours Timer Function, Filament Dehydrator Compatible with 1.75/2.85mm PLA PETG ABS Nylon PA Filament

【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. Creality FDM 3D Filament Dryer Box can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
【Importance of Filament Dryer】Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament.
【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 45℃~65℃, time setting range 0~24 hours. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
【Wide Compatibility】It can perfectly fit filament diameters of 1.75mm/2.85mm. And can be used with a variety of filaments, such as PLA, PLA+, PETG, TPU, ABS, ASA, PP, PC,PA, ect
【Satisfactory Goods and Services】Our team of engineers have been testing for years in real-life work scenarios, each tool meets strict quality standards, as a trusted professional seller, we always seek to provide customers with satisfactory products and services, if you have any questions feel free to contact us, we provides you with 24/7 online service, please feel free to buy.

Rank No. #9

Comgrow Filament Dryer, Upgraded Filament Dry Box, Large-Capacity 3D Filament Dehydrator for 2KG Filament, Compatible with 1.75mm, 2.85mm Filament and PLA PETG TPU ABS Material

【Large Capacity】 Compared to other 3d filament dryers, our filament box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Note: Only used for the drying of 3D printer Filament.
【Heating & Drying Function】 The damp 3d printer filament leads to tension, clogging, poor adhesion and shifting of layers. This pla dryer box keeps the filament dry and restores the performance of the 3d printer filaments. Please open the PTFE plugs on the top of the box during heating for Moisture evaporation.
【Optimized Heating Method】 The filament dehydrator makes drying more efficient. The unique design of the fan in the box is based on the principle of othermodynamics of air, makes the filament heated more evenly.
【Excellent Sealed Storage Box】 The silicone seal makes it possible to store the filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality.
【User-friendly Design&1 Year Warranty】 2 inch large screen LCD monitor, can display the humidity, temperature in the filament storage box in real time. Setting temperature 40°C, 45°C, 50°C and setting time from 6 hours to 12 hours. If you have any unsolvable problems about COMGROW 3d printer filament dryer, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

Rank No. #10

SUNLU Filament Dryer with Fan, Upgraded Fast Heating 3D Printer Filament Dryer Box, Keep Filament Dry During 3D Printing, PLA PETG ABS TPU Nylon ASA Filament Dehydrator Storage Box, FilaDryer S2 Black

①【SUNLU Filament Dryer S2】As a leading 3D printing manufacturer, we've invested years of research to develop a product that significantly enhances 3D printing results. Our filament dryer is the great solution, improving the printing effect and optimizing the printing process.
②【Importance of 3D Filament Dryer】Filaments will absorb moisture from the air, especially if they're old or stored in a humid place. Damp filament will cause many printing issues, but a filament dryer can remove the moisture and help reduse these problems.
③【Keep Filament Dry During Printing】SUNLU Filament Dryer can be used as a filament spool holder (storage dehydrator), and can dry filament during printing, thereby improving print quality. This feature is especially important for those who have their 3D printers in humid locations such as basements.
④【Revive Damp 3D printer Filament】Moisture can be a real problem for 3D printer filament, especially if it has been stored for a while. SUNLU Filament Dryer is specifically designed to remove excess moisture and revive old filament, saving you time and money by avoiding the need to replace damp filament.
⑤【Fast Heating and Even Drying】SUNLU filament dryer heats up quickly to the preset temperature, while the built-in spindle ensures that the filament spins continuously for even drying. Additionally, users can customize the drying time (0-99 hours) and temperature (35-70 ℃) to suit their specific needs.

Last update on 2024-03-01 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Inline Filament Dryer?

Do you get stressed out thinking about shopping for a great Inline Filament Dryer? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Inline Filament Dryer, which is why we have assembled a comprehensive list of the greatest Inline Filament Dryer available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Inline Filament Dryer that you consider buying. Your questions might include the following:

Is it worth buying an Inline Filament Dryer?
What benefits are there with buying an Inline Filament Dryer?
What factors deserve consideration when shopping for an effective Inline Filament Dryer?
Why is it crucial to invest in any Inline Filament Dryer, much less the best one?
Which Inline Filament Dryer are good in the current market?
Where can you find information like this about Inline Filament Dryer?

We’re convinced that you likely have far more questions than just these regarding Inline Filament Dryer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Inline Filament Dryer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Inline Filament Dryer. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Inline Filament Dryer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Inline Filament Dryer currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Inline Filament Dryer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Inline Filament Dryer?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Inline Filament Dryer.
Customer Ratings: Number ratings grade Inline Filament Dryer objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Inline Filament Dryer.
Product Quality: You don’t always get what you pay for with an Inline Filament Dryer, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Inline Filament Dryer is should be an indication of how long it will work out for you.

We always remember that maintaining Inline Filament Dryer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Inline Filament Dryer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Inline Filament Dryer of 2022 – Reviewed and Top Rated

How Do You Buy The Best Inline Filament Dryer?

Related Post: