The Best Nodemcu Battery of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Nodemcu Battery of 2022. Check our ranking below.

2,991 (random) Reviews Scanned

Rank No. #1

MakerFocus 4pcs 3.7V 1100mAh Lithium Rechargeable Battery 1S 1C LiPo Battery with Protection Board, Insulated Rubber Tape and Micro JST 1.25 Plug for Ar duino Nodemcu ESP32 Development Board

Please note: battery overcurrent protection is not a panacea, please do not continue to charge and discharge with large current, or the current and voltage beyond the range, otherwise the protection board will be damaged and invalid
1100mAh: The recommended battery charging current is 0.2A, with a maximum of 1A. The recommended discharge current is 0.5A, the maximum is not more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V
Over-discharge protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect
Overcharge protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged, form an overcharge protection
Short circuit protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous high current, or the components are heated and damaged

Rank No. #2

for WeMos D1 Mini ESP8266 WiFi Module with Battery Slot ESP-Wroom-02 Motherboard 18650 Charging Battery Development Board Compatible with NodeMCU

【Package Include】1pcs ESP8266 mini wifi module ESP WROOM 02 motherboard with 18650 battery slot compatible with nodemcu.
【18650 Battery】Upgrade "battery" integrates ESP8266 battery slot, makes it easier to develope ESP8266 project .SMT connector available for sleep mode; Additional LED Programmable.
【Premium Performance】18650 charge system integration. LED indicator (green for full, red for charging) can be used while charging.
【High Quality】18650 battery is made of high quality material which can use for a long time, can run almost 17 hours if it is put into a standard 3000mah battery.
【Note】 The positive and negative direction of the battery must be placed correctly,otherwise the charging chip will be damaged.overercharge protection; over discharge protection.

Rank No. #3

2pcs for WeMos D1 ESP8266 Mini WiFi Module ESP WROOM 02 Motherboard with 18650 Battery Slot Compatible with NodeMCU

【Package Include】2pcs ESP8266 mini wifi module ESP WROOM 02 motherboard with 18650 battery slot compatible with nodemcu.
【18650 Battery】Upgrade "battery" integrates ESP8266 battery slot, makes it easier to develope ESP8266 project .SMT connector available for sleep mode; Additional LED Programmable.
【Premium Performance】18650 charge system integration. LED indicator (green for full, red for charging) can be used while charging.
【High Quality】18650 battery is made of high quality material which can use for a long time, can run almost 17 hours if it is put into a standard 3000mah battery.
【Note】 The positive and negative direction of the battery must be placed correctly,otherwise the charging chip will be damaged.overercharge protection; over discharge protection.

Rank No. #4

MakerFocus ESP32 Development Board WiFi Bluetooth Support Integrated 2.4GHz PCB Antenna CP2102 with 0.96” OLED Display for Ar duino NodeMCU Intelligent Scenes

Support Ard uino Development Environment: WiFi kit 32 is a classic IoT Dev-board, it’s a highly integrated development board based on ESP32 (including WiFi and BLE)
Easy to Use: With good RF circuit and low-power design, ESP32 development board is the best choice for smart citites, farms, homes and IoT makers
Perfect Circuit Design: Onboard WiFi, Bluetooth 2.4GHz PCB antenna. Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
Power Supply: Onboard SH1.25 battery interface, integrated lithium battery management system. You can also use the Type-C interface to power the development board, the interface with complete ESD protection, short circuit protection, RF shielding and other protection measures
OLED Display: Onboard 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power and other information

Rank No. #5

diymore 1865O Battery Holder Double Li-ion V8 Battery Shield Micro USB 5V/3A 3V/1A Power Bank Battery Charging Module for Raspberry Pi and Arduino ESP32 (2 Holders)

Supports 3V 1A voltage outputs.
Supports 5V 2.2A voltage outputs.
Micro USB charging current is 600mA-800mA.
Supports up to two Li-ion batteries. It is recommended to use two 18650 batteries, which can be longer! The cell has to be 65mm.
Special attention: the installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative! Installation errors will burn out the module!

Rank No. #6

2 Pack 18650 Battery Charger Protection Module, MELIFE Power Bank PCB Module Board, Dual USB 5V 1A 2.1A with BMS Protection DIY Mobile Charging Accessories Digital LCD Display Indicator

Designed for 18650 battery DIY power bank: The battery of the 18650 battery must be flat, and the length is 65MM. The pointed battery cannot be used. If you are using old batteries, different capacities, different brands are not available, the assembled battery is guaranteed to be at least 3.5V per voltage. If the voltage is too low, it will not be charged. (It also support lithium battery, mobile phone battery and tablet battery).
Supported connection methods: It is possible to connect only one lithium battery or multiple lithium batteries in parallel. The capacity of connected battery is no more than 200,000 mAh, As long as the battery with a voltage of 3.0-4.2V can be used.
Charge indication of this power bank pcb board: The word "IN" will be shown in the display; Output indication: Long press the LED button after turning on the load, Start output, The word "OUT" and the current and voltage of 5V 1.0A or 5V 2.1A will be displayed in the display.
This is a mobile powerbank module with Protection Function: The protection circuit of the boosted lithium battery has been integrated, prevent over-discharge, over-charge, overload short circuit protection, over current protection, and over temperature protection. Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!!!!
Why can't continue charging when charging capacity is 99%? You just assembled the battery, why the display percentage is not accurate, the battery power is only 50%, but it shows 80% after assembly?--Whether you are using a new battery or an old one all need to be discharged before use(charge your mobile phone), then turn it off charge it once gain. If it still cannot be solved, it is caused by large internal resistance and inconsistent capacity.

Rank No. #7

HANDBOOK OF ESP32 USING THE ARDUINO IDE: A Practical Guide to Development RTOD and Example Dummy Code

Selvam, Jansa (Author)
English (Publication Language)
189 Pages - 07/23/2023 (Publication Date) - Independently published (Publisher)

Rank No. #8

ESP32 Development Board WT32-SC01 with 3.5in 320 * 480 Based on ESP32-WROVER-B Multi-Touch LCD Screen with GUI Firmware 4MB SPI Flash/8MB PSRAM, WiFi, BT, BLE MCU Module for Arduino

WT32-SC01 is an ESP32 Development board with a 3.5-inch color touch screen. The touch screen enables a new way of interacting with the ESP32. The board is equipped with a graphical user interface (GUI) firmware, which supports graphical drag-and-drop programming and helps users develop a customized control platform
WT32-SC01 development board adopts the ESP32-WROVER-B module, which is a general-purpose MCU module with Wi-Fi, Bluetooth, 4MB SPI Flash and 8MB PSRAM.
CPU: Dual-core Xtensa 32-bit LX6 MCU; 2-point touch, Capacitive touch screen; Size3.5 inches; resolution-320*480; power supply:DC 5V /2A; operating temperature:–20 ~ 85 °C
Users can quickly develop through our GUI platform firmware-8ms platform developed independently. support graphic drag and drop programming to help users complete the development of customized control platform. And the technical sources of esp32 and ssd201 /202 are opened in 8ms platform.
Application: home automation, smart home control panel, 86 box, wearable electronics, gateway with screen

Rank No. #9

ElectroKit

calculate the resistance of resistor with color code
calculate the resistance of surface-mounted resistor
calculate the inductance of the inductor from color code
Find the resistance required for the led in the circuits.
calculate the battery life of the battery

Rank No. #10

6pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module

★ MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)
★ 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
★ In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
★ The first time the load is connected, the output is automatically turned on. If the load is less than 50mA, the output will be automatically turned off after 30 seconds; if the load is greater than 50mA, the output will be automatically turned on
★ Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)

Last update on 2023-10-15 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best Nodemcu Battery?

Do you get stressed out thinking about shopping for a great Nodemcu Battery? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Nodemcu Battery, which is why we have assembled a comprehensive list of the greatest Nodemcu Battery available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Nodemcu Battery that you consider buying. Your questions might include the following:

Is it worth buying an Nodemcu Battery?
What benefits are there with buying an Nodemcu Battery?
What factors deserve consideration when shopping for an effective Nodemcu Battery?
Why is it crucial to invest in any Nodemcu Battery, much less the best one?
Which Nodemcu Battery are good in the current market?
Where can you find information like this about Nodemcu Battery?

We’re convinced that you likely have far more questions than just these regarding Nodemcu Battery, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Nodemcu Battery, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Nodemcu Battery. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Nodemcu Battery buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Nodemcu Battery currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Nodemcu Battery has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Nodemcu Battery?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Nodemcu Battery.
Customer Ratings: Number ratings grade Nodemcu Battery objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Nodemcu Battery.
Product Quality: You don’t always get what you pay for with an Nodemcu Battery, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Nodemcu Battery is should be an indication of how long it will work out for you.

We always remember that maintaining Nodemcu Battery information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Nodemcu Battery is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Nodemcu Battery of 2022 – Reviewed and Top Rated

How Do You Buy The Best Nodemcu Battery?

Related Post: