The Best plasma cutter welder combo of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best plasma cutter welder combo of 2022. Check our ranking below.

2,946 Reviews Scanned

SaleRank No. #1

TOOLIOM MIG/TIG/CUT/Stick Welder 5 in 1 Multiprocess Welding Machine 110/220V Dual Voltage Aluminum Welding Machine Spool Gun Compatible

5 in 1 Multi-functions welding machine, 200A MIG Welder & 50A Plasma Cutter & 200A TIG Welder & 200A Stick Welder
Large LCD panel displays welding functions and parameters clearly, read data display
Up to 50A, the maximum severance cut can reach up to 1/2" (12 mm), 3/8" (10mm) ideal clean cut
Can weld aluminum with spool gun(need buy extra spool gun,not included) or MIG gun with graphite wire feed tube
MIG synergistic setting & MIG manual setting, good choice for both novice and professional

SaleRank No. #2

FEMEROL 2 in 1 Plasma Cutter, 60A Non-High Frequency Plasma Cutter/ 200A Stick Welder Large LED Display Non-Touch Pilot Arc, IGBT 110/220V Dual Voltage Plasma Cutting Machine

NON-HIGH FREQUENCY: Non-HF Start, comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machine and human health.
2 IN 1 FUNCTIONS: 60A Plasma Cutter & 200A Sticker Welder, There are two welding modes:plasma cutting/ MMA welding,meeting your different requirements.This plasma cutter is ideal for use on materials including stainless steel, alloy steel, mild steel, copper, aluminum, etc.
POWERFUL CUT AND WELD: CUT-60R utilizes advanced IGBT inverter technology, with a 60% duty cycle. All the main components are realized by software. Ideal Clean Cut: 5/16"(8mm)@110V, 11/20” (14mm)@220V, Maximum Cut: 1/2"(12mm)@110V, 3/4"(20mm)@220V.The stick welding current is 200A,Good performance on 6011, 6013 and 7018 rods.
NON-TOUCH PILOT ARC: This plasma cutter has the pilot arc function. It is a non-high frequency and non-touch arc starting mode.The pilot arc IPT40 torch has better cutting performance, the torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface
PT/2T/4T FUNCTION: Post time adjustable from 1-10 seconds. Adjust the cooling time of the welding head to extend the life of consumables and also to protect the cutting surface. Generally, we recommend a cooling time of 4-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is automatic cutting control.

Rank No. #3

AWT MIG Welding Machine,160A 5 in 1 Plasma Cutter Welder Combo HF TIG/Gas MIG/Flux MIG/Stick Welding,110/220V Dual Voltage, Multi-Process Welder MIG88-160M

【5-in-1 Multifuntion Welder】The AWT welder offers 5 processes: FLUX MIG, GAS MIG,HF TIG,PLASMA CUTTING,and STICK welding, providing a complete solution for various welding and cutting applications. With 110/220V dual voltage, MIG welder perfect for home DIY , farm work and construction sites.
【MIG Synergic Control】Equipped with a built-in synergic control system, it automatically adjusts the recommended current and wire feed speed according to the selected wire diameter and gas type. The simplified operation makes it incredibly user-friendly, enabling even beginners to easily achieve professional-quality results.
【TIG Welding】The High-Frequency HF TIG mode enables non-contact arc ignition, offering enhanced precision and reducing the risk of contamination. This feature is particularly well-suited for high-precision welding applications on materials like low-carbon steel and stainless steel. It ensures a clean, efficient start, making it ideal for industries requiring superior weld quality and accuracy.
【Plasma Cutting】Equipped with dual voltage and a powerful 40A output, the plasma cutting function delivers clean cuts up to 9mm and a maximum cutting capacity of 12mm at 220V. It provides precision and efficiency across various materials, including stainless steel, alloy steel, low-carbon steel, copper, and aluminum, making it highly suitable for a wide range of cutting applications.
【Package List】Multi-function Welder Machine*1,15AK MIG Torch*1,Plasma Cutting Torch with Consumables,TIG Torch with Comsumables,Air Filter Regulator*1, Hammer*1,Ground Clamp*1,Gas hose*2,Electrode Holder*1,110V~220V Adapter*1.

Rank No. #4

YESWELDER Plasma Cutter Welder Combo Gas MIG/Gasless MIG/Lift TIG/Stick/CUT 5 in 1 Welding Machine FIRSTESS MP200 Multi Process Welder

Gas MIG/Gasless MIG/Lift TIG/Stick/CUT 5 in 1 Welder
Can take up to 0.9mm(.035") MIG solid wire(Gas MIG) and 0.9mm(.035") MIG FLux wire(Gasless MIG).
Apply to D100/D200 rolls (<10lbs) of MIG wire.
Ideal for 7018/6011/6010 electrode.
Smart Memory & System Reset.

SaleRank No. #5

AZZUNO 5 in 1 160A Welder Machine, Plasma Cutter Welder Combo with HF TIG/Gas MIG/Flux MIG/Stick Welding, 110/220V Dual Voltage Multiprocess Welding Machine

【5-IN-1 Multifuntion Welder Machine】: This AZZUNO 5-in-1 welding machine supports FLUX MIG, GAS MIG, PLASMA CUTTING, HF TIG, and STICK welding, offering a comprehensive solution for a wide range of welding and cutting tasks, making it ideal for professionals and DIY enthusiasts alike.
【EFFICIENT PLASMA CUTTING】: Equipped with dual voltage capabilities and a powerful 40A output, the plasma cutting function achieves a clean cut of 10mm and a maximum cut of 14mm at 220V. It delivers precision and efficiency across a variety of materials, including stainless steel, alloy steel, mild steel, copper, and aluminum, making it perfect for diverse cutting applications.
【SYNERGIC MIG WELDING】: Featuring advanced digital control, this system automatically adjusts the recommended current and wire feeding speed based on the selected wire diameter and gas type. The simplified operation makes it incredibly user-friendly, allowing even beginners to achieve professional-quality results with ease.
【HIGH-FREQUENCY TIG WELDING】: The HF TIG mode allows for non-contact arc starting, improving precision and reducing contamination, especially useful for welding mild steel and stainless steel with high accuracy.
【PACKING LIST】: Multi-function Welder Machine*1, 15AK MIG Torch*1, Plasma Cutting Torch with Consumables, TIG Torch with Comsumables, Air Filter Regulator*1, Hammer*1, Gas hose*2, Ground Clamp*1, Electrode Holder*1, 110V~220V Adapter*1.

SaleRank No. #6

TOOLIOM 3 in 1 Cut/TIG/Stick Welder 50A Air Plasma Cutter 200A TIG and 200A Stick Welder Portable Welding Machine Dual Voltage 110&220V

3 in 1 Multi-functions welding machine: 50A Plasma Cutter & 200A TIG Welder & 200A Stick Welder.
Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.
Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
Foot Remote(Not Included)/Proximity Control: Compatible with 5pin foot pedal to adjust the current.
Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.

Rank No. #7

Sunstac 5 in 1 Plasma Cutter and Welder Combo, CUT/TIG/MIG/Flux MIG/MMA, 50A Plasma Cutter, 200A TIG and MIG, 180A STICK Welder, 110/220V Dual Voltage Multi-Functional Welder

【5 IN 1 Multi-Functional】Looking for a welder and cutter combo machine? This will be your first choice. Sunstac 5 in 1 multi-functional welder and plasma cutting machine can do CUT / MIG / FLUX MIG / TIG / MMA. Beginner and Pro friendly, one machine does it all. One extra year warranty, covers all quality issues and missing parts
【Plasma Cutter】Cutting Torch model: PT-31 (IN PACK). Up to 50Amps output provides superior cutting power, dual-voltage 110/220V, 2T/4T available. Adopting advanced IGBT inverter technology, achieving a max cutting of up to 19/32" (15mm) and 13/32" (10mm) clean cut, 60% duty cycle. Suitable for cutting stainless steel, carbon steel, alloy steel, mild steel, copper, aluminum, etc. Recommended air compressor power: 4.2CFM @ 50-60 PSI, do not go over 120PSI or it will break the air compressor filter
【MIG Welding】MIG Torch model: L150-10E (IN PACK). Capable of both Gas MIG and Flux Core MIG welding. Up to 200A, 60% duty cycle, dual Voltage 110V/220V, 2T/4T optional, works on .030" .035" and .045" MIG wires, Aluminum MIG welding available. Built-in synergic control system. The arc is automatically stabilized, optimal pulse parameters are maintained to obtain the ideal weld formation, making it much easier for beginners. Spool Gun compatible (NOT included in pack)
【TIG Welding】TIG Torch model: WP-17 (IN PACK). High Frequency TIG welding mode, dual Voltage 110V (15~160A ,60% duty cycle@160A, 100% duty cycle@124A) / 220V (15~200A, 60% duty cycle@200A, 100% duty cycle@155A), 2T/4T semi-auto/full-auto modes available. 2T is good for accurate control and 4T can release your finger for a labor-saving effect. You can also adjust the pre-flow 0.2s-3s/post-flow 1s-5s to extend the service life of the torch head and consumables. Foot pedal compatible (NOT included in pack)
【STICK Welding】Up to180A output stick welding mode, dual voltage 110V (20-144A, 60% duty cycle@144A, 100% duty cycle@112A) / 220V (20-180A, 60% duty cycle@180A, 100% duty cycle@140A). Equipped with built-in over current, over heating and over load protection system which extend the lifespan of the machine. Good performance on E6010, 6013 and 7018 electrode, handles max. 5/32 inch(4.0mm) welding rods

SaleRank No. #8

H HZXVOGEN MIG Welder, 200A Gas MIG/Gasless MIG/HF TIG/Stick/Spot/Plasma Cutter Welder Combo 6 in 1 220V Aluminum MultiProcess Welder Machine 40Amp Max Cut 15mm

6 IN 1 Welder Combo: This welder combo max output is 200A with 220V , and it integrates high-frequency TIG, MMA, MIG Gas/Gasless, and CUT functions, catering to the diverse demands of professional welding and cutting tasks, Perfect for workshops, farms, or DIY dreams
40A Plasma Cutter：HF pilot arc plasma cutter input voltages is 220V, 60% duty cycle. It is recommended for cutting thicknesses up to 10mm-15mm, perfect to cut stainless steel, alloy steel, mild steel, copper, and aluminum
SYN & MAN MIG Modes: As a beginner, selecting the wire and material before welding. Welder machine can automatically match the recommend current and wire feeding speed. Or you can adjust the welding current If you have extensive welding experience
HF TIG Welding: This upgraded high-frequency tig function enables non-contact ,fast and stable arc starting, and easier operation.The welding effect is better than lift tig
Safety Protection: Built-in VRD、overcurrent、overvoltage、overcurrent、overload、overheat automatic protection function which effectively protects the internal circuit of the plasma cutter welder from damage, extend the service life of the machine

Rank No. #9

DECAPOWER 110/220V Dual Voltage Plasma Cutter Combo Welder Gas Gasless MIG Pulse/Stick/HF TIG/HF CUT PMCT-205 Multi Process Welding machine (PMCT with TIG TORCH)

【Function】Gas / Gasless MIG MAG Welding / Arc Stick MMA Welding / HF TIG Welding /HF Cutting. Available Models: MIG(SYN) / MIG(MAN) / MIG(PULSE,Only aluminium) / MMA /HF TIG /HF CUT
【Visualisation interface】The PMCT-205 is equipped with a large screen, making the interface easier to understand and operate.
【Welding wire】The PMCT-205 Can handle 2 lb and 10 lb rolls of wire sizes from 0.6mm/.023‘ to 1.2mm.045’ (available wire diameters vary by metal, check images)Ideal for 7018/6011/6010 electrode.
【You can do by it】 With a maximum welding current of 200A(220V)/125A(127V), a maximum cutting current of 50A(220V)/30A(127V), and a wide range of features, the PMCT-205 is ready for virtually all of your home and garage jobs.
【About Us】DECAPOWER is a brand created by the manufacturer of welding machines, we are committed to providing cost-effective products, but we also provide professional responses and after-sales service as a manufacturer.

Rank No. #10

Plasma Cutter TIG Welder With PULSE Stick Welder Machine 520TSCPF Plasma Cutter Welder Combo 200A TIG/ARC Welding 50A Air Plasma Cutting Dual Voltage 110/220V 1/2" Clean Cut Upgrade Digital Panel

520TSCPF 3 in 1 Multi-process Machine: The 520TSCPF realises plasma cutter, HF TIG welder and pulse TIG Welder, Stick / MMA / ARC welding as an integrated machine, space saving, making it the perfect model for DIY user. Upgraded digital panel to switch machine functions with the push of a button.
Plasma Cutter: 10-50Amp DC Inverter current output and HF arcing offers powerful cutting abilities; max ideal cutting thickness: 1/2”; Compact plasma cutter has a Handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
HF TIG Welder with PULSE: 10-200AMP DC TIG electric current output; The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life. Quality TIG welding on stainless or steel and precise welding of thinner-gauge materials. Easy work with foot-pedal (it is not included in standard accessories). Please make tungsten head sharp before using TIG welder, can get better welding in this way.
Stick / ARC / MMA Welder: Output current 10-180Amps, Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm.
Multiple uses: The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals; the machine cannot weld aluminum; ideal for a welding enthusiast or hobbyist with basic repair needs and general light welding requirements.

Last update on 2025-03-16 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best plasma cutter welder combo?

Do you get stressed out thinking about shopping for a great plasma cutter welder combo? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching plasma cutter welder combo, which is why we have assembled a comprehensive list of the greatest plasma cutter welder combo available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for plasma cutter welder combo that you consider buying. Your questions might include the following:

Is it worth buying an plasma cutter welder combo?
What benefits are there with buying an plasma cutter welder combo?
What factors deserve consideration when shopping for an effective plasma cutter welder combo?
Why is it crucial to invest in any plasma cutter welder combo, much less the best one?
Which plasma cutter welder combo are good in the current market?
Where can you find information like this about plasma cutter welder combo?

We’re convinced that you likely have far more questions than just these regarding plasma cutter welder combo, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for plasma cutter welder combo, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible plasma cutter welder combo. Make sure that you are only using trustworthy and credible websites and sources.

We provide an plasma cutter welder combo buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available plasma cutter welder combo currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of plasma cutter welder combo has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an plasma cutter welder combo?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your plasma cutter welder combo.
Customer Ratings: Number ratings grade plasma cutter welder combo objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their plasma cutter welder combo.
Product Quality: You don’t always get what you pay for with an plasma cutter welder combo, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an plasma cutter welder combo is should be an indication of how long it will work out for you.

We always remember that maintaining plasma cutter welder combo information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding plasma cutter welder combo is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best plasma cutter welder combo of 2022 – Reviewed and Top Rated

How Do You Buy The Best plasma cutter welder combo?

Related Post: