The Best Trailer Hubs of 2022 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Trailer Hubs of 2022. Check our ranking below.
2,397 Reviews Scanned
Rank No. #1
GREPSPUD 1 Set Trailer Hub Kits 5 on 4.5 for 3500 lbs 1-1/16'' to 1-3/8'' Tapered Axle, Idler Hub with Extra Dust Caps & Rubber Plugs, 5x4.5 Trailer Replacement Hub 5 Lug Bolt Trailer Wheel Hub Kit
- 【WITH EXTRA 2 DUST CAPS & 4 SEALS】- Fits 3500lbs 1-1/16'' to 1-3/8'' Trailer Axles, Spindle #84, EZ-Lube Axle. You will receive 1 set of 5x4.5'' trailer hub and all the hardware parts you will need, you don't have to go anywhere else to buy parts. Our kit also comes with extra 1pc dust caps & 2pcs rubber plugs, can be used as spare parts in case of emergency. This is a value-for-money set!
- 【SIZE & COMPATIBLE WITH】- Trailer axle dust cap (O.D: 1.98''), L44649 outer bearings (I.D: 1-1/16''), L68149 inner bearings (I.D: 1-3/8''), Grease seals (2.56" O.D - 1.72" I.D), Lug nuts (1/2''-20 thread). Please check the size information and compatibility carefully before placing an order. Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer.
- 【BOLT PATTERN】- 5 on 4.5'' bolt pattern idler hub with 1/2”-20 studs and bearing races installed.
- 【STURDY PACKAGING】- The trailer hubs are wrapped with a bubble bag. Other installation hardware are wrapped in white bubble bags. All parts are neatly placed in a sturdy cardboard box. The products are protected as much as possible during transportation to prevent deformation and wear.
- 【HEAVY DUTY & ANTI-RUST】- These hardware are made of high quality steel and rubber, strong and durable. Wheel hub surface with black coating, and dust cap surface zinc-plated, anti-corrosion & anti-rust, long-term service for your trailer.
Rank No. #2
2 Sets 2000lb Trailer Axle Trailer Hub Kit 5 Bolt 4.5",Trailer Hub 5 Lug fit 1" and 1-1/16" Trailer Straight Spindle,5×4.5 Trailer hubs,Boat Trailer Hubs 5 Lug(Only Fit Straight Spindle)
- Parameter specification：2000lbs trailer axle trailer hub kit.Fits both 1" and 1-1/16" diameter straight spindles.With 2pcs 1.25" ID and 2pcs 1.5" ID grease seal.With L44643 bearings (for 1'' axle), L44649 bearings (for 1-1/16'' axle),Don't worry about adaptation.★2000lb Trailer Axle hub kit fit straight spindle,not for tapered spindle.
- Anti-collision Packaging：Each set of Trailer hubs 5 lug independent box packaging, an outer box inside with two separate box packaging, a good solution to the transport process of collision wear, but also convenient for you to store, good packaging comes from our love for high-quality trailer hub assembly.★2000lb Trailer Axle hub kit fit straight spindle,not for tapered spindle.
- High standard：Trailer hub kit 5 bolts 4.5,in strict accordance with the US G3000 standard production,using high-quality materials.With excellent strength and rigidity,as well as better heat transfer performance,has a longer service life.★2000lb Trailer Axle hub kit fit straight spindle,not for tapered spindle.
- Product advantage：The trailer hub kit is coated in black and tested with 96h salt spray test to prevent corrosion and rust. Dust cover surface galvanized,not only beautiful but also wear-resistant.The hardness standard of the Lug nuts is 10.9,which solves the fracture problem well.Bearing high-quality steel,low noise and reduce the coefficient of friction of the wheel hub,completely solve the problem of trailer spindle shaking and oil leakage.★2000lb Trailer Axle hub kit fit straight spindle,not for tapered spindle.
- What you will get：2pcs hub kits (5 bolts 4.5 for 2000lbs), 4pcs L44649 bearings (I.D: 1-1/16"), 4pcs L44643 bearings (I.D: 1"), 10pcs Lug nuts (1-1/16" threads), 4PCS Dust Caps (O.D: 1.98"), 2PCS Grease Seals (O.D 1.98" - I.D 1.25").2PCS Grease Seals (O.D 1.98" - I.D 1.5"),2Pcs Cotter Pins (Length: 2.3")（PS.Not include castle nuts)★2000lb Trailer Axle hub kit fit straight spindle,not for tapered spindle.
Rank No. #3
2 Sets 3500Lbs Trailer Hub Kit 5 Bolt 4.5",5 Lug Trailer Hub Fit 1-1/16" to 1-3/8" Trailer Tapered Spindle,Boat Trailer Hubs 5 Lug,Trailer Wheel Hub Kit(Not fit Straight Spindle)
- 5×4.5" Trailer Hub FIT：Trailer hub kit 5 bolt 4.5 3500lb fits 1-1/16" to 1-3/8" axles (#84 Spindle EZ-Lube Axle).Compatible with Dexter/ for Al-Ko/ for Lippert/ for Quality and other brands 3,500lbs trailer axles; Only works on models for L44649 outer cone bearings 1-1/16'' to 1-3/8'' (for L68149) inner cone bearings trailer axles ★3500lb Trailer Axle hub kit fit tapered spindle,not for straight spindle.
- Anti-collision Packaging：Each set of Trailer hubs 5 lug independent box packaging, an outer box inside with two separate box packaging, a good solution to the transport process of collision wear, but also convenient for you to store, good packaging comes from our love for high-quality trailer hub assembly.★3500lb Trailer Axle hub kit fit tapered spindle,not for straight spindle.
- High standard：Trailer hub kit 5 bolts 4.5,in strict accordance with the US G3000 standard production,using high-quality gray cast iron materials.With excellent strength and rigidity,as well as better heat transfer performance,has a longer service life.★3500lb Trailer Axle hub kit fit tapered spindle,not for straight spindle.
- Product advantage：The trailer hub kit is coated in black and tested with 96h salt spray test to prevent corrosion and rust. Dust cover surface galvanized,not only beautiful but also wear-resistant.The hardness standard of the Lug nuts is 10.9,which solves the fracture problem well.Bearing high-quality steel,low noise and reduce the coefficient of friction of the wheel hub,completely solve the problem of trailer spindle shaking and oil leakage.★3500lb Trailer Axle hub kit fit tapered spindle,not for straight spindle.
- What you will get：2pcs hub kits (5 bolts 4.5 for 3500lbs), 2pcs L44649 Outer bearings (I.D: 1-1/16"), 2pcs L68149 Inner bearings (I.D: 1-3/8"), 10pcs Lug nuts (1/2"-20 threads), 4PCS Dust Caps (O.D: 1.98"), 2PCS Grease Seals (O.D 2.56" - I.D 1.72"). 2PCS Washer(I.D: 1"), 2PCS Castle nuts(I.D: 1"), 2PCS Cotter Pins(L: 2.25").The trailer hub kit contains all accessories required for installation.★3500lb Trailer Axle hub kit fit tapered spindle,not for straight spindle.
Rank No. #4
GREPSPUD 2 Sets Trailer Hub Kits 5 on 4.5'' for 2000 lbs 1-1/16'' Straight Spindle, Pre-Installed Prelubricated L44649 Bearings 1.25''ID Grease Seals 5x4.5 Trailer Idler Hub Kit 5 Lug Bolt Wheel Hubs
- APPLY TO: For 2000lbs trailer axles. Suitable for 1-1/16'' diameter straight spindles, not suit for tapered spindles. Fits 1.25" I.D. grease seals and 1-1/16'' I.D. L44649 outer & inner bearings. Please check your spindle size before your order.
- DIMENSION: Please check the dimension picture. Please confirm the size before purchase to avoid delayed repair and replacement due to wrong size. 2PCS 2000lbs 5x4.5'' hubs (O.D: 5.66'', I.D: 1.98'', H: 4.25''), 4PCS L44649 bearings (I.D: 1-1/16''), 10PCS lug nuts (1/2''-20 thread), 2PCS grease seals (I.D: 1.25"), 2PCS spindle nuts (1'' thread), 2PCS metal washers (I.D: 1''), 2PCS cotter pins (L: 2.3"), 2PCS dust caps (O.D: 1.98''), 2PCS rubber plugs (for 1.18'' hole).
- PRE-ASSEMBLED & PRE LUBRICATION: The L44649 bearings and 1.25" I.D. grease seals are pre-assembled and lubricated with grease. This kit includes all the necessary parts for installation, you can directly install them on the trailer axle. You don't have to go anywhere else to buy parts.
- STURDY & ANTI-RUST: These hardware are made of high quality steel and rubber, heavy duty and long service life. Wheel hub surface with black coating, and dust cap surface zinc-plated, anti-corrosion & anti-rust. The bearings have high precision, low friction and low noise. Value for money, long-term service for your trailer.
- STURDY PACKAGING: The trailer hubs are wrapped with bubble bags. The bearings and grease seals have been pre assembled on the hubs. Other installation hardware are wrapped in white bubble bags. All parts are neatly placed in a sturdy cardboard box. The products are protected as much as possible during transportation to prevent deformation and wear.
Rank No. #5
iBroPrat 2Sets 3500Lb Trailer Idler Hub Kits 5 Bolt 4.5, Trailer Idler 5 Lug Hub Kits Pre-Installed and Lubricated for 3500 lbs 1-1/16'' to 1-3/8'' #84 Spindle Tapered Axle
- 【FIT】For trailer idler hub 5 on 4-1/2" for 3,500 lbs trailer axle.Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle.Please measure the old hub size.And confirm that the bearings are L44649 and L68149.
- 【HOW TO MEASURE BOLT PATTERN】LENGTH A-5 lug is from the OUTERMOST point of a hole to the CENTER of the second hole.LENGTH D: The Center of hole to the center of the bolt hole next to it.if the length A of measurement is 4.5", the length D of measurement is 2-5/8" and as there are 5 lugs, then the bolt pattern is 5x4.5".If you do not know how to measure, please refer to image 3.
- 【PRE-ASSEMBLY AND LUBRICATION】All accessories are pre-installed.Pre-lubrication of bearings with grease.Sealed with plastic caps to prevent leakage.Grind OD to a taper around leading edge of the cap. Very easy to install compared to hubs that are not pre-installed.
- 【HIGH QUALITY】Strictly following the U.S. G3000 standard, the hub is made of high-quality carbon steel with anti-rust surface treatment; the bearing is made of high-quality bearing steel with precision bearings for low working noise; the grease seal adopts a double-lip design for no leakage.
- 【SIZE & QUANTITY】2PCS Hubs(5 bolt 4.5 for 3500lb), 2PCS L44649 outer bearings (I.D: 1-1/16''), 2PCS L68149 inner bearings (I.D: 1-3/8''), 10PCS Lug nuts (1/2''-20 thread), 2PCS Washer(I.D: 1"), 2PCS Spindle nuts(I.D: 1"), 2PCS Cotter Pins(L: 2.25"), 2PCS Grease seals (171255TB, 1.719'' I.D), 2PCS Dust caps (O.D: 1.98''), 2PCS Rubber Plugs (2.56" O.D - 1.72" I.D). Please check the image.
Rank No. #6
GREPSPUD 2 Sets Trailer Hub Kits 5 on 4.5'' for 3500 lbs 1-1/16'' to 1-3/8'' #84 Tapered Axle, Prelubricated L44649 L68149 Bearings 5x4.5 Trailer Replacement Idler Hub 5 Lug Bolt Trailer Wheel Hub Kit
- APPLY TO: Fits 3500lbs Trailer 1-1/16'' to 1-3/8'' Tapered Axles EZ-Lube #84 Spindle, not for straight spindle. Fits L44649 outer bearing and L68149 inner bearing
- SIZE: Please check the size picture, 5 bolts pattern is from the OUTERMOST point of a hole to the CENTER of another hole. Please measure the size before purchase to avoid delayed repair and replacement due to wrong size
- PRE LUBRICATION: The bearings and grease seals are pre-assembled and lubricated with grease. This kit includes all the necessary parts for installation, you can directly install them on the trailer axle. You don't have to go anywhere else to buy parts
- STURDY & ANTI-RUST: These hardware are made of high quality steel and rubber, heavy duty and long service life. Wheel hub surface with black coating, and dust cap surface zinc-plated, anti-corrosion & anti-rust. The bearings have high precision, low friction and low noise. Value for money, long-term service for your trailer
- STURDY PACKAGING: The trailer hubs are wrapped with bubble bags. The bearings and grease seals have been pre assembled on the hubs. Other installation hardware are wrapped in white bubble bags. All parts are neatly placed in a sturdy cardboard box. The products are protected as much as possible during transportation to prevent deformation and wear
Rank No. #7
Trailer Idler Hub Kit, 5-Hole, 4.5" Bolt Idler Hub for 3500lb Trailer, Suit 1-1/16“-1-3/8” Spindle with Dust Caps & Rubber Plugs, Trailer Wheel Hub Assembly (Set-2, Only Fit for Tapered Spindle)
- Premium Material: This wheel Idler Hub is made of high-quality iron and uses electroplating technology to protect the Idler Hub body, enabling it to work normally in various environments. At the same time, the Idler Hub is resistant to rust and corrosion, greatly extending the service life of the product.
- About The Idler Hub: Classic design and rich production experience make the Idler Hub more excellent response, in a variety of harsh environments can achieve a short period of emergency braking, so that your journey is safer. It’s designed for 3500lb Axles.
- Package Including: 2*wheel Hub 5*4.5"; 2*bearing inner ring replace for L68149(O.D: 2.16", I.D: 1.377" ); 2*bearing inner ring replace for L44649(O.D: 2.058", I.D:1.062" ); 2*oil seal(I.D: 1.718" O.D: 2.56" height: 0.5"); 2*dust cover(Mounting diameter:1.988"); 10*hub nut(1/2-20UNF).
- Suit for: Fits 1-1/16'' to 1-3/8'' spindles 3,500 pounds trailer. Not fit for 1-1/16" Straight spindle and 1" Straight spindle.
- About Installing: 1. The torque is 60 N.M during pre-tightening. 2.Torque is 100 N.M when tightening. 3. After the fastening is completed, the car body is completely landed and the nut is again tightened diagonally in turn to achieve normal torque, It's 150 N.M.
Rank No. #8
Seachoice Trailer Wheel Hub, 1-3/8 in. X 1-1/16 in. Axle, 5 Lug, Galvanized, Pregreased Grey
- Cast galvanized wheel hub kit for boat trailers
- Kit includes pre-greased bearings, seals, dust caps, lug nuts and a cotter pin
- 5 UHI lugs on a 4.5" bolt pattern
- Capacity: 1,750 lbs.
- Easy to install with common tools and fasteners
Rank No. #9
Rigid Hitch Incorporated Trailer Hub Kit (BT-150-F) 5 Bolt on 4-1/2 Inch Circle - Fits 1" and 1-1/16" Spindle
- 【COMPATIBLE WITH】This trailer hub kit 5 bolt 4.5 fits trailer axle 2000 lbs e Axle.Fits both 1" and 1-1/16" Straight Spindle. Includes L44649 and L44643 bearings, 1.25“ and 1.5” grease seals. No matter what type of shaft you have, it will work!
- 【HOW TO MEASURE HUB BOLT PATTERN】5 lug is from the OUTERMOST point of a hole to the CENTER of another hole.Please measure the size before purchase to avoid delayed repair and replacement due to wrong size.
- 【STURDY】Compliant with US G3000 standards. Made of high quality carbon steel. Heavy duty and long service life. Surface paint treatment to effectively avoid rust and corrosion. The bearings have high precision, low friction and low noise. Thick grease seal, no leakage.If you are paying for quality, something will last you longer and then save you money.
- 【SIZE AND QUANTITY】KITS INCLUD: 2pcs L44649 Bearings,2pcs L44643 Bearings, Grease Seal I.D: 1.25", Grease Seal I.D: 1.5", Dust Cap, 4pcs Rubber Plugs, 5pcs Nuts 1/2"-20 thread, Cotter Pins L: 2.25".
Rank No. #10
AEagle 2 Sets 5 on 4.5" Bolt Circle Hot-Galvanized Idler Hub Kits for 3,500lbs Boat Trailer 1-1/16'' to 1-3/8'' Tapered Axle, Inner & Outer Cone Bearings
- Compatible with: Fit: For other brands 3,500lbs trailer axles; Only works on models for 1-1/16'' to 1-3/8'' tapered axle
- Kit Includes: 2x 5-Hole 4.5" brake hot-galvanized idler hub; 2x inner cone bearing fit for L68149(I.D: 1-3/8"); 2x outer cone bearing fit for L44649(I.D: 1-1/16"); 2x grease seal; 2x rubber plug dust cover; 10x hub nut
- Production and Installation: Strictly follow automotive standards and comply with the G3000 standard in the US; Easy to install
- Product Process: The brake is made of high-quality brittle gray cast iron with a galvanized surface. The product is sturdy, durable, and has a long use time
- Quality Assurance: 12-month warranty! Tested before shipping.
Last update on 2025-07-01 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Trailer Hubs?
Do you get stressed out thinking about shopping for a great Trailer Hubs? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Trailer Hubs, which is why we have assembled a comprehensive list of the greatest Trailer Hubs available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Trailer Hubs that you consider buying. Your questions might include the following:
- Is it worth buying an Trailer Hubs?
- What benefits are there with buying an Trailer Hubs?
- What factors deserve consideration when shopping for an effective Trailer Hubs?
- Why is it crucial to invest in any Trailer Hubs, much less the best one?
- Which Trailer Hubs are good in the current market?
- Where can you find information like this about Trailer Hubs?
We’re convinced that you likely have far more questions than just these regarding Trailer Hubs, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Trailer Hubs, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Trailer Hubs. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Trailer Hubs buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Trailer Hubs currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Trailer Hubs has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Trailer Hubs?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Trailer Hubs.
- Customer Ratings: Number ratings grade Trailer Hubs objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Trailer Hubs.
- Product Quality: You don’t always get what you pay for with an Trailer Hubs, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Trailer Hubs is should be an indication of how long it will work out for you.
We always remember that maintaining Trailer Hubs information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Trailer Hubs is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.